Your cart is empty.
Your cart is empty.Product Description
FIT FOR THE FOLLOWING VEHICLES:
- 1991-1997 for Jeep Cherokee
- 1991-1992 for Jeep Comanche
- 1993-1997 for Jeep Grand Cherokee
- 1997 for Jeep TJ
- 1991-1995 1997 for Jeep Wrangler
- 1997 for Land Rover Defender 90
- 1996-1999 for Land Rover Discovery
- 1995-2002 for Land Rover Range Rover
INSTALLATION：
- First cool the car for 20 minutes, Unplug the wiring harness from the IAC valve.
- Depress the tab and pull the harness away from the valve to unplug it.
- Remove the two bolts securing the IAC valve in place and remove vertically upward
SPECIFICATIONS:
OEM Part Number:2H1142, AC151, AC320, 21774, 4626052, 4798377, 4637071, 53007562, 217207
Condition: New
Package Include:1 x IDLE AIR CONTROL VALVE
helen
Reviewed in the United States on July 30, 2024
The sensor fit perfectly in my jeep . And it no longer stalls . It was definitely worth the price, it was easy to replace even someone without any car knowledge could do it . And the part was good quality
Tim Michael
Reviewed in Mexico on June 13, 2024
De vez en cuando si funciona y hay ocasiones que no funciona.
ML O.
Reviewed in the United States on May 16, 2024
Worked for my 1998 Land Rover Discovery 1. Fixed the issue with it overheating.
Bayutas
Reviewed in the United States on October 19, 2024
Will update if other ones will work
Daniel Hatstat
Reviewed in the United States on June 11, 2023
First it doesnt come with screws. Next the oring isnt the right size at all. With that being said it looked the same as my old one so i slapped it into my 97 jeep grand cherokee. A couple months later it started idling poorly again so i took it out and measured the sensor. It is almost 1/4 inch longer than the oem one. How it worked at all amazes me. Cleaned up the old one and now jeeps running smoother again. In the future ill buy a more expensive one i know will fit my jeep. Mopar or no car
Don & Diane
Reviewed in the United States on May 7, 2023
Nice product. I gave it 4 stars as the O ring doesn't fit. Better save the old one, I you can.
Tb Clowns
Reviewed in the United States on August 22, 2022
Well packaged product in new condition. (FYI-Did not receive screws w/ package- use existing. Gasket was included.)
Scott Allen
Reviewed in the United States on March 10, 2020
I bought this to replace the one on my 97 Land Rover Discovery. It is a perfect fit, and comes with an O-ring, which is not applicable to this vehicle. I purchased a gasket set for $12, which will work for this vehicle:STEPPER MOTOR GASKET SET x2 DEF DISCO RANGE ERR3359 ALLMakes4x4.Just a note: Keep the original screws and reuse them if you can. The screws that come with the motor were oversized on mine.You may have to set the adjustment on the new motor once installed: Depress the accelerator partially and start the engine, and let it run with the pedal depressed for 5 seconds, and shut off. Restart the engine. This procedure should set the stepper motor to the proper position. It worked well for me. All the best!
Jose
Reviewed in the United States on December 30, 2020
Affordable and worked! Keep the original screws and gasket because the provided will not fit. It fixed mi idle issues in my 1997 Disco! Quite a difference from $300 at the dealer to around 15 bucks here! Very pleased with this purchase!
Recommended Products