On a belt or hand carry your tools with this pouch. Plenty of pockets to carry many sizes of tools. Good quality, good price. Get one.

Excelente producto, siempre es calidad que que fabrican

I was issued this bag for work at a big cable company. The company gave me this and another one that is too big to fit on a tool belt for my liking. I carry a certain amount of tools that I use every day. That bags life came to a long-fighting end for I had to retire it due to how much use the 4 year bag has endured. I tried looking for the company that makes it to no avail. I finally see this bag, and it's the same bag but different maker CLC. I immediately bought it and it is the exact same bag but different brand. Regardless, this bag is awesome. Rain, cold, heat, humidity, etc.. it took it all. Awesome bag. Here's to wishing it'll last another 4 more years. Cheers.

perfect for holding my tools

It’s a good pouch but the pocket layout is different then my previous one which I’m not a fan of

This is the third time I’ve purchased this particular pouch, (And most likely will again). I work as an electrician, so I am definitely hard on my tools and such. The life of this product for me averages 2+ years.Pros: durable overall (see exception below), provides great placement for my hand tools.Neutral: I don’t use the carrier loop on the top (kinda in the way at times) snd I actually cut off the tape holder/ and clip (It get stucks on stuff, plus that's not where I usually put my tape anyway). As I said above, I’m hard on my equipment. from my first purchse to the second the larger 2-compartment area on the pouch got bigger. Room for more tools is a plus, but I liked it smaller. Tends to hang away from your body a lot moreCons: The seam at the bottom on the front pouches will eventually fail, and tools will start coming out (this is the ONLY reason I purchased a new one)

Larger than my old one but exact same layout. Previous one by same company lasted me three years of everyday use as an Electrician before my screwdrivers, which I keep inside the main pouch, poked a hole through it

Big enough to have quick tools for quick fixes.

Electrician for 16 years. I have used all brands of tool bags/belts. The old version of clc was pretty good. This is by far the thinnest material and stiching of any i have ever owned. Stiching at bottom of pocket ripped day one of use. Even if i got a lemon theres know way this pouch would Iast more than 6 months. I will be returning this one for sure. I purchased this pouch because its the only one i have ever used where wire strippers actually fit in the front pocket. My last was a rac a tier. Pretty heavy fabric and stiching. Lasted a year but all pockets in front were to small and hated it from day one. Before that had a klein. Thin material and pockets were to small also. which lasted about a year also. Before that i had the old clc. Great pouch. Lasted probably 5-6 years. Also had the old teal and black gatorback which was decent also. Lasted 4 or 5 years. I know they make a new version of that but can just tell from pics pockets in front are to skinny for strippers, dikes and needle nose. Can someone please make a quality pouch that actually has pockets designed for tools of the trade.

Just an excellent electrician's tool bag with plenty of pockets for your tools. I had a hard leather one that had seen better days and I didn't want to buy another leather one and decided to go with this one. Great decision because this bag holds my lineman's pliers, diagonal cutters, wire stripper, knipex cobra pliers, two sets of screw drivers (one insulated one non), 2 files, Fluke tester, long nose pliers, punch, torpedo level, pencil & marker, tape measure, rolls of tapes, and I still have a couple of empty pockets left. I also like the carrying handle. Looks like is made of durable material, time will tell. Made in China.

The absolute best electrician's tool pouch on the market!!! I love this tool pouch. I was a diy-er for nearly a decade. I read Family Handyman religiously and remembered an article about being efficient. They said the key was a high quality tool belt. You have all your tools at your side. You get your work done quickly and you look professional. I went to Lowe's and Home Depot and had gone through a number of tool pouches. Some were gaping wide, some were too small some lacked tool loops. Some were too shallow where all my tools would fall out. Well recently I got a job as an apprentice electrician (yeah, I'm an electrician ;) ) and my foreman said I had to buy a "real" electricians tool pouch. He, with 40 year, said you have to have a place for each tool, lineman pliers, diagonal cutters, needle nose pliers, various fastening screw drivers, like 12 tools at least.I ran to the "Home Depot" and bought a sweet looking electrician's tool pouch. "Dead On" electrician's tool pouch. What a piece of junk! first of all, when it had all my tools it in, it was so gaping wide some of my tools would fall out. Experienced electricians would laugh at me. It was shallow again causing tools to fall out. It had a rubber bottom to ensure that it stayed standing up when put down on the ground when used as a carry along pouch. Well the problem was that the rubber bottom rubbed against my leg like a rasp and I got a rash. It was horrible.I decided to research the heck out of this electricians pouch. Sweet sweet Nirvana!!! My deep love and devotion to Custom Leathercraft had begun. This is the 'near' perfect electrician's pouch. First of all it is deep. Not a single tool has fallen out. I have hundreds and hundreds of dollars of tools in my tool rig. Klein Lineman 36 dollars, Klein Needle Nose Pliers 35 dollars, Irwin power slot diagonal cutters, 35 dollars, etc. The bag is deep is slim. When you climbing ladders or walking through tight spaces your tools don't get caught, or slightly get caught. When you do take off your tool belt. you can carry around the pouch like a tool bag since it has a nice little handle. It's slim and stays tight against your leg. The fabric is solid I can see it lasting for years and years to come.The people who designed this tool pouch really analyzed and trouble shout the design. This is craftsmanship at its best. They don't just say, let's build a bag, put tool slots in it and a pretty logo and ship it out. These people have done extensive research and have mastered the design. I personally would like to meet the people who designed this bag. I'd tell them great great job.Still not perfect...Why don't you put a couple of hooks on the top so you could attach suspenders directly to the tool pouch rather than the belt?Other than that, I feel like Tony Stark as Iron Man when I wear this tool pouch. POWERFUL. I liked it so much I bought 4 other Custom Leathercraft pouches and I love them all. Also bought the custom leather craft work gloves.