Your cart is empty.
Your cart is empty.C.S. Osborne Copper Rivets & Burrs. 1 lb. pack package of CS Osborne 3/4" Long Solid Copper Rivets and Burrs. Heavy duty, rust proof permanent fasteners. They are easily set with Osborne No.169-6 rivet setter. Made in USA. Size Number : 12 Diameter under head (inches) : 0.137 Overall length : 3/4" Approx. number of rivets & burrs per lb. : 186 Tool to be use : Osborne No. 169-6 Instructions : Push the rivet through the hole then turn the material over. Place burr on rivet, then use the rivet setting tool’s straight hole to drive the burr down tight against the material. Cut the rivet off close to the burr with side or end nippers. Do not cut off flush with the burr, but leave about 1/16 of an inch above the burr. The hole on the side of the rivet setter can be used to dislodge any waste that is wedged into the tool. Place the concave recess of setter on the burr. Hold perpendicular and strike the tool forcefully, turning to the left then right as you strike. This spreads the end of the rivet over the burr, simultaneously rounding its end. A few extra blows from the # 57 riveting hammer can be used to flatten the rivet end a bit, if desired. (Setter and Hammer Not included)
B Phlegar
Reviewed in the United States on January 29, 2025
Well made and a good value for the price.
Anon7
Reviewed in the United States on October 8, 2023
This is my 3rd or 4th box of these I have purchased and it seems the quality is beginning to slip on these.The latest batch i received are significantly softer than typical. This is making the rivets fail and the washers not set correctly.Not sure whats going on, but looks like i need a new rivet supplier.
Prof
Reviewed in the United States on July 19, 2022
These are tough rivets. Thick and strong but bevel well when hammered
Jim perry
Reviewed in the United States on January 6, 2022
Good product and will buy again.
Recommended Products
