Your cart is empty.
Your cart is empty.Product Description
Fastener Free Deck Surface with CAMO MARKSMAN System
The MARKSMAN system makes it easy to fasten CAMO Edge hidden deck screws. Simply set the tool, drop your deck screws in each fastener slot, and drive.
- Use with Narrow Board decking. Fits any 3-1/4 in. (83mm) to 5 in. (127mm) deck board.
- Jig that allows fasteners to be installed on the edge of the board, for a fastener-free deck top
- Automatic 3/16" spacing is ideal for composite, cedar, hardwood, PVC, pressure-treated or synthetic boards
- Edge deck screws reduce splitting, cracking, and maintenance for a barefoot approved deck top
- No-slip grip action holds the tool securely to the deck board while fastening
- Dual screw guides fasten both sides of the deck board with single tool placement
- For best results, predrill hardwood and capped composite deck boards
- Driver bits are included in each pail of CAMO Edge hidden deck screws
3 Easy Steps for a Fastener-Free Deck Surface
Step 1: Set The Tool
Simply position the tool over a joist and clamp the Marksman to treated deck board. The clamp automatically creates spacing for the ideal gap (based on the tool chosen, see below).
Step 2: Drop In Screws
Load 2 CAMO Edge Deck Screws into the built-in guides. These screws feature a rake tip to auger out material and prevent splitting.
Step 3: Drive Screws
Attach the included driver bit to your drill and drive both screws. Don't worry about overdriving as the built-in shoulder will stop at the perfect depth automatically.
The Marksman System
PRO-X1
For use with Treated Lumber deck boards. Provides a 1/16" gap. Fits any 5-1/4 in. (133mm) to 5-3/4 in. (146mm) deck board.
PRO
For use with Composite decking. Provides a 3/16" gap. Fits any 5-1/4 in. (133mm) to 5-3/4 in. (146mm) deck board.
PRO-NB
For use with Narrow Board hardwood, composite, PVC, cedar and treated lumber deck boards. Fits any 3-1/4 in. (83mm) to 5 in. (127mm) deck board. Provides 3/16 in. (5mm) spacing
EDGE
Use for No Gap installations. Designed for use with pressure-treated and other softwood lumber. Attaches to any drill.
CLIPS
Simple, Strong, Hidden. CAMO hidden deck clips are the best way to install grooved decking. Designed and warranted for use with all leading grooved decking.
LEVER
Build a better deck by yourself with LEVER, the one-turn tool that locks-in rows of boards and clips and straightens warped boards.
ClipDRIVE
Smarter, Faster, Easier. Fasten CAMO universal deck clips up to 5x faster all while standing and saving your back.
Client d'
Reviewed in France on September 18, 2024
Fonctionne bien
Jeff Scott
Reviewed in the United States on July 29, 2024
This is an amazing tool. I've done decks with the traditional hidden faster systems, Trex, Timbertech, etc., and this method is twice as fast as using those systems. I won't use those others anymore!
Troy M.
Reviewed in the United States on October 6, 2024
Great tool easy to use !!!!
Oblique Raven
Reviewed in Germany on July 5, 2023
A really great tool but be careful as it requires specially narrow screws that can be ordered from CAMO also and are cheaper than comparative ones from Spax etc.Its really easy to use and laboursaving
Strelka 0160
Reviewed in Germany on August 3, 2021
Sehr gut
Mike K.
Reviewed in the United States on July 9, 2021
If you want to install exterior decking WITHOUT running fasteners through the face where they'll collect water, splinter and make it look unprofessional, then this is a MUST HAVE tool!! Don't forget to buy the special drill bits needed when installing Ipe, Mahogany, Meranti, (any) Hardwood decking. You'll thank me later!! With this tool, you can also install typical pressure treated decking, composite decking, etc, though pre-drilling is not really necessary since these materials have a softer composition. You'll also need to buy the specific Camo screws to use this tool, but the results are FANTASTIC!! I've never had a dissatisfied client!!!
Calvin Goodrich
Reviewed in the United States on May 12, 2021
This product exceeded my expectations in ease of use. It's thoughtful design sped up my solo refinish installation. I spent more time laying out each row and fasteners than I did drilling and fastening the boards. Purchased the lever and screws and extra bits along with this tool, highly recommend the system.
S. Mitchell
Reviewed in Canada on October 9, 2021
Love it! Plus very easy to use.
K.
Reviewed in the United States on October 23, 2021
Note that there are different tools for different types of deck boards. One Camo tool designed for cedar decking will not work on composite decking. Be sure to verify what you are using it on and that it is the correct tool for that product. I made that mistake. Had to return for the right one. Otherwise, works as advertised. Just expensive screws.
Miss S L Yates
Reviewed in the United Kingdom on November 1, 2020
Fantastic gadget making our life so much easier. I would say buy the Camo screws too expensive but worth it.
Bill Mansfield
Reviewed in the United States on May 5, 2019
My fault this doesn’t get a highest rating. I was psyched about this tool when I saw it on a deck building YouTube video. I still am but what I did not understand was that there were different size tools for different width deck boards. If I hadn’t been under a tight deadline I would have exchanged it for the larger size that fit my deck boards to finish the project. I still think it’s a great tool.
GMisenar
Reviewed in the United States on June 4, 2018
This really makes the deck look good! I used it to install cedar 2x4 on the deck and it worked very well. I didn't need to pre-drill the boards and it did a decent job of pulling down slightly warped boards (I discarded boards with big wow's). It's very sturdy and I was able to use it to position most boards all by itself, while using a couple of flat bars for fine-tuning spaces (3/16") or holding down boards until the screws were installed.One note to include, it takes a lot longer to use this than just putting screws down through the top of the boards, but the clean look, without splinters or tops of screws showing is definitely worth it.I can't emphasize how sturdy it is - I installed 1,400sf of decking, including steps and a rim board - and it still looks almost brand new. Plus, while I purchased the bulk screws with the fastener, when I needed a few extras I just went to Home Depot and got a small box (they cost a little more than online, but no waiting for postage).
Randy K
Reviewed in the United States on December 18, 2018
I saw this deck fastening system while watching a video online. I decided to try the system because there are no surface blemishes when the deck is completed. This tool did everything it advertised and I was very happy with it. My only complaint was that a different tool was needed for 2x4's and 2x6's. If you are using both dimensions of lumber on the deck surface, you'll need two different tools. It does take a lot longer to install the deck surface, but the finished product looks great. It will be interesting to see if fasteners stand the test of time.
Recommended Products
$159.99
$ 66 .99 $66.99
$65.66
$ 29 .99 $29.99