Your cart is empty.
Your cart is empty.Product Description
Refining Focus
- Fine-tune the focus by rotating the Focus Dial either clockwise or counter-clockwise until achieving optimal sharpness in the image.
Lock Button
- The locking button needs to be pressed to flip the magnifier, this design helps to avoid accidental flipping.
Windage & Elevation Adjustment
- Fine-Tuning W&E for Ideal Centering
- Avoid excessive force when encountering resistance or reaching the end of the adjustment range with these screws.
Better Eye Relief
- An eye relief of 52mm ensures an enhanced aiming experience.
-
Red Green Dot and Magnifier Combo
-
Red Dot and Magnifier Combo
-
Red Dot and Magnifier Combo
-
Green Dot and Magnifier Combo
Rider
Reviewed in the United States on March 15, 2025
It works, but it does the bill qualities poor and it’s not stable. It moves around is not from being on the gun. It is from how they built it. It’s just a cheap Magnifier. You really do pay for what you get.
I buy lots of crap here
Reviewed in the United States on February 19, 2025
At first glance, it seems like a well-built optic. Well, that ends once you mount it and pivot the sight to discover very high tolerances in the machining, resulting in several millimeters of movement at the optic. I never fired with it, but I'm guessing that on anything other than an airsoft it would be dancing around, basically worthless.
Customer
Reviewed in the United States on January 5, 2025
First one I received was not good. Out of the box the red dot was low right and would not center wit height or windage. Returned that and caught another . Reason was the glass was very clear and magnification was really good. Manufacturing issues will happen and I understand that. The new one I received as of now seems good. But still need to test it at the range.I’ll be posting in a few weeks.
Debra Brinkman
Reviewed in the United States on March 21, 2024
My first impression of the scope, after the nice plastic storage case, was that this thing looks incredibly solid and robust. I don’t know what the official definition of “Mil-spec” is but, unofficially, I would want to put this into that category because it feels solid as any piece of kit that I got in the army.The kit comes with a variety of risers, plus the bolts and tools to install them. It also comes with a set of instructions (all in English, which surprised me), which are clear and easy to understand. These instructions also contain hi-res photos instead of illustrations, which I really appreciate.When I was playing around with the hinged base before mounting, I was a little concerned because the unlock button mechanism seemed a little tough but, once I had it mounted on my rifle, I found it to be just right. It has an excellent balance between ease-of-use and tight tolerance (more on that later).Mounting was a snap. I had it secured to the rail on my AR very quickly. Most of the bolts come with a dab of Loctite on the threads but, in my opinion, it would not hurt to put a dab of your own just to make sure.As it turned out, I did not have a need for the included risers, but that could easily change, depending on the type of red dot site that I may chose to put on in the future. The included risers have a thickness of 3 mm and 4 mm respectively and do not appear to be stackable with the included bolts (M5x7 and M5x10), but if you were to get some longer bolts, like an M5x20 or M5x15, I am pretty sure that you could get it to work. I know some people need extra height for certain set ups.I opted to mount the scope all the way back, above the charging handle. This position worked well for me. In allowed for quick target acquisition with the stock fully extended. With practice, I can also get a good stock weld with the stock fully collapsed, which kind of surprises me.As stated earlier, swinging the scope out of the way, is easily accomplished with a press from my right index finger on the release button. The mount is also reversible for lefties, in which case they would likely use their left thumb instead. The hinge swings easily, but snaps into place in both positions with no slop or weird movement. I was also pleased to discover that with the scope swung out, it did not seem to throw the balance of the rifle off at all, bringing the rifle up to ready was still fast and easy.I was also pleased to discover that the optics were crystal clear. Magnification was excellent, and the windage/elevation adjustments easily align the scope with the dot for an optimal sight picture. The included L-shaped wrenches have a flat blade screwdriver tip opposite the torx for this purpose.All-in-all I find is to be an excellent little piece of kit and I expect to get a lot of use out of it.
Jane Bender
Reviewed in the United States on December 13, 2024
Terrible sight. Bad quality. I’ve had 2 replaced and come in the box broke
Craig Hogan
Reviewed in the United States on October 25, 2024
I had ordered the iteam and after the first use of sighting it in it broke. I reported it to the company and they sent e a replacement. The part works great with little wobble. I appreciated the response from the company to my complaint.
P. Shackleton
Reviewed in the United States on October 19, 2024
There are some things to like, but at the end of the day, I couldn't find an eye relief solution. I have an iron rear sight mounted on the very last picatinny slot. When folded, it extends over the charging handle. I mounted the CVLife magnifier *immediately* in front of the iron rear sight, and the CVLife red dot immediately in front of the magnifier.The only way I can get to a proper eye relief is to set the six position collapsible stock in the shortest possible position, the exact opposite of what you'd want to do for a longer range shot that the CVLife magnifier is presumably meant for.I'm keeping it, instead of returning it... but just barely. I can do without the iron sights... but even that will only get my stock to he first position longer than the shortest.I would be interested to know if anyone else has a solution to this problem.
Tide Man
Reviewed in the United States on January 31, 2024
The CVLIFE 3X Red Dot Magnifier has significantly elevated my shooting experience, offering enhanced precision and adaptability. The flip-to-side mount, along with focus adjustment, allows for seamless transitioning between magnified and non-magnified views, catering to various shooting scenarios.The windage and elevation adjustments provide fine-tuning capabilities, ensuring precise alignment with the red dot sight. The compatibility with Picatinny rails adds versatility, making it suitable for a wide range of firearms.The 2.2 inches of eye relief enhances comfort during extended use, and the magnifier's build quality is robust, with durable materials ensuring longevity. The 36/38/40MM height options allow for customization based on the specific requirements of the shooter and their firearm setup.Installation is straightforward, and the overall design is user-friendly. The added magnification not only aids in target acquisition but also provides a clearer view of distant objects, enhancing overall shooting accuracy.In conclusion, the CVLIFE 3X Red Dot Magnifier is a valuable addition to any shooter's arsenal. Its flip-to-side mount, focus adjustment, and adjustable height options make it a versatile and reliable tool for those seeking improved precision and adaptability in their shooting experiences.
Recommended Products
$74.99
$ 35 .99 $35.99