Shopping Cart

Your cart is empty.

Your cart is empty.

Boosted Board Kevlar Belts for Boosted Board V2, Mini S, Mini X, Plus, and Stealth - Reinforced Kevlar / 350 Miles Normal Tested | Much Stronger Than Original Boosted Belts

Free shipping on orders over $29.99

$16.90

$ 6 .99 $6.99

In Stock

About this item

  • WHY CHOOSE US? :If you are not 100% satisfied with your belts, contact us and we will help you solve the probelm even the normal return window have closed,while we still offer our after-service for your order.
  • COMPATIBLE MODELS:The boosted board belts come with 2pack (means a pair belts) that's will fit your boosted board models including Boosted Boards V2, Mini S, Mini X, Boosted Boards Plus and Stealth,But not compatible with Boosted Board V1 as the different length.
  • INSTALLATION AND TENSION ADJUSTMENT: You need to use the wrench to remove the bolts and the broken belts and then use the new betls to replace,(You can watch details video in social media for install steps),The most important step is you need to adjust the belts in right position with suitable tension for your booted board,
  • DIFFERENT MATERIAL WITH DIFFERENT DURABILITY: kevlar material much better than the fiberglass,as kevlar as military material frequently used in military body armour and tank teeth.But the original material is fiberglass and many other belts also made of fiberglass,it’s also durable.
  • PERFECT FIT &MILEAGE TEST: The boosted belts with the same teeth as the original belts you have,so don't worry the belts can't fit your boosted and occure slipping off,become loosen or make noise when riding.As there many riders have test it several months and more than 300miles in diffrent riding models and still no problems.


Kevlar Lasted Bossted Board Belts[A real San Francisco Boosted Rider real experiecnce after assemble the belts]
I made it to 465 miles on my originals and had to replace because of a belt broke off mid-ride.So far, I have ridden it 350 miles and first pair is still doing well, so if you are in need for belts asap, I would recommend these cheap ones, 2-4 days shipping is great.

Specifications
Package: 2 Belts
Material:Kevlar
Compatible:V2, Mini S, Mini X, Plus and Stealth
Tested Miles:290Miles and still no problem
Tested Boosted Model:Boosted Mini S
Tested Riding Style:Normal Riding(Not Agressive riding)
Brand: Kutrick
Price is for 2 Belsts
The Boosted Borad Belts fit for Boosted Model V2, Mini S, Mini X, Boosted Boards Plus and Stealth.NOT compatible with Boosted Board V1 as the length is difference.
1)Top selling [Kevlar] boosted belts in this market,Great alternative + very affordable with great quality and price!
2)Easily installed it into your board and riding Acceleration is fine and noise was fine.
3)Compatible with Boosted Boards V2, Mini S, Mini X, Boosted Boards Plus and Stealth.NOT compatible with Boosted Board V1 as the length is difference.
4)The belt made of Miritary Kevlar with good tensile strength and elongation hardness (Fiberglass Cord with a Chloroprene core covered with Nylon)
5)Gateds belts,it's worth purhcase and we offer the after-service for the belts.Any problem just contact with us.


Ken Kersh
Reviewed in the United States on January 1, 2025
Clutch for my boosted board and needing them for repairs and swapping out the old parts.
Lucasdiegomunoz
Reviewed in the United States on March 18, 2024
Fits like a dream
CRFTEE
Reviewed in the United States on May 15, 2023
Perfect Fit for my Boosted Mini X. One original belt broke, replaced both with these. They went on easily but make sure to get the correct tension on both wheels/motors, that's the tricky part. They seem stronger and better built than original belts.
ryanne
Reviewed in the United States on August 11, 2022
Good belts , I have bought a few sets , most of them last 40 miles , not bad for a few bucks 👍
Tyler
Reviewed in Australia on September 11, 2020
I ordered the set of 8 and I only received 2.... I then went to put these on and they were too big for the boosted board stealth. Very unhappy. DO NOT BUY
Nicolle
Reviewed in the United States on February 11, 2020
i have a stealth mode boosted board. my normal boosted board belts would go out every couple months. these haven’t been ruined (which is inevitable) so i don’t know a comparison for time. what i can say is that these seem to be a lot more durable already. it seems slightly smaller than the boosted belts so they’re able to be a lot tighter (which i like). because of this they seem to rotate better, they accelerate faster and slow down a lot smoother. from what i’ve read these last longer, but even if they don’t i will probably be getting these again!
Omar Alomar
Reviewed in the United States on August 25, 2019
These belts fit perfectly on my Boosted Mini X with no issues. I have put over 250 miles on these belts (riding aggressively) , and they have barely shown any signs of wear or tear. Will be buying again.
G
Reviewed in the United States on December 2, 2019
Really impressed with this product. I have a Boosted Board V2, and I was disappointed when my OEM belt broke only about 50 miles into ownership. I replaced only the broken belt at the time, and now about 200 miles later, the wheel with the Kutrick belt can be observed to accelerate more quickly, and visual inspection reveals that it is also in notably better condition. This could be because it is newer, but in my opinion the difference is so great that the belt must just be better made. Definitely recommended.
jordan
Reviewed in Australia on November 11, 2019
They work better then the stock belts done 423 km ( in not converting for you Americans)
David Cho
Reviewed in the United States on October 21, 2019
there are a few minor differences between these belts and stock:- Kevlar fibers stick out from the sides of the belts as they wear.- Higher pitch sound versus the stock gates belts.So far, I've put about ~200 miles on them and they're holding up just fine.I'm a fairly light rider (135lbs) and there aren't many inclines where I live but the quality of the road is abysmal and I tend to ride my board very aggressively.Overall, I'd recommend these belts as long as you don't mind the slight difference in how your board sounds.(I did a side by side comparison with gates belts vs the kevlar ones. the sound difference is not due to the motors.)
Recommended Products