Shopping Cart

Your cart is empty.

Your cart is empty.

Camco Eaz-Lift Camper/RV Tire Leveler | Features a Light-Weight Heavy-Duty Powder-Coated Steel Design & Embossed Tire Pads for Added Traction | for Single Axle Trailers (48845)

Free shipping on orders over $29.99

$89.99

$ 37 .99 $37.99

In Stock
  • Provides Easy Leveling: Allows easy leveling without blocks or ramps
  • Raises Trailer Axle: Raises an axle up to 8-inches when fully extended
  • Compatibility: Designed for light, single axle trailers only
  • Fits: Fits most 13-inch, 14-inch and 15-inch wheels with up to a 27. 1-inch tire diameter
  • Features: Tire pads that are embossed for added traction


The Eaz-Lift Light Weight RV Tire Leveler allows easy leveling without using blocks or ramps. It raises a trailer axle up to 8-inches when fully extended. The leveler fits most 13-inch, 14-inch and 15-inch wheels with up to a 27.1-inch tire diameter. Made out of durable, powder-coated steel with a corrosion-resistant finish, the leveler features tire pads that are embossed for added traction. Ratchet wrench included. Designed for light, single axle trailers only.


SpaceBooger
Reviewed in the United States on August 26, 2024
I hate trying to back my pop-up onto leveling bricks. This is so much easier and safer.
PugLover
Reviewed in the United States on August 23, 2024
Perfect. Tried it yesterday and it worked beautifully. The only negative I have is that the big screw that you twist to raise or lower was caked in grease. I’m sure a little is necessary but this was a lot. But still 5 stars because it’s great!
MackDaddy
Reviewed in the United States on November 25, 2024
Outstanding piece of kit for the camper! Worked awesome! My camper has 14in wheels. I could see issues with 15in wheels. Fit snugly on the 14s
EDS
Reviewed in Canada on July 21, 2023
I bought this tire leveler for use with our small tent trailer and it does a great job and allows me to get our tent trailer perfectly level. Our Tent Trailer has 12" tires and this fits very well making it easy to slide the leveler under the tire to get it into position. Because I was camping on very sandy soil, I pulled our tent trailer up on a coupld of 2x10s giving the jack a solid and stable foundation. The supplied ratchet wrench worked very well, and yes - you will need to spend a few minutes cranking it up but it is really no great effort. I had our tent trailer jacked up about 6" with this leveler, and the trailer was very solid and did not feel any different than it would with the wheels on the ground. This is a game changer for us and will always come with when we take the tent trailer out.
sparky30084
Reviewed in the United States on December 19, 2023
I didn’t mark it down because it states in the description “some 15” off road” so I tried. I have a 2023 Aliner 12’ Classic for context. I found another one on Amazon that is about an inch or two wider. You could use it but you would have to use that sides front and back stabilizers to lift it a little to slide this in. Quality for a smaller single axle trailer I think is very good and will work wel and last a very long time. It says to purchase a tube of grease for the screw threads but the one I got came greased up. You should have a tube on hand for when that wears off though. I knocked off one star because they don’t give you any kind of protective cover so the greased up screw is out in the open when you store it. I will make a tote to go around it for storage. Also it will keep the included wrench with it so I don’t lose it.
Ryan
Reviewed in Canada on July 21, 2022
I had just finished booking my summer camping trip in February when I ordered this device. My dreams of a perfectly level camper danced in my head. When it arrived, it looked good and I kept it around the garage a few days to check it out, excited for my July camping trip to Algonquin in Ontario. Fast forward to May, opening the camper in the driveway after pulling it out of storage. First thing I tried was the lift. I have a 14inch wheel on my fleetwood Niagara. (Within the spec for this lift). Getting it in around the two sides of the tire… almost impossible. I thought ok, maybe the driveway has a slight depression, that’s the reason. Using a number of tools to influence the steel tire holders around the tire finally resulted in getting it in place, but an easy task… it was not. Fast forward to our camping trip, happy leaving the yellow blocks at home, we ventured out. After arriving at the site, and positioning the camper, I started to set the lift at te campsite. Again, pushing a giant rock uphill for a mile would have been easier! Resulting to rubbing olive oil on the metal, numerous sandal based foot kicks on each side gained half entry of the lift around the tire. So, in the rain -and humidity, that was going to be enough. I started lifting. Since the tire plates were only on half way, the