Your cart is empty.
Your cart is empty.Product Description
This blade features a thin kerf, which makes it ideal for saws that are a bit underpowered, but at the same time this tool delivers great performance. You will be satisfied with the excellent price/quality ratio. The laser cut heavy-duty blade plate is hardened to allow for great resistance (46-48 Rockwell in hardness) and features expansion slots to reduce noise and anti-vibration design. The teeth are made of micrograin carbide to ensure long-lasting cutting performance and deliver smooth cut on wood and wood products. These are brazed to the blade body through a special trimetallic bond (copper-silver-copper), so that longer cut performance and resistance are guaranteed. Blade is delivered in a unique CMT plastic case.
From the Manufacturer
CMT's Industrial Thin Kerf Design is ideal for ripping applications, since the blade removes less material, putting less strain on the blade and your saw. That translates into less heat build-up during the cut, so you'll get more cuts between resharpenings, and longer life from your tools. These blades feature the finest micrograin carbide teeth in a combination of one flat-top tooth followed by a pair of 15 degree alternating top bevel teeth. And of course, they include all the other great ITK features, including Anti-Kickback Design, Tri-Metal Brazing, Precision Balancing, Laser Cut Arbors and carefully positioned Expansion Slots and Sound Dampening Channels. ITK blades also include CMT's unique laser-marked safety instructions and complete, illustrated resharpening information.
Josh Yaroch
Reviewed in the United States on February 2, 2025
Smooth cutting, blade is stable with little vibration, works great and easy to use.
William E Sibrinsz
Reviewed in the United States on February 19, 2025
Finally used the new blade today. Clean cutting and no chatter while ripping 5/4 red oak . Very happy with this blade.
Cole Ostamie
Reviewed in the United States on January 21, 2025
The blades cut like hot knife thru butter and the carbide tips stay sharp
Jillian
Reviewed in the United States on January 12, 2025
Got this as a gift for my husband because, apparently, saw blades are way more exciting than anything practical. The moment he unwrapped it, he looked at me like I finally understood him. I have no idea what "80 teeth" means, but he’s been out in the garage ever since, grinning and saying things like “clean cuts” and “smooth finish.”If you want to impress a tool-obsessed spouse, skip the tie and get this saw blade. Bonus: it keeps him busy, so I can finally watch my shows in peace!
Paul Bayley
Reviewed in the United States on May 18, 2024
Well-made, scary sharp and a fair price. I got this one 45% off.......... just $10 more than the cost of sharpening the one I already have. As a woodworker of many years, nobody will ever convince me that one needs to spend more than $100 on a table saw blade.
Hank W
Reviewed in the United States on December 16, 2024
I like these blades soooo much, I've standardized on these in my shop. I have 40, 60 and 80 tooth blades that I use for different applications on my table and miter saws. IMHO, best price, value and cutting quality. It is sad that most of your old blades are no longer worth sharpening because these blades are so reasonably priced.
Xander
Reviewed in the United States on November 20, 2024
For woodworkers not spending money on expensive, high end blades I definitely find these to be the best value. They cut very well and maintain their performance for a long time. Unlike comparable blades at this price point, they're also capable of being sharpened multiple times for an even longer lifespan.
Cristóbal Ruiz
Reviewed in Mexico on September 6, 2023
En ninguna parte de todo el envoltorio ni en ninguna página, ni en la de cmt dice el grosor del disco, es thin kerf y eso le agrega un plus a este disco
JOSE RAUL GARCIA MARTINEZ
Reviewed in Mexico on July 20, 2023
BUENA CALIDAD, VALE LA PENA
Misha Pesic
Reviewed in the United States on May 3, 2023
wow what and amazing blade for the price. i compared this blade with a $60 30T glue line blade and a Irwin Marathon ripper. All blades were used to rip oak as it was what i had in hand for this quick test.First the Irwin is the thinnest blade i used at 0.095" and maybe you can get one sharpening out of it but its basicly a throw-away. I cut a lot of lumber with this blade and did a fine job for fast cutting. For rough sheeting and and ripping lumber its a beast but for the test it did leave a lot of secondary cut tooth marks on the wood. That being said, i concluded that this blade does only what its made for. Economical rip blade for rough and fast lumber cuts. Being so thin and fast it should get more attention than what it does but also should be priced at $20. Its not sexy or flashy at all but does a great job for its intended purpose at under $30 for a 10" table saw blade.Second blade i used for this quick test was the Diablo 30T glue-line blade. its selling point is that its a ripping blade that produces a smooth side wall cut that leaves no teeth marks and wood can be glued up off of the saw. i would say over all it does a great job of that. it produces smooth cut with very few secondary teeth marks present on the wood. i think if i pushed the wood harder along the fence or turned the saw off before the cut was finished, there would be no teeth marks. the blade did seem to feed a "hair" (little) slower than the Irwin Marathon but cut quality was dramatically improved and i would say the advertised glue line joint is correct. I imagine the hair slower cut speed was due to the slight increase in teeth count and slight thickness in blade width, at .105" (still considered a thin kerf).The CMT was up next, with 24T and thin kerf at .105 which was same as the Diablo. i suspected since this blade was a standard ripping blade that the cut quality would be in between the Irwin and Diablo. i was totally surprised that while having the speed of the Irwin the cut quality was actually better than the glue line Diablo! what an amazing blade! the added bonus is that on the back of the blade there are sharpening angles and its made to be sharpened multiple times. At a price of exactly the same as the Irwin at under $30 this blade is a total STEAL and my new go to brand for all my blades including circular and miter saws. Forget the more expensive blades, they are not worth it when this one is so good at this price! will not be disappointed.
molotlovjl
Reviewed in Mexico on February 26, 2020
hasta ahora no tengo ningún problema con maderas duras.
Carlos Alanis
Reviewed in Mexico on November 4, 2019
Esta sierra es excelente, si solo necesitas hacer un corte rápido pero preciso, ésta es la sierra. Corte excelente y suave, la utilizo para carear madera irregular para después limpiar y los demás lados o para cortes de madera donde no necesito tanta precisión o corte limpio, pero aún así es estupenda porque lo hace.
Recommended Products
$379.95
$ 99 .00 $99.00
$47.98
$ 23 .99 $23.99