Your cart is empty.
Your cart is empty.Product Description
Easy Mixing and Use - Perfect For Beginners and Top Craft Professionals
Easy Mixing at 1:1 Ratio
- High Gloss Finish
- Easy Mixing
- Low VOC - Low Odor
- NON Toxic
Perfect for Jewelry and Crafts
- Excellent for Bracelets
- Large Pieces
- Excellent Casting Resin
- Coasters & Trays
Let Your Imagination Run Wild
- Easily Add Pigments
- Make Beautiful Art
- Excellent for Orgonites
- Perfect For Bangle Bracelets
Quality Products Made in The USA
- Self Leveling
- Versatile Use - Many Applications
- Better Formula - Stays Clear Longer
High Quality Epoxy Resin Made In The USA
Advantages:
- 1 to 1 mix ratio (By Volume)
- Fast Cure (24 hours)
- Low Viscosity at 600-800cps
- Work Time of 45 minutes (150 grams)
- Excellent Clarity
- Excellent Moisture Resistant
- Cures Hard With a High Gloss Finish
Designed for Professional Crafters and Artists
Clearcast 7000 is an amazing epoxy resin for casting jewelry and large pieces. Let your imagination run wild with endless amounts of projects.
This epoxy resin is formulated to have a low odor, (LOW VOC's), NON Toxic, & NON Flammable. Easy to mix and use at (1-1) ratio by volume.
Made in The USA with quality and pride.
dapotato477
Reviewed in the United States on January 10, 2025
Use part A and B equally and they will turn out really well usually if you don't mix the parts well enough it will turn into a goopy mess doesn't Harden very quickly
Butch
Reviewed in the United States on February 13, 2024
Looong work time. Flows well, like water almost.. like thin syrup. Sets hard and mixes with colors well.
Nancy Keeney
Reviewed in the United States on November 10, 2024
I heard online that this resident was a really really good resin, but I found out it does turn yellow so I wouldn’t recommend it
Sandy R
Reviewed in the United States on July 7, 2023
When it was clear, it was invisible clear. Quickly. It didn't need more than 45sec stirring at most, with few bubbles. If left sit for a couple min, any bubbles would disperse on their own.There were times when it wasn't so clear. Most of those times it was because my tools hadn't been properly cleaned btwn pours. But there were a small # of times when there was no reason for the cloudiness."Play time" was adequate. About 15min before it began getting warm if left unattended.After accumulating too many A bottles, I figured out I could get away with using 3g less of B than A with pours btwn 15-40g. So if I poured 20g of A, I'd only add 17g of B, then mix. This helped avoid running out B & having a dozen/+ A bottles with an oz/+. It added time for curing, but was otherwise just fine/unnoticeable.I did notice that after about a month, B began turning yellow in the bottle. Doesn't bode well for long term on clear projects. Something to keep aware of if you do clear.Lastly, ALWAYS use a mold release agent when using ANY brand of resin. Ppl tend to blame the resin or the mold. The problem is the user not using the mold release.Imagine baking a cake without greasing the cake pan 1st. Instead of your cake being torn apart, the pan is stuck to the cake instead. Same thing with resin. The mold MUST be prepared too. Common sense.Otherwise, it's resin. 🤷♀️ No magic tricks to report.
Alissa Green
Reviewed in the United States on February 5, 2023
I have purchased this resin a few times now. After using it the 1st time I decided I wouldn't use anything else. It works for everything I make! From small things like keychains & earrings to large trays & jars. It even works great for my tumblers!Every time I order its delivered 3-4 days earlier than expected which is very helpful to get customers orders out quickly.
Melissa M.
Reviewed in the United States on April 24, 2023
This resin is an amazing product and also a great price point. It is easy to use and has little to no smell which is awesome. I will continue to buy this for all of my future resin projects.
michael crump
Reviewed in the United States on June 3, 2022
Yes there were some tiny micro bubbles. Only visible as I was making Off Road Lights for my truck. This Resin encapsulates the Powerfull Leds on the front to make it "Solid & WaterProof". Only visible as the super bright light shined through the 1/4 inch thick layer of resin. However it "Diffused" the light very successfully the way intended. They sanded and polished perfectly smooth. Looks "Super Nice". Only question is will it Yellow over time. If it would, it would be a match for Halogen head lights but my truck is all Leds. For now it's a 99.9% positive outcome. Hardened fast, thicker part B, Less running and mess. Recommend.
Sakatah
Reviewed in the United States on September 12, 2021
Ok. The reason I bought this resin in June 2021 was to replace a more expensive resin that was utter crap - too many bubbles and it yellowed.This product was cheap and had some decent reviews.Today - Sept. 12, 2021, I decided to use it to make some resin pieces. I carefully measured out equal parts and started to gingerly mix the resin."Screw it" I thought. Let's put this resin to the test.......so I whipped the resin together like a mad woman trying to introduce as many air bubbles as I could.Know what? There weren't that many bubbles. The bubbles that were in the resin easily popped.I didn't have to set my silicone molds on fire to pop bubbles. The consistency was like a heavy water, poured easily, took a ton of inclusions - rocks, sand, dried flowers, colorants, without a problem AND no yellowing.I have done died and gone to resin heaven.Definitely will be buying more of this. Scratch that. Tons of it. As much as I can possibly get. I'm going to hoard it and not share with anyone.Set up nicely - clear and hard.
Recommended Products
$32.99
$ 14 .99 $14.99