lifting range was reduced by half, and the plates were digging into the edge of the tire. At max height, the trailer was still not level. The dream of a level trailer went up in smoke. By day two, I had had enough, and pulled out the car jack, lifted the trailer, and moved the ez-lift into place. I then placed wood blocks under the lift and lowered the trailer back down. All was good and a level trailer…finally. Then it was time to leave…. Problem… since the lift was now on blocks, it would never come off the lift plates. You also can’t risk driving off of it, as the metal edge could cut/pop/bend and get caught in the wheel well of the trailer. So more effort to raise the trailer higher than before, insert a flat block of wood below the wheel, then lower the lift and let the tire sit on the wood. Ok, easy right? No.. to remove the oil soaked ez-lift plates, requires hooking up a ratchet strap hook to the inside tub, then pulling with force of an elephant… ok not quite, but a good body jolt, then moving to the other side, inflicting a second body wrenching tug at the other side. After four of these, the clouds parted and out came the ‘ezlift’. Oh, now slightly distorted as well. Thanks for reading… maybe keep this for 2000lbs trailers with small wheels.
luiz,J.
Reviewed in Canada on January 31, 2022
Use it for level my tent trailer, it’s cheapest option and it’s easy to tuck it away
Christine divers
Reviewed in the United States on June 29, 2021
After using old wooden blocks to level our camper with the back and forth method, we decided to try something that could eliminate a little maneuvering. This baby sure does the trick for our pop up. We find a spot we like, park and level, no more pulling forward and backward to get the right amount of blocks under the tire. The lifted tire has been good and sturdy and we feel quite secure.
JohnnyP
Reviewed in the United States on June 10, 2021
The short length of the supplied ratchet makes for very difficult wrenching of the screw jack. So much so that I hurt my shoulder when the lifting got tough, which is about halfway through the run of the screw (on a 3,000lb trailer) and it's never been "EAZ". The ratchet construction seems a little flimsy and makes me think it might fail when I putting my all into it which would probably cause some injury. I bought this thinking my wife could use it by herself so she wouldn't have to move the trailer back and forth to put it on leveling blocks, but there is no way she's strong enough to operate the ratchet to jack the trailer all the way up, if need be. Like I said, it's anything but "EAZ". So scratch that idea.It's supposed to raise the trailer 8", which seems like a lot (about five 2X4s or two 4X4s), but if it sinks into the surface on which you've parked you'll lose some of that 8"; which is pretty easy because the tubular base doesn't have much surface area upon which to rest. The very first night I used the leveler we were stuck with a campsite which had a very limited parking option with a slight slope so the leveler wouldn't raise the trailer enough to get it completely level. Using it one time I realized it was actually bent. There is no weight limit in the description, but I obviously surpassed whatever it is; 3,000 lb trailer, so one wheel was less than 1,500 lbs since 300 lbs is on the tongue.After having used it for about 10 times I've given up on it. It's awkward to store; it's heavy, the screw jack flops back and forth, and it doesn't lie flat. I switched to the curved leveling blocks and do it old-school now. Much easier.
Rick B
Reviewed in the United States on April 8, 2021
As I write this, the curb side wheel of my popup is two inches off the ground thanks to this awesome leveler!! I will say it would be nice if it came with some kind of heavy duty bag to store it in, but whatever. It works perfectly, and really simplifies the whole process of side-to-side leveling. No more back and forth with pieces of wood or giant Legos... just put it in place, crank it up, and you’re done!
MadCityJack
Reviewed in the United States on April 6, 2021
I intended to buy the BAL leveler on Amazon but it was out of stock. So, I purchased this EAZ "knock off" of the BAL. In my driveway, I set up the EAZ tire leveler on my TAB 320. It lifted the tire and side of the trailer easily. I intend to spray the screw with silicon and likely buy a bag to store it in while traveling.Update 5/25/21: I now have camping experience with the EAZ tire leveler and it worked great. It rained quite a bit during out time camping, softening the ground around the tire. Before trying to remove the EAZ, I slipped in a plastic stabilizer pad under the tire so when it was lowered, the tire afforded a bit more room to slide out the EAZ. Still looking for a storage bag.
Recommended Products

$299.98

$ 99 .00 $99.00

4.6
Select Option

$189.00

$ 80 .99 $80.99

4.8
Select Option