Your cart is empty.
Your cart is empty.Product Description
Fit Engine
fit Land Rover Jaguar V6 3.0L; fit Land Rover Jaguar V8 5.0L;
Application:
X150 - XK (10MY);
X250 - XF (10MY);
X351 - XJ (10MY)
Replace OEM
303-1445;
303-1447;
303-1448;
303-1452;
303-1482;
Camshaft Alignment Tool
OEM Equivalent Part Number: 303-1445
Tensioner Timing Tool
OEM Equivalent Part Number: 303-1482
Camshaft Lock Tool
OEM Equivalent Part Number: 303-1448
Use to correct engine timing position on Jaguar Land Rover 5.0L V8, and 3.0L V6.
Injector Tool
Injector tool fit Jaguar Land Rover 5.0L V8, and 3.0L V6 engine,
Designed to remove injector.
Fuel Pump Tool
Fuel pump tool fit aguar Land Rover 5.0L V8, and 3.0L V6 engine, specially designed to set high pressure fuel pump when dismantled the engine.
Flywheel Locking Tool
OEM Equivalent Part Number: 303-1482
Camshaft Timing Tool
OEM Equivalent Part Number: 303-1447
Camshaft Lock Tool
Camshaft Timing Tool
Package Include:
2 x Camshaft alignment tool, replace 303-1445; 1 x Timing tool, replace 303-1447; 1 x Camshaft lock tool, replace 303-1448; 1 x Camshaft rotation tool, replace 303-1452; 1 x Tensioner tool, replace 303-1482; 1 x 3.0 flywheel lock tool; 1 x 5.0 flywheel lock tool; 1 x 3.0 crank pin tool; 1 x 5.0 crank pin tool; 1 x 3.0 5.0 dual purpose fuel pump tool; 1 x fuel injector remove tool.
Demonk9-801
Reviewed in the United States on February 9, 2025
Good to go
Ben Sangtrash
Reviewed in the United States on February 18, 2025
Have a customer with FIVE land rovers. One of which was rattling quite badly. I've been telling him it needs a timing chain for three years. He finally decided to do it. This tool did its job.
Andrew Rowell
Reviewed in the United Kingdom on January 6, 2025
This worked perfectly for rebuilding an f type 3.0 v6. Make sure the cam lobe is facing the right way or you won't be able to get the timing to align.
Cedric
Reviewed in France on October 1, 2024
J'ai acheté cet outil pour remonter un V6 Jaguar, il y a pas mal de points à améliorer:- l'outil de réglage de pompe à carburant ne s'insère pas correctement (ni côté v8, ni côté v6) - il ne permet pas de positionner la chaine de pompe selon la procédure constructeur lorsque le volant est bloqué au TDC(de toute façon il n'y a pas besoin d'outil pour régler cet arbre si on a une chaine avec des maillons colorés)- l'outil de blocage des dents du volant moteur ne peut pas s'installer de manière perpendiculaire aux dents, quel que soit le sens dans lequel on positionne le support acier. Il peut s'installer mais "en diagonale"- les outils de verrouillage des arbres à came sont imprécis, les plaques de verrouillage se mettent de travers et laissent un peu de jeu dans les arbres (plaques pas assez épaisses et filetage trop grossier)- il manque des vis pour tenir l'outil de réglage des arbres à came, car les vis qui tiennent normalement les actionneurs VVT sont trop longues et trop larges, on ne peut plus insérer de rallonge de clé si on utilise ces vis.Donc c'est globalement utile, mais manque de précision.
hussein asj
Reviewed in Canada on August 4, 2023
Fast delivery
David
Reviewed in the United States on July 23, 2023
I used it and it fits . Only problem I had for my 2012 LR4 is the back corner on driver side I had to improvise using my own bolt . But it worked with no engine damage and no check engine light . You can use this tool over again . Does not seem to be a one time use if you handle it properly .
Mec. Noman
Reviewed in the United States on June 3, 2023
Camshaft locker didn’t quite work on the left head. When put on the cams we’re still out of position. Worked great on the right head. The crankshaft alignment tool is crudely made for the 3.0 engine and mines had defects in the casting. Luckily I made alignment marks before disassembly It was casted and not machines like the 5.0 crankshaft alignment tool. The gear rotating tool might be a little on the large side since I could only use to to rotate the left exhaust cam. It wouldn’t fit on any of the others. I give it 2 stars because it’s twice the price as the 5.0 only tool kit and only half the quality.
ANGEL L. CLEMENTE
Reviewed in the United States on March 27, 2022
Okay
Micah
Reviewed in the United States on April 30, 2021
Excellent kit, I work for a JLR dealer and I wanted a kit for myself so I didn’t have to keep tracking them down. Good quality for the price. It does well
Customer
Reviewed in the United States on December 7, 2019
Good tool got the job done. Had bought a similar kit before but need the new crankshaft lock timing tool worked great
Mohamad
Reviewed in the United States on December 28, 2019
Everything you need to do the job right the first time
Recommended Products