Your cart is empty.
Your cart is empty.Bones Bearings bearing tool. It acts as both a bearing press and a puller. It works with 8mm bearings and for the 90% of people not using spacers in their wheels. It is designed to press the bearings putting only force on the inner race so you wont dent your shields. Ball detent technology and small enough to fit in your pocket and make it your keychain.
Adam Esquivel
Reviewed in the United States on March 19, 2024
I'm able to clean my quads and inlines now. YAY!
Customer
Reviewed in India on June 9, 2023
Product build quality is good but too costly and not does his work, it doesn't pull bearing and need to struggle a lot , we can pull bearing from nail easily but not from this tool.
Lisa
Reviewed in the United States on December 17, 2020
I used this to clean out my wheels of my outdoor skates. Turns out I have sealed ball bearings, but I still needed to remove them to clean my wheels. This bearing press puller is easy to use and made well.I recommend this product.
Maxime
Reviewed in Canada on June 26, 2019
Produit beaucoup trop cheap pour le prix demandé. Gros défaut de conception: la tige d'extraction est attachée au support en plastique. Le plastique est trop fin et casse.Si vos bearings rentrent facilement dans vos roues, cet extracteur fonctionne, mais dans ce cas pas besoin d'un extracteur, les trucks ou un tournevis suffisent. Si vos bearings sont durs a sortir, l'extracteur est trop cheap pour aider et va briser.Conclusion: ne pas acheter, beaucoup trop cher pour un produit aussi mal conçu, le rendant inutile et de mauvaise qualité.
mohit
Reviewed in India on November 30, 2018
Nice
Honest reviews
Reviewed in the United States on February 21, 2017
This thing is cool if you wanna pull yout bearings out super quick without damaging them then this tool is the one you want. Ive been skating awhile and have messed up several sets of bearing due to removing from old wheels. Tapping them out of the wheel or using your truck to get them out can damage the outter race which will no longer roll good. So if this problem is what your having i suggest this awesome tool. Easy to carry and small so fitting it in your pockect is not a problem. Thanks Bones awesome product.
Customer
Reviewed in India on July 15, 2016
Very nice
E. M. Waydick
Reviewed in the United States on December 8, 2016
Puller works as expected, but the handle is a little small and not ergonomically contoured well. The edges of the handle bite into my fingers if I have a jammed bearing in a wheel. The hole for a key ring was a little smaller than needed for flexible positioning in a pocket, and far enough from the edge to make installing a ring harder than it needed to be. Over time, the hole will wear wider and the ring will tilt more.Overall, this is a solid tool that works as intended to pull bearings from skates, but if using steel inside spacers, the bearing has to be rocked out slightly before the balls of the tool will grab it.
John Techs
Reviewed in the United States on January 5, 2016
I live by the beach in Miami and use my longboard to get around almost everywhere, including to and from work as far as 6 miles each way. with all the puddles, sand and surprise florida downpours, i end up cleaning both mine and my girlfriends bearings quite often. I personally don't like using my trucks axles to pry out the bearings so I wanted something that I could use regularly to do this without damaging the bearings. This tool is amazing, its the size of a large keychain trinket, just a few inches long but made sturdy of all metal. The two balls on the end retract when you push the button at the top, allowing you to push it through the bearing, release the button and easily pull the bearing out, if you have spacers like me, you can use this tool just like your truck axels, insert it into the bearing, and use it as a lever to pry the bearing out. it fits so well into the center of the bearing that this causes no damage whatsoever. and it works just as well to push them back in.
Blarney77
Reviewed in the United States on April 21, 2016
Works great. Excellent way to remove bearings safely and easily. This is a great tool!! Small and stores easily. Just replaced an entire set of wheels with all new bearings and was a snap. I removed the bearings from the old wheels very easily and no damage tot he bearings.
Craig Slade
Reviewed in Canada on September 1, 2015
Good quality tool
M. Richins
Reviewed in the United States on July 21, 2015
If you break this product, you must be REALLY pulling/pushing on it. This is a great product and it's really easy to use. Before I bought this I used a screwdriver and my thumbs to put in and push out my bearings. But with this, I can do it really easy. I don't even need to touch the bearings. This is great if you take out an put in bearings a lot. It doesn't damage them at all.
Yon Park
Reviewed in the United States on March 21, 2014
Best $15 I have spent so far in my short derby career. It took me 10 minutes to switch out my bearings, and most of that was cleaning the gunk off of them. It was a pleasure to pull and press them in, and I didn't feel like I was damaging my wheels like I did when I used a screwdriver to remove them. It is super small and easy to carry. I would like to sing love songs about this bearing press/puller.
Recommended Products
