Your cart is empty.
Your cart is empty.Product Description
BOSCH is the world-wide market leader for jig saw blades. This means uncompromising quality, innovative ideas and universal use. Whether for miter, straight or curved cuts, BOSCH sells the right saw blade designed for high performance in all major brand jigsaws.
From the Manufacturer
Bosch is the world-wide market leader for jig saw blades. This means uncompromising quality, innovative ideas and universal use. Whether for miter, straight or curved cuts, Bosch sells the right saw blade designed for high performance in all major brand jigsaws.
TC
Reviewed in the United States on November 11, 2024
I have used metal jigsaw blades in the past, but this one leads the way! I needed to make curved cuts in 3/16 aluminum, and it was approx 8” in length. I held off using a lubricant just to test the blade out and see how it would do. After the first cut, the aluminum ran and hid in the corner of my garage! It was fast, and cut through easily and with no need to even push the blade. After I wrestled the aluminum back to my work table, I was able to complete a 10” straight cut with just as much ease! I was skeptical it would meet my needs, but this blade exceeded it.
campbell
Reviewed in the United States on July 16, 2023
We cut a bunch of aluminum thresholds. Blade works great and last but you MUST use a lubricant!
Lloyd
Reviewed in the United States on December 6, 2023
I bought these blades out of desperation for cutting 1/4” thick aluminum sheet. Traditional metal blades were dying a quick death, 1 blade per 10” cut. Once I starting using this type of blade, I was able to use 1 blade for over 60” of cutting and still had good life remaining.
Kindle Customer 56
Reviewed in the United States on June 9, 2019
I cut aluminum miter bars and miter tracks with these blades. Worked great. Use a medium to slow speed and cutting fluid (be sure to use one that won’t discolor aluminum). If you do you get a pretty clean cut that needs just a little work to make perfectly smooth.
StillSilly
Reviewed in the United States on February 17, 2016
This blade did cut my aluminum diamond plate quickly as advertised. Just know, though, that you will still need to deburr the edge to make it safe. It's not a crazy rough cut, as you might imagine you would get with an 8 tooth per inch, but it's not smooth, either. In all, it was a much better choice than the 24, 30 and 32 tooth blades that I tested and compared. The 32 and 30 blades burned out quickly, after less than 2 feet of 1/8" diamond plate, though leaving a nice edge. I should have used a lubricant, but was completely out at the time. The 24 tooth lasted longer, but I still had to smooth out the edge. So in all, the 8 tooth cuts like a banshee, last a long time and I had to clean the edge anyhow. So overall, if you're cutting any large amount, it's your best option. Don't forget eye protection!
Lonnie Barnes
Reviewed in the United States on November 7, 2016
good product
Eaglezsoar
Reviewed in the United States on November 10, 2011
This blade works good for cutting aluminum as long as you take your time and don't try to force the tool.Lubrication should be used while cutting, I use kerosene applied as the cut is progressing.Clamp the material you are cutting and don't forget the eye protection.
Recommended Products
