Your cart is empty.
Your cart is empty.Since 1880, H.K. Porter has been the leading brand in cutting tools with a worldwide reputation for quality, strength and durability. The extensive line of products includes manual cutters, ratcheting cutters and specialty tools designed to handle everything from light wires and brushes to heavy steel rods and bars. Superior strength cutting heads and blades provide more efficient cutting. Precision cutting edges are accurately beveled for specific types of cuts. Alloy tool steel cutting jaws are drop forged for maximum wear resistance and longer cutting life.
Russ M
Reviewed in the United States on February 6, 2025
We mount to a 2 x 8 for stability and they work great!
Matthew D. Bixby
Reviewed in the United States on September 23, 2024
These work well but it's a workout not for the faint at heart or slight of limb
MEmeryP
Reviewed in the United States on July 13, 2024
As advertised, this bender/cutter bends and cuts #3 and #4 Takes a lot of strength/leverage to work though.
Dev Starr
Reviewed in Canada on July 13, 2024
Great
Mike
Reviewed in the United States on February 22, 2024
Made 150 cuts and bends in #5 5/8 rebar and need a massage now but it didn’t trick. Wish the handle was longer. Dont forget to lint it to a board for stability.
Customer
Reviewed in the United States on November 6, 2024
It works quite well. It needs a few bends to smooth out due to the thick shipping grease. It does quite well with 1/2 inch rebar in bending and shear cuts. I did a test run on 5/8 inch. It works with a good deal more force required. I trust it will hold up to all my needs. About 4 inches is the smallest between 90 degrees you can do. You will likely have to elevate it for compound bends that are offset. Forming squares of about 13 inch sides went quite well.
brad
Reviewed in Canada on January 7, 2024
Perfect tool to cut and bend rebar to the same quality as ordering from a rebar fabricator. Adding 4ft 2x8 to make a "T" shape reduces cutting and bending effort in half. With out adding a board too much effort is waisted on trying to keep the tool from twisting sideways.
curtis k.
Reviewed in Canada on January 2, 2024
Cresent made in China. This cutters are improved , with the addition of the cutterhead being supported on both sides now. But the stops to keep the bar being cut from being torqued at less than right angles to the cutter face are cast very poorly and do nothing because they are short of the ability to contact the rod being cut. I have used the original brand for over 45 years and wore out a few in my days doing concrete work. How durable these are remains to be seen ?
Customer
Reviewed in the United States on May 2, 2023
Well made. I don’t think it will break.
Mark Wilson
Reviewed in Canada on October 15, 2023
Time saver
Kyle
Reviewed in the United States on January 25, 2023
The rebar cutter works great for small projects. It is easy to use and work as intended. We used to make a concrete pad. The safety features are good.
mike michalezki
Reviewed in Canada on September 24, 2022
This unit worked better than I expected based on a different unit I used before. It cuts and bends both 10mm and 15mm bar well. It does take some muscle power but not more than expected
me
Reviewed in the United States on August 30, 2021
update: June 14th 2023has worked flawlessly and I recently needed to cut several hundred pieces of # 5 rebar and it did so without complaint.other than being slightly faded on the pretty paint as it has stayed outside continuously.I can recommend this model.orig review:heavy duty and stable once you mount it to a 2x8 boardif I had to do this for a living I would invest in a power cutter/bender but I don't so this is exactly what I need
Recommended Products
