Your cart is empty.
Your cart is empty.This Bosch 18V PROFACTOR™ hammer drill/driver is built for tough drilling and driving jobs, especially drilling large holes straight. The 1/2 In. GSB18V-1330C Hammer Drill/Driver is part of the PROFACTOR™ System, which pairs BITURBO Brushless™ Technology with a CORE18V® High Power Battery. BITURBO Brushless™ Technology is a high-performance motor and drive-train system designed to deliver power comparable to high-demand corded tools. This GSB18V-1330C 18V Connected-Ready 1/2 In. Hammer Drill/Driver features connectivity (module sold separately), linking to connected device via Bosch Toolbox App to customize settings, set custom angles, receive feedback and set specific angles for the Electronic Angle Detection feature. It has a powerful brushless motor that provides efficient power for up to 1,330 In.-Lbs. of max torque. It has variable speed settings: high speed (0-2,200 rpm) and high power (0-550 rpm). The hammer drill/driver has KickBack Control, which helps reduce the risk of injury from sudden rotational torque reaction in a bind-up scenario and Electronic Angle Detection to ensure accurate drilling at angle. The 25 clutch settings help reduce fastener damage. It has an all-metal chuck that provides durability, and it has a longer belt clip for a more secure hold.
SPFMNE
Reviewed in the United States on February 17, 2025
Thr only other pro class bluetooth controlled hammer drill is milwaukee onekey 2960-20; about $100 more for tool only. The handle is a unicorn.
José Luis Zavala Guzmán
Reviewed in the United States on January 31, 2025
Exelente para el trabajo rudo
olinga Philip
Reviewed in the United Arab Emirates on January 27, 2025
best drill ever bought, highly recommended. True beast
محمد رجب
Reviewed in Saudi Arabia on July 14, 2024
ممتاز
Andrew
Reviewed in the United States on June 3, 2024
I was installing a new gate with the latch that drops downward into the ground, and I needed to drill a 1" hole in concrete. Burned out my corded, 4 amp drill, which was fine for small concrete anchors in cinderblocks, but not for a 1" hole in concrete retaining wall blocks. You need a hammer drill for that.Happily, this guy got the job done, and was forever dubbed, "Drilliam Hammersmith."
Ben
Reviewed in Canada on March 26, 2024
Un monstre!Wow le pouvoir est superFait pour de gros travaux exigeants5/5
Customer
Reviewed in the United States on November 27, 2024
TL;DR: The drill works great and has plenty of power behind it but is let down by the chuck.I've now used it in masonry, wood, and metal projects and the power of the drill was more than adequate for the job.I used the Irwin Speedbor auger bits to drill 1-1/8" holes through some old, tough, wooden joists to run some wiring and it ripped through them without hesitation.I also had to widen some holes in some heavy duty shelving where manufacturing had slightly undersized some of the 1/2" holes for the casters. I would estimate that at most I was widening the hole by 1/16".Fortunately I had some brand new, very sharp, and very high quality M35 (5% Cobalt), straight shank, 1/2" bits. I put one in and tightened it down. The moment it began to cut into the metal, the bit froze and the chuck started spinning on the shank of the drill bits.At that point, I thought I hadn't tightened it enough, so I really cranked down on the chuck to make sure it was firmly in place, and the same thing happened, with the bit spinning over the surface of the drill bits.I eventually dug around and found a cheap set of bits that had a 1/2" twist drill with a 3/8" shank that also had a flat ground into it. That went through the metal without even blinking.I'm extremely disappointed by the holding power of the chuck. Given the drill had more than enough power to go through the metal, it's highly disappointing that the chuck couldn't properly grip the shaft of the bit. This may only be a problem in larger diameters (I haven't had problems with smaller bits), but that's when you really need the best grip. Being able to hold up to 13mm was one of the major reasons for buying this drill too.Regrettably this appears to be a great drill being held back by a chuck not built to the same quality.
Luis Ángel
Reviewed in Mexico on October 29, 2024
Lo mejor es la fuerza que tiene y que tiene todas las funciones (taladro, atornillador y percutor).Exelente compra no duden en comprarlo.Si ya cuentan con baterias de la marca está es su mejor opción, gran complemento con los accesorios.
Emmanuel M.
Reviewed in the United States on April 14, 2024
The best hammer drill on this category
Cesar T.
Reviewed in Mexico on September 6, 2023
el taladro cumple 100 % con el torque, tiene mucha fuerza, probado con una pila bosch de 8 amperes, taladra muy bien concreto, ladrillo, y metal, madera, si lo requieres para trabajo de fuerza es excelente, si lo quieres solo para quitar tornillos por ejemplo cuando quieres quitar tapas y bocinas de puertas de auto es muy pesado con la batería de 8 amperes. lo recomiendo, soy electricista y funciono para traspasar cable de pared a pared.
John m
Reviewed in the United States on August 23, 2023
Maybe it's not the power champ like that ugly new gray brand, but who's maxing out their drill every time. So give me this one that will hang with any drill all day long, loaded with tech and good looks. Put an 8 ah battery on it and I'll take the Bosch to any drill fight anytime . If you're complaining about the lights not being around the chuck, eventually the handle would block one light and you'd complain about that...
Alexander S
Reviewed in the United States on July 19, 2023
This drill is top notch. Very well made and extremely powerful. Definitely has some unnecessary frills, but better to "have and not need" I suppose. After having my last 18v bosch cordless drill for almost 10 years, it was time for a replacement. Expecting this one to last just as long!Edit: Had a problem where this drill ceased operation unexpectedly without reason. Bosch had a new one to me in less than a week. Hopefully an isolated incident, but fantastic manufacturer support!
Paul Fox
Reviewed in the United States on November 26, 2023
This drill is powerful, and it automatically stops if you bind, instead of twising your wrist it saves you ,
Recommended Products
