Your cart is empty.
Your cart is empty. BURRIS SIGNATURE RIMFIRE/AIRGUN MOUNTING RINGS:
Burris Signature Rings set the industry standard for quality. They have a reputation for
reliable performance in any weather or shooting circumstance. Proven design has stood the
test of time. Solid steel rings, ideal for hunting, are available for all types of optics and bases.
Pos-Align Inserts offer tremendous gripping power and durability and will not damage the
scope finish. Ring pair fits 3/8"" and 11 mm receivers.
- Revolutionary Pos-Align Inserts technology;
- Pos-Align Inserts guarantee perfect centering and maximum scope-to-ring contact for
tremendous gripping power without damaging the scope finish;
- Lets you virtually sight in your gun without moving the scope adjustments;
- Corrects misalignment caused by off-center receiver holes;
- Corrects for bases or rings being slightly off-center;
- No need for expensive tapered bases or shimming for thousand-yard shooting;
- Solid steel rings are ideal for hunting.
Comes with clamps for 11 mm and 3/8"" dovetails.
1"" rings come with ""0"" (zero) inserts.
BURRIS
Burris has built a reputation for some of the most solid, reliable rings, mounts, and bases on
the market. Our quality rings, mounts, and bases are vital to getting and staying on target,
round after round.
revcd
Reviewed in the United States on December 16, 2024
Prefect in every way
Carl
Reviewed in the United States on October 9, 2024
I first used the zero inserts, but it was way off with the laser. I the switch the rear with the .010 insert and it was within tolerance. I finish setting up the scope with the laser and dialed it in. I took it to the range today and shot my first 3 shot group, dialed crosshairs to center of group. Proceeded to next 3 shots dead on. Completed 25 rounds in a 1 inch circle at 50 yards.
Kater Karlo
Reviewed in the United States on November 12, 2023
The rings with the plastic inserts are good idea in principle, but the screws to tighten the cross bolts are really a stupid design. They are very wide slotted screws, no person will normaly have a bit at home that fits those. I had to order a special bit with a 10mm width to have something that fits. Then, when you try to tighten them, it is very easy to slip off and mar the screws or your rifle. It happended to me and it looks ugly now, as the blueing came off of the screws. Why on earth do they use slotted screws on these? Why not use normal torx screws like on the top screws?? Only Burris knows...
Clayton Macleod
Reviewed in Canada on September 8, 2021
I've had a few sets of these rings for different rifles. Not having to lap the rings because of the inserts they use is nice. This also avoids scope damage you might get with other rings if you don't lap them. Being able to roughly sight in the rifle with the angle adjustment inserts is another plus if you're worried about running out of adjustment on the scope. This is handy for those people shooting at longer ranges, especially.
Burrito the Night Wolf
Reviewed in the United States on October 10, 2021
Really good rings honestly. They hold up well too. I’ve installed and removed the same set on a few guns and no issues.
Davyand
Reviewed in Canada on October 3, 2018
Very good quality, functions as expected.
Alice
Reviewed in the United States on September 2, 2017
I bought these for a CZ 455 Lux in .22WMR and they went on easily. The bolt clears the scope and even with my iron sights in place it holds the scope in position to have good eye relief. The matte finish looks great with the blued CZ and the signature inserts hold the Burris Droptine scope perfectly. I'm going to get these again when I get my .22LR
George
Reviewed in the United States on March 6, 2016
Product was the correct item number as specified by both Burris and CZ to fit CZ 455 American with 11 mm dovetail. Two issues: 1) didn't fit grooved receiver (rings supplied measured 13mm, not 11mm); (2) package was clearly opened before with cracked plastic and old gun oil on packaging. I ended up with the BKL 1 Rings, 3/8 or 11mm Dovetail, single Strap, High, Matte Black at half the price. Thankfully, the exchange was handled by Amazon perfectly!
Andy
Reviewed in the United States on August 13, 2014
Advertized on the Burris website as "Rimfire & Airgun" rings. I have similar Burris rings on a Marlin .22lr and they work great, but the single screw did not have enough clamping power for a .22 Gamo Bone Collector. The pin stop did prevent the rear ring from sliding backward, but over time the clamp starting working its way off the dovetail at an angle. Such a disappointment because the self aligning plastic inserts make these really easy to set up.
Jonzzen
Reviewed in the United States on November 15, 2011
You cant go wrong with Burris Signature Z rings. They do a rock solid job of mounting your optics. The inserts are fantastic as they do not mar your scope as well you can add insert kits to add up to 20 MOA of scope alignment. Great for long range Rim-fire shooters. I have used these rings on both of my CZ 452fs's and the medium height is perfect. The matte finish matches my weaver optics beautifully. an added plus is the rim-fire rings can mount on 11mm or 3/8" dovetails covering American and European firearms.
Recommended Products
