Your cart is empty.
Your cart is empty.If you are looking for a mask that has been in a product line for years and has proven itself to be a universal and quality mask then look no further. The Cressi Focus is the traditional battle horse of the Cressi range and one of the most popular masks in the world. Light and compact, it has a soft 100% hypoallergenic liquid silicone skirt, complete with double feathered edge seal that provides an excellent fit and high level of comfort even with prolonged use. A low volume mask with minimum eye-lens distance ensures excellent field of view in all directions. A two tempered glass lens mask that is also available in an optical version (see accessories above or SKU: CSBMLF15). Mask has swivel easy adjust strap buckles. The silicone mask strap is a wide split strap for even dispersion for increased fit and comfort. To protect your mask when not in use the Focus comes with a hard plastic protective mask box.
Richard S.
Reviewed in the United States on January 25, 2025
I play underwater hockey using this mask twice a week. I like it. I had to replace the headband because the one which came with it didn't stay in place on my head, but that's true with every mask that I've tried. I also bought lenses to replace the faceplate (due to my poor vision), and they work well.
Maske
Reviewed in Turkey on June 28, 2024
Ürünü kesinlikle tavsiye etmiyorum. Buğu yapıyor.
Barış
Reviewed in Turkey on March 11, 2024
Aynı model maskeden uzun yıllardır kullanıyorum. Bunu yedek olarak aldım. Yüzü biraz küçük olanlar için çok ideal bir boyutu var. Silikon kalitesi çok iyi uzun süreli dalışlarda hiç rahatsız etmiyor. Ben scuba dalışlarında kullanıyorum ama küçük hacmi sayesinde serbest dalışlarda da kullanılabilir. Fiyatına göre tam bir performans ürünü diyebilirim.
Raquel
Reviewed in the United States on March 1, 2024
Fairly Easy to switch out corrective lenses (see YouTube videos). Perfect for snorkeling, very comfortable with good seal. Scuba Monkey seller was terrific.
msawrey
Reviewed in the United States on December 21, 2024
Very good quality and better than expected mask for snorkelling.
alexandra stock
Reviewed in the United States on December 20, 2024
Great price ! Holding up well if maintained properlyWould buy again
Chad McArdle
Reviewed in the United States on October 4, 2024
Like this because you can manually add in vision lenses based on your eye Rx diopter. Can buy lenses separately much cheaper than a custom RX scuba mask. Google videos on how to disassemble the mask to swap the glass with the corrective lenses. Was easy to do. Been using this mask without issue for a long time!
Fawzi Alshehri
Reviewed in Saudi Arabia on November 1, 2023
Since 2009 Cressi is my favorite brand.This dive mask has a good quality and fit well on my 12y daughter’s face 100%. But unfortunately when I use it, it looks fit well on my face but when I do equalization there is small amount of water come in.So I’m going to try Pano 4 it may fit well for me 👍
MidMom
Reviewed in the United States on January 2, 2023
This product worked great for me. I was able to get a "prescription" corrective Cressi lens for each eye. Get your scrip and reduce by 0.25 (how much water magnifies) and round down nearest 0.5 stock lens size. I used correction lens of -4.5 left and -4.0 right and it worked fantastically for me.I got a good description and the suggestion to use a cell phone pry tool on a dive forum and also watched a YT video to change out the lenses. The plastic pry too worked great and if you review where the tabs are you can disassemble and substitute the lenses very straightforwardly. There is no astigmatism correction on the lenses but under water is wasn't noticeable for me.The mask itself fit my smaller face very well. It looks a little large on the face for me. Although a dive mask seems a little overkill for a snorkeling experience, the total expense was completely worthwhile. If you can't see the shape detail of tree leaves without glasses, you aren't going to see much underwater for small fish, coral, etc. This mask is a great option for nearsighted people. It's also surprisingly well made for something that is all plastic framed. I purchased the same mask for my husband. Size looked right on him. He has a longer narrow face compared to my round one. Fit him ok, but not perfect. Overall pleased with quality and the option to add lens correction.
OR
Reviewed in Mexico on April 1, 2022
Me gustaron mucho, ajustan perfecto y el silicón es de muy buena calidad. Excelente opción si son de tus primeros visores.
