Enjoy free shipping on orders over $29.99

US Dollar

0 $0.00

Your cart is empty.

Cerakote FX™ Cosmic (4g) FX-102A - Metallic Powder additive for CERAKOTE® H-Series and C-Series Clear Ceramic coatings; Taking Customization to Another Level.

5.0 Write Review

Free shipping on orders over $29.99

$19.95

$ 9 .99 $9.99

In Stock

Qty.:

Cerakote FX Cosmic is the perfect silvery white pearl. (S panel image is Cosmic over Graphite Black.),Cerakote FX is a metallic powder additive that is specifically designed and tested to be mixed with our H-Series Clears, and MC-Series Clears, then sprayed over a Cerakote solid tone base coat
This creates a new sheen and look that is anywhere from mild to wild, depending on the combination used

Product Description

TAKING CUSTOMIZATION TO THE NEXT LEVEL

Endless Possibilities........

Color Shifting Effect

Can be applied over any Cerakote base color.
Graphite Black is recommended and shown in examples as base coat.
Simply add FX metallic powder to Cerakote Clear and spray as a top coat.
See application guide for full directions. APPLYING A PROPER BASE COAT AND FOLLOWING EACH STEP OF THE APPLICATION GUIDE IS CRUCIAL

FX Kits include everything needed to get started!

H-Series Starter Kit (OVEN CURE)

1 - HVLP Spray Gun
1 - 4oz tester Graphite Black (base coat) / includes part B catalyst
1 - 4oz tester H-Series Clear ( gloss or matte) / includes catalyst
1 - 4g bottle of FX metallic powder (your color choice)
1 - metal mesh strainer
1 - 50ml glass cylinder

C-Series FX Starter Kit (AIR CURE)

1 - HVLP Spray Gun
1 - 4oz tester Graphite Black (base coat)
1 - 4oz tester H-Series Clear ( gloss or matte)
1 - 4g bottle of FX metallic powder (your color choice)
1 - metal mesh strainer
1 - 50ml glass cylinder

CHOOSE A COLOR TO BEGIN ......

BLAZE / FX-101

Cerakote FX Blaze is a deep ruby-red pearl, over Graphite Black.

COSMIC / FX-102

Cerakote FX Cosmic is the perfect silvery white pearl over Graphite Black.

LIBERTY / FX-104

Cerakote FX Liberty is a sparkling sea blue pearl over Graphite Black.

RANGER / FX-106

Cerakote FX Ranger is a brilliant gold pearl that color shifts to a warm green over Graphite Black.

MYSTIQUE / FX-105

Cerakote FX Mystique is a strong color shifting pearl that travels from a deep indigo-violet to a lighter rosy pink over Graphite Black.

RIOT / FX-107

Cerakote FX Riot is a sparkling red pearl that color shifts from a warm fiery red to a cool rosy red over Graphite Black.

TYPJHOON / FX-109

Cerakote FX Typhoon is an aqua blue-green color shifting pearl over Graphite Black.

ANTHRACITE / FX-112

Cerakote FX Anthracite is a heavy metallic black and silver over Graphite Black.

GOLD / FX-113

Cerakote FX Gold is a rich gold metallic over Graphite Black.

SILVER / FX-114

Cerakote FX Silver is a warm champagne silver metallic over Graphite Black.

COPPER / FX-115

Cerakote FX Copper is rich copper metallic over Graphite Black.

APPLICATION STEPS - please see complete Application Guide at Cerakote.com

STEP 1 - Apply Base Coat	Apply a solid-tone basecoat (non-metallic) at the recommended mil thickness (refer to the TDS) it is important not to cure, flash-cure, or allow the coating to become tackfree. (H-series) Parts will NOT be placed into an oven until after Cerakote FX has been applied.
STEP 2 - Ambiently flash	(H-series) Ambiently your parts with an H-Series basecoat for a minimum of 15 minutes or until solvents have fully evaporated. (C-series) Ambiently flash your parts with a minimum of 5-10 minutes or until solvents have fully evaporated..
STEP 3 - Add FX to Clear	Add full contents of one Cerakote FX container to one full 4 oz. bottle of (H-Series) Clear (H-300 or H-301) OR (C-Series) Clear (MC-160 or MC-161)
STEP 4 - Agitate	Agitate bottle for 1 minute until Cerakote FX & H-Series clear or C-Series clear are thoroughly mixed.
STEP 5 - STEP 7 - (H-series)	Pour the desired quantity into a glass graduated cylinder or beaker. Mix by weight in Cerakote.com mixing calculator. Then select catalyst ratio and add to cylinder according to weight calculator. Use a powder free glove Use a powder-free latex or nitrile glove to tightly seal the graduated cylinder or beaker. Agitate the bottle for 1 minute until thoroughly mixed.
> > > > >	C-series - Skip to Step 8, no catalyst is needed!
STEP 8 - Strain	Strain through a 100-mesh strainer (149-micron) into a high-quality spray gun, such as an Iwata LPH-80.
STEP 9 - Adjust air pressure	Adjust air pressure settings to 25-30 PSI and adjust your fan to a 2-3 inch oval fan pattern
STEP 10 - Spray	Spray from a distance of 3-5 inches and apply 2-3 light coats of Cerakote FX to achieve best visual results. Applying Cerakote FX to a H-series or C-Series base coat will add an additional 0.25 – 0.50 mil to the overall finish.
STEP 11 - H-series / Cure	After Cerakote FX has been applied, allow parts to ambiently flash for a minimum of 15 minutes or until solvents have fully evaporated. Then, fully cure at 250° Fahrenheit (121° Celsius)
Step 11 - C-series / Cure	Allow coated parts to air dry, they will be tack-free approximately 45-60 minutes following the application. Until this point, the coating is still wet, so take care not to bump or touch the parts. The coating will be partially cured after 24 hours and fully cured 5 days after the application

Shopping Cart