Your cart is empty.
Your cart is empty. The BSA470 BRIS inflatable boat are made by 2000 Denier 1.2mm PVC fabric with aluminum floor board and marine plywood transom. It is a much more heavy-duty PVC fabric than 1100 Denier 0.9mm PVC boats. We also have added double layers of fabric at the bottom of the tubes. This allows 2.4mm of lower tube protection from sharp rocks and abrasive sands. This model is designed for daily pleasure or professional use. It is built strong enough to take max 35 hp engines, Special reinforced fabrics and a durable floor will handle you and all of your gear, year after year. Whether you choose to stay on-board or roll off the plliable sides with your dive tanks on, the BSA470 is ready for your next outing.
Specifications:
Overall length: 15.4ft
Inside length: 10.6ft
Overall width: 6.56ft
Inside width : 37inch
Tuber diameter: 19.7inch
Chambes: 5+1
Max person : 9 adults
Max capacity: 2094 lbs
Max hp: 40hp
Boat weight: 246 lbs
Floor Design: Aluminum floor
package included: inflatable boat, aluminum floor, three seats , one set of oar, foot pump ,carry bag and repair kits.
Philippines
Reviewed in the United States on January 30, 2025
Never owned an inflatable like this, have a house on beach in Philippines, thought this would be great, I was wrong, do not buy, absolutely terrible, great set up, lots of extras, but first time in water, everything came unglued, hooks, the board the engine sits on, the whole bottom, I was really, really disappointed, not sure if they had a recall on these or not, but I have not called there customer service yet, but if there was a recall, then I will try boat again, I did not even break motor in before boat fell apart!!
Pauline
Reviewed in Canada on September 23, 2024
I like that when you stood up in it no wobbling very sturdy awesome ride on the lake great quality awesome boat :).
Jose Blanco
Reviewed in the United States on August 23, 2024
Customer service is amazing!Boat is really heavy duty, keyword heavy!That being said, quality is top notch and boat does amazing in big/medium California lakes with Trolling motor and small 6hp outboard.Will definitely be doing business with seller in the near future.
Captain Ron
Reviewed in the United States on June 11, 2024
The media could not be loaded.
Marc Grenier
Reviewed in Canada on October 7, 2023
double épaisseur sous les tubes tres solide le meilleur bateau pour le prix
Mariela B.
Reviewed in Canada on April 24, 2023
EXCELLENT!Reviewed in Canada on April 18, 2023I never imagined that the boat would be of such good quality.I had some problems with the floor but the seller responded quickly and gave me an immediate solution, so I don't consider it a problem anymore.Customer service is 5 stars plus! Seller very kind, willing to help and find a solution and very, very, very professional. Never before I have found a seller that responds promptly and that solves any type of doubt or inconvenience.I highly recommended.
Marc-andre Leblanc
Reviewed in Canada on April 20, 2022
J’ai tellement hâte de le mettre à l’eauFacile à monté. Par contre je vous suggère pour ce modèle de vous procurez une trailer car il est lourd
Christopher
Reviewed in the United States on April 14, 2018
This boat is a lot bigger than the pics online show. Very roomy and tough. Just put transom wheels on it and I can't wait to hit the water in few weeks!
john chandler
Reviewed in the United States on July 15, 2016
This black sleek Bris, its more than i expected, 15' 4" looks bigger in person, nice aluminum floor & all the D rings, i am putting a 40hp short i think it will do fine, also putting a rubber gym mat on top of floor, will make for a quiet ride, great product.
Alaska Guy
Reviewed in the United States on May 16, 2016
I have held off reviewing this boat until I had a chance to use it. The Good: My first impression was that the boat is pretty good quality. There are lots of "D" rings to lash things to which is nice. The wrap-around rope is very nice. The boat is very stable and has won the approval of several local fishermen who know a great deal about boats. I was worried how the boat would handle a 185 lb engine, Fuel tank, and battery, plus a big guy in the back. It does very well. One wants a good bit of weight in the front when alone, and the D rings hold the milk crate that I fill with rocks, for that purpose. My wife and I were able to drag it back into the water, with engine and gear, several feet through the sand, after getting left high and dry by the tide. It's a good bush rig. The boat rides well and is stable, and handled well with 4 good size people.The Bad: The rear seat is too far back and interferes with the tiller handle on tight left turns, I just edge off the seat and then there's room. The seat can and sometimes does interfere with the tiller handle when I raise and lower the engine also. The middle seat/oar lock combination is better suited for rowing backwards than forwards. There just isn't any seat that's located correctly for rowing, in relationship to the oarlocks. It's doable in an emergency and I didn't get this boat to row it. The other main problem I have is that I have cavitation/aeration problems. I can't get the boat up on plane because at about 1/3 throttle or more, I lose propulsion and the engine revs, I have to slow back down. I haven't identified the problem yet, but I'd say it's getting the right motor setup for the boat, not a boat problem. There were only 2 reviews to read before I purchased the boat, one was good and the other was gibberish. Maybe I should only give it 4 stars but I'm just too darned happy with it. I'll update the review as I use it more, so far I have only 2 days experience with it in the Aleutians.Update: 3 years later I've had a chance to play with it more. I figured out the planing problem in Kodiak, it was a combination of too little air pressure and uneven loading. With my son in the middle we got it going a gps calculated 22 MPH with a 25 HP Yamaha 4 stroke. We probably could have gone faster but it was choppy and it was easy to oversteer, but it was great at almost full throttle. It also planes nearly level, where most metal boats raise up in the front. The coating on the plywood front portion of the floor is peeling and I need to do something about that, I did not do a good enough job keeping it dry when not boating.
Recommended Products
$969.00
$ 99 .00 $99.00
$1,349.00
$ 99 .00 $99.00