Your cart is empty.
Your cart is empty.RETUXEP Camouflage+Black Forged Carbon Fiber 3D Printer K1 K1C Sheet 235x235m,Smooth Spring Steel Build Plate (no Base) for Creality K1/K1C/Neo/Ender 5 S1/Ender 3 S1 Pro/Ender 3 S1/Ender V3 KE/SE
Zack Russell
Reviewed in the United States on February 3, 2025
2 models later and nothing sticks to it anymore. It did the first two models then it don't even stick with a line now
AseAware
Reviewed in the United States on January 5, 2025
Love the style it makes on the prints. Adds an a great look to them.
David Forman
Reviewed in the United States on August 11, 2024
Petg sticks too good. I didn't think that was possible, but apparently parts of the print adhered better than the coating adhered to the steel plate. My suggestion would be to try and remover the print very slowly and carefully. In some places I was able to restick the coating down for the next print. As you can see in the picture, there's a couple of spots where the coating is gone. This was after about 4 very large prints. Bed temp 70degs C.
John Hu
Reviewed in the United States on July 4, 2024
This is the perfect replacement for my ender 3 ke. It's works exactly as the OEM plate that came with my 3d printer. Prints stick to the surface without have to use hair spray or glue stick. Prints are also super easy top remove. If left on the printer and cooled print slides off like butter.
Martin J Baudino
Reviewed in the United States on July 27, 2024
Works great. Well packaged
Denise
Reviewed in the United States on October 4, 2024
I grabbed this because I ruined the original. I'm sure it was still usable, but in trying to make some adjustments, I made something a little too loose on my z-axis and caused the nozzle to absolutely dig into the original plate permanently affixing a chunk of it with the pink filament I was trying to use. A lot of it flaked off, but what I didn't want in future prints was either the shape that dug into the plate imbedded on the bottom of future projects or the pink to slowly come loose and adhere to future prints. I'm sure that this wouldn't bother others (I've seen some OG Ender 3 build plates, and some of them have been absolutely FILTHY), but I'm not one of those people. As such, I needed a new build plate.This plate is awesome and works great. The primary reason I went with this plate over other listings was because it affords me one more mistake like the one above and I will still have a functional plate on the other side. Reasonably priced and works great...especially now that I've figured out how to print successfully with my latest 3d printer (an Ender 3 V3 KE).
Jake
Reviewed in the United States on April 22, 2024
I would recommend this build plate to any seasoned maker. I would recommend that you be patient with honing in / calibrating your different materials for this. I have adjusted my printer bed to 65⁰C for my Creality PLA and Creality Hyper PLA. So far I've been able to print at pretty high speeds though without any loss of quality or layer adhesion. I give my plate a quick clean with 90% IPA and a microfiber cloth after every print. I'm about 20 prints in and I haven't had any issues. Prints come off smooth and glossy with a cool holographic looking pattern on them.
Peter W
Reviewed in the United States on April 15, 2024
The surface of this 3D printer build plate is truly remarkable, offering a glass-like smoothness to my prints and showcasing a mesmerizing holographic design that transfers seamlessly onto the print. Using PLA at 200 degrees with the build plate heated to 60 degrees, the prints adhere flawlessly with no lifts and perfect adhesion on the initial layer. Each side features a unique design; one with beams and the other with a hex rainbow pattern. It's worth noting that there's a protective film on both sides, which must be removed before printing on either side. Additionally, it's crucial to wait for the build plate to cool down to room temperature before removing the finished print to avoid damaging the surface.The surface does retain a shadow impression from the first print, and subsequent prints have a tiny impression from the first print, that being said it still is the most versatile and my now goto surface for 3D printing as the H1H material acts like glue to PLA filament and the model that is printed on top of it never lifts while printing. You will have to set the nozzle Z axis offset a bit as to not damage the build plate from any kind of scratching from the nozzle to keep the surface glass like. Even on matte filaments, it still makes the surface gloss and glass like all while transferring the hologram pattern.
Recommended Products