Richard from Devon
Reviewed in the United Kingdom on December 9, 2019
These lenses provide an excellent off the self solution for those of us who are near-sighted. Hence the 5 stars.However, you need to fit them into the mask and there is no guidance given about how to do that. It isn't simple. You need to dismantle the frame of the mask, remove the standard flat lenses, replace them with these and then reassemble.UPDATE I have now been using this mask for a while and found it excellent in terms of fit and comfort. Low volume so it is easy to clear if any water should get in.How do you get the mask apart? I suggest you look at a post on scubaboard (search for cressi focus scubaboard).I used an old credit card rather than the prying tool described on scubaboard. I also found it easier to slide the card along the top edge of the lens frame rather than around the nose side as described. I found it difficult to refit the lens frames over the new lenses. One of them just didn't want to go back. After a lot of perseverance and some sore fingers it finally popped into place. If I was to rate the fitting process it would be just 1 star.
Long Beach Native
Reviewed in the United States on October 6, 2015
The lenses fit the Cressi Focus mask just fine, and it's a good mask.I'm deducting TWO stars because of the incredible frustration trying to figure out how to install prescription lenses in the mask. A single sheet of paper with a couple of illustrations would be so easy to include, but there is nothing!Once you understand HOW to remove and replace the lenses, it's pretty easy. But it is NOT intuitive, and I couldn't find anything online that explained it clearly.FYI, here are the basic steps:1. There is a small triangular piece of plastic at the top of the nose. This must be pulled straight out, as you look at the mask. You can see behind it that there is a little tab. If you push the tab towards yourself with a small screwdriver, that will push this piece out.2. There is a bridge (where a unibrow; would be) with the Cressi logo on it just above the piece that you just removed. That piece needs to be pushed straight up, towards the ceiling as you face the mask. It's just a friction fit.3. Here is the hardest part to figure out: the two plastic rings that hold the lenses in place. You can't just force them out. If you look carefully at the front of the mask around the outside of the two retaining rings, you'll see three areas about 1/2 inch long each, which is where there are little plastic tabs that stick out from the retaining ring and hold it in place. [NOTE: My mask had a clear surround, but if your mask is a color then you won't be able to see where the tabs are.] The ring is somewhat flexible, so all you need to do is get a fingernail (or carefully with a small screwdriver) on the outside of the ring near one of the tabs and push inwards towards the center of that lens. This will get the tab out of its slot and allow you to pull it forwards slightly away from the lens. Do this for all three tabs.4. The old lens pops out at this point, and you simply set the new lens in its place.5. The only tricky part about putting it all back together, is that you really need to exert some force when pressing the retaining rings back into position against the face of the lenses. The tabs need to snap back into their retaining indentations. If you put the mask face-down on a table, you can press down on the inside of the mask and that will help force the retaining rings all the way back into position.6. Now it's easy: simply replace the unibrow piece by pressing it straight down from above - you can see the plastic part of the mask that it slides down onto.7. Finally snap the little triangular piece back into position by pressing it straight in. Again, after it's out, it's easy to see how it goes back in.Sheesh, why couldn't Cressi have included this little explanation along with a few line drawings with their mask and/or lenses?
Lisa Fine
Reviewed in the United States on November 18, 2014
Works great with replacement lenses! That's the neat part - good to see clearly underwater. Nice that the mask is economical, because the lenses will cost more than the mask (the mask does have Plano lenses in it, for those who do not require the prescription-type lenses). Also, once you put replacement lenses in, you may likely find that you cannot read your gauges anymore if you are older and require reading glasses. In this case, you can also add the stick on Dive Optix - the whole rig then ends up being around 140 bucks - but it is likely much less expensive than getting a custom ground setup? The one negative is that they don't give you ANY instructions on how to change the lenses on this mask. I had to figure it out. The browpiece (with Cressi name) slides straight up, with the help of a little screwdriver. hard not to get a nick or two during the process! Then, you will see tabs under the browpiece for each retaining ring. Carefully lever under those and pop the retaining rings out. Then you can push out the lens from the underside (diver side), being careful not to disturb the silicone seal the lens rests on. Put the new lenses in and reverse the process - and you are good to go!
Recommended Products
