Your cart is empty.
Your cart is empty.Chrysler Quality Assured, Genuine Chrysler Parts OEM Only, Not After Market
Leo Allen
Reviewed in the United States on January 5, 2025
I experienced rough idle and loud acceleration with low power. Engine light was on. Checked the code and originally ordered replacements from AutoZone (Duralast). These worked for maybe a week and the problem returned. I immediately sought out Mopar parts and ordered these. They fit perfectly and solved the issue once and for all. Lesson learned - when dealing with things like sensors, always get the Mopar replacements.These arrived quickly, are well priced, and as I mentioned they solved my engine issue once and for all.
Vic
Reviewed in Canada on August 18, 2024
OEM part. Fixed 2015 Wrangler sensor error.
Gia
Reviewed in the United States on May 26, 2024
Fixed a P0365 Camshaft Position Sensor 'B' Circuit Bank 1,” which is logged when the PCM detects an irregular signal from the camshaft position sensor. Code P0365 is caused by faulty CMP sensors, problems with the circuitry, and issues with timing components like the timing chain.For my case it was only this sensor that was the issue and not wiring or timing chain.Now my Jeep has a smooth idle and runs much better than it ever has befor.
ATVDUDE
Reviewed in the United States on February 28, 2024
If you have a Pentastar V6 and have a Camshaft error and your vehicle is in limp mode with the check engine light or traction control light on, this is the part for you. I tried Sensors from Advanced Auto, Napa, and A-Premium and they all caused problems and triggered their own different p-codes. Save yourself some time, spend the extra money and buy the actual OEM Mopar part. I ended up changing out this sensor 3 times before I got this one that actually works. Amazon claims this does not fit a 2013 Jeep Wrangler but it does.
Lynjams
Reviewed in the United States on November 22, 2024
TL/DR: Buy this one. It works.To say that I’ve been chasing a CEL gremlin for months is an understatement.I did a spark plug/ignition could change with both camshaft position sensors in June. I used aftermarket sensors. Everything was ok until it wasn’t. I had the dreaded jeep jk P090/P0345 codes that would not go away. I changed the oil, thickened the oil, changed the oil pressure sensor, changed the camshaft position phasers, did the cam learning thing, did another oil change, installed new clips on the bank 2 phaser and CPS and still the CEL wouldn’t go away. Until today. I installed the MOPAR sensor and my CEL is gone. Thank you god!!!! At least I know my first step isle bank 1 goes nuts.For jeep wranglers go for the OEM/MOPAR. It will save months of heartache. I’m not saying that taking the plenum all the way down to the oil sensor and re-installing everything in less than an hour isn’t an accomplishment. I just didn’t want to do it so many times in such a short time.If you’re reading this you’ve probably gotten the same codes. Just buy this one.Also, the Zon gods say this doesn’t fit Jeep JK 2013. That’s what I have and it does fit. It’s missing the leading 0 in the part number. The bag does include it.I’m praying that I don’t have to update this later.
T. W. Patterson
Reviewed in the United States on April 15, 2024
Wrangler throwing CSS code. Oh boy, is it the too tight pigtail, oil valley bolts loose? Luckily for me passenger side was seeping oil threw the bolt hole into the harness and was rectified by a new sensor.The sensors are genuine mopar and are priced better than auto parts store junk.
Master_willhelm
Reviewed in the United States on September 20, 2023
Arrived promptly in MOPAR packaging and in good condition. Identical to part being replaced. Worked perfectly in my 2016 Wrangler Rubicon to resolve camshaft sensor related trouble codes I was getting.
RG
Reviewed in Canada on September 15, 2023
Just what I needed for my Jeep 3.6L Pentastar. You know it is not a used or returned item since it is in a sealed Mopar plastic bag. I previously purchased a non Mopar replacement sensor at half the price that lasted 3 days only. For your knowledge it is 2 sensors in one and 4 pin.Super fast delivery!
Jptrebsha
Reviewed in the United States on October 24, 2023
Amazingly same part number as the OEM (2017 Chrysler Pacifica).
Sergio Heredia
Reviewed in the United States on May 19, 2022
Original Mopar Sensor. Great quality
B Smith
Reviewed in Australia on December 25, 2019
Works as described and at a great price
Recommended Products
