Your cart is empty.
Your cart is empty.Product Description
Work Smarter and More Comfortably with BONTEC Single Monitor Desk Mount
BONTEC single monitor desk mount, designed to enhance productivity and comfort. Suitable for 13-34 inch flat and curved screens, this mount supports up to 22 lbs, making it perfect for a wide range of monitors.
Efficient Use of Space
Elevates the screen to optimal heights, maximize desk space utilization, making the workspace more organized and efficient.
-
±15° tilt adjustment to reduce glare and neck strain.
-
Effortlessly rotate your screen 360° around the pole for the perfect viewing angle.
-
Supports switching between landscape and portrait modes to accommodate various tasks.
-
The monitor can be effortlessly raised and lowered along a 16.73 inch high pole.
-
Locked: No tilt or swivel adjustments.
It comes with a locking screw on the back of the joint to prevent monitor drooping.
Ergonomic Design
By using this single monitor stand, it allows you to improve your posture and reduce fatigue with a more comfortable monitor setup.
Cable Management System
Keep your desk clutter-free with our integrated cable management system and convenient Allen key storage slot.
2 Installation Options
Desk Clamp Install: Heavy-duty "C" clamp suitable for desk thickness between 0.39" and 3.35", providing maximum stability.
Grommet Base Install: Suitable for desks with bolt-through holes (hole diameter from 0.39" to 3.35"), supporting desk thickness from 0.39" to 3.15".
Balraj sivia
Reviewed in the United States on March 9, 2025
The screws to hold the screen are too long i have to put my own bunch of washers to make them screen to hold the screen… if they include some runners pads to put inbetween the screws n screen.. that would be great otherwise it’s Okie product
Cliente
Reviewed in Spain on March 4, 2025
El brazo un poco corto para lo que yo quería, pero buen producto.
Michael
Reviewed in the United States on March 14, 2025
Great monitor stand. Works well and easy to put together.
gsister
Reviewed in France on January 24, 2025
TRES BON PRODUIT
FelipeB
Reviewed in the United States on January 21, 2025
Excelente calida y buen precio
Net Prophet
Reviewed in the United States on August 21, 2024
I recently received this stand to use with my monitor. I have a normal sized monitor but this stand is also able to accommodate bigger and even curved monitors. The stand works with monitors from 13 to 34 inches and up to 22lbs.The stand has a wide range of adjustments. You can tilt the screen ±15° and rotate it 360° from landscape to portrait mode. It’s easily adjustable along a 16.73" high pole so you can keep the space under the monitor clear for other stuff. Once you find your preferred setup, the back screw lock adds an extra layer of security, keeping your monitor firmly in place. It also means you can elevate your monitor to eye level to reduce neck and eye strain.It has a removable VESA plate that makes it easy to install on many different monitors. There are two ways to install the mount on your desk: a heavy-duty "C" clamp that clamps the stand to the back of your desk or a grommet base for desks with bolt-through holes. Though the bolt-through hole method is probably more stable, my desk doesn’t have a bolt-through hole and it’s a rental so I can’t drill a hole. I went with the clamp. The stand has a built-in cable management system to keep several cables in check. It comes with easy instructions and the mount has a place to store the allen keys you need to make adjustments.I can think of only one scenario where you couldn’t use this mount: desks where you cannot or don’t want to drill a bolt-through hole and where the back is obstructed (i.e., integrated bookshelves) or flat with no ledge for the clamp. Other than that, it should work for you.
All good besides the stability
Reviewed in Poland on December 20, 2024
Ekran 34 cale nie chwieje się na biurku do pracy stojącej.
Tima
Reviewed in the United States on December 18, 2024
The BONTEC single monitor desk mount is excellent for reclaiming some real estate on your desk. My sister has a small desk with a hutch. It limited the desk space and didn't fit her new monitor. So I convinced her to remove the hutch, add some floating shelves on the wall, and mount the monitor. The BONTEC single monitor is very easy to install and sturdy. However, make sure that your desk has the clearance to add the clamp to avoid drowning holes in your desk. My sister's desk had a hole for wires in the middle, so I used that hole to mount the pole securely. My sister is happy with the setup.
Mr D
Reviewed in the United Kingdom on November 8, 2024
Feels lightweight, which explains the weight of the item in the description.Putting it together was not bad. There are 2 screws that hold the plates together, I wish there were more, when they are 4 holes available. Then, these screws were surprisingly short. If one fails then the other one is redundant.This is used to hold up a 24" flat monitor that weighs about 4kg. I like how all the screws and various bits and pieces fit well together - apart from the attention needed for the two screws I said earlier. The four screws for the vesa mount were very good fit. I have put a few monitors on to various mounting plates before, there is always one or two things that make it not a tight fit. However if the screws is good length and fit, it can solve a lot of issues. This is the case here. Plus these are thumb screws.I fit this to the top of the book case which aligns well with the rest of the monitors on my desk. I can't screw this to the side of my desk because the plate is larger than the bar round my desk. Further I will be using that 24" monitor on the go and that's why I chose this stand hoping that it is really as lightweight as it claims (which it is) and can be assemble and removed with little fuss, and the stand can be put into a bag and not take too much space, again, it ticks that box.Some might be concerned, as I was, that the height of the pole does not go far enough. For the moment this is ok. For my use I need a stand to secure the monitor. It has a built in stand which is not as secure as it looks, e.g. it won't prevent the monitor slipping. So long I find an edge to clip the stand, the monitor goes on it, that will be fine for me.
cl
Reviewed in the United States on November 7, 2024
I recently got myself a standing desk at home and I no longer wanted my monitor on the desk (smaller desk) to save space. I saw this monitor mount for $30 and took a chance on it. Despite the price, the mount is solid (heavy) you get two options of monitor (flat/curved) brackets. I have a flat monitor so I choose the flat bracket. The install took about 10 mins its very sturdy and with my desk elevating high and low often there is no movement of the monitor at all, its very solid mount
ropd147
Reviewed in Belgium on November 18, 2024
This is type of stuff I love from Amazon. Very decent product that can easily hold my 34 inch widescreen monitor. Setup only took 15 minutes. Perfect price quality.
Bill H.
Reviewed in the United States on October 8, 2024
The BONTEC Single Monitor Desk Mount is a versatile and practical solution for anyone looking to enhance their workspace with a sleek and functional monitor mount. Designed to accommodate screens ranging from 13 to 34 inches and supporting up to 22lbs, this mount offers full motion adjustability, dual installation options, and integrated cable management for a clutter-free setup.This desk mount is compatible with most monitors measuring between 13 to 34 inches, making it ideal for a variety of setups. Enjoy the flexibility of adjusting your monitor to the perfect viewing angle with 360-degree rotation, ±90-degree tilt, and ±180-degree swivel capabilities. The mount can be installed using either a C-clamp or a grommet base, providing flexibility in how you set up your workstation. Keep your workspace organized and free of clutter with the integrated cable management system that hides wires and cables from view.Having personally used the BONTEC Single Monitor Desk Mount, I appreciate the ease of installation and the sturdiness of the mount. The full motion adjustability allows me to easily switch between landscape and portrait mode depending on the task at hand. The integrated cable management system is great, keeping my desk looking neat and organized.Overall, the BONTEC Single Monitor Desk Mount is a reliable and stylish accessory for anyone looking to upgrade their workspace. With its wide compatibility, full motion adjustability, dual installation options, and integrated cable management, this desk mount offers a range of benefits that can enhance your productivity and comfort while working.
Recommended Products