Très pratique pour alimenter tous les hub de domotique. Bien choisir son modèle en fonction de la puissance électrique nécessaire, de la vitesse réseau et du connecteur du hub.

I recently picked up the DSLRKIT DC 5V 2.4A Active PoE Splitter (802.3af) to power my Philips Hue Bridge (Hue hub) via Power over Ethernet instead of using a separate power adapter. After a straightforward setup, it’s proven to be an incredibly handy addition to my smart home setup.Key BenefitsSingle-Cable ConvenienceBy using this splitter, I can now run both data and power over a single Ethernet cable from my PoE switch to the Hue Bridge. This cuts down on clutter and frees up a wall outlet.Sufficient Power OutputThe splitter delivers a steady 5V at up to 2.4A, which comfortably meets the power requirements of the Hue Bridge (2A is typically recommended). I’ve experienced no dropouts, restarts, or connection issues since making the switch.802.3af CompliantSince it’s 802.3af compliant, it works seamlessly with standard PoE switches. There’s no fuss with proprietary adapters—just plug it into a PoE-capable port, and the splitter handles the rest.Straightforward InstallationEthernet In: Connect the splitter to a PoE-enabled Ethernet port on your switch.Ethernet Out: Run a short Ethernet cable from the splitter to the Hue Bridge’s network port.Barrel Plug Out: The 5.5x2.1 mm barrel connector goes into the Hue Bridge’s power input.After plugging everything in, the Hue Bridge powered on immediately and maintained a solid network connection.Compact DesignThe splitter’s small form factor makes it easy to tuck away behind a cabinet or entertainment center. It doesn’t generate much heat, and there’s a small indicator LED that confirms it’s receiving power.PerformanceStable Power: After several weeks of use, I haven’t experienced any flickering LEDs or dropped connections with my Hue lights. The Bridge stays powered 24/7 without a hitch.No Noticeable Latency: Moving power management off to the PoE splitter hasn’t added any lag or reduced responsiveness in the Hue app—everything remains snappy.ConsiderationsPoE Switch or Injector Required: You’ll need an 802.3af-compliant PoE switch or injector. If you don’t already have PoE in your network setup, that’s an additional cost to factor in.Cable Management: While it does reduce a power brick in your setup, you’ll still have a small splitter and some short cables to deal with. Overall, though, it’s still more streamlined than using a separate AC adapter.Pros & ConsProsFrees up a wall outlet by combining power and data into one cable.Delivers ample power (5V/2.4A) for the Philips Hue Bridge.Easy plug-and-play installation with a PoE switch.Compact and runs cool.ConsRequires 802.3af PoE source (additional hardware if not already present).You’ll still have a small box (the splitter) in your wiring path.Final VerdictThe DSLRKIT DC 5V 2.4A Active PoE Splitter is a great solution if you want to power your Philips Hue Bridge via Power over Ethernet. It simplifies cable management, delivers reliable power, and reduces the need for an extra power adapter. If you already have a PoE-capable setup (or plan to add one), this splitter is a worthwhile upgrade to keep your smart home hub neatly integrated and always powered.

Originally ordered this to POE enable the Hue Hubs in my house. With a barrel plug adapter, these have worked perfectly. They worked so well, I looked at some other devices on my network and found that it should also work for my Airthings Hub....and it worked just as well as it did for the Hue Hub (again requiring the barrel adapter).While I can't speak to the longevity, it's nice to find reasonably priced products that just work exactly as they should. Highly recommended.

It works I just wish it was somehow less bulky. There must be a way for them to make the box with the ethernet jack smaller.

I use these POE splitters to power various small devices on my network, including a Philips HUE Router, my TADO heating router and a small crypto miner, they have been running faultlessly for about 2 years now with absolutely no issues. I have mine connect to a Netgear POE switch for power distribution.

It does work it works as it should however, the sizing on the power port is a little small.Thankfully, I am an IT nerd and I know how to adjust that with a drillbit and a little precision and patience.However, it does work. I will be buying more.

I had to purchase an adapter separately (5.5x2.1mm female to 5.5x2.5mm male) to fit in the Hue hub power port. With that, the splitter powers it perfectly from my Ubiquiti PoE switch.

Works as advertised. I purchased two of them for my IoT hub devices to eliminate the need for power bricks. Totally unessiary, but it does clean up the wires for all of the power needs.Perfectly powers the Samsung SmartThings Hub (Aeotech) and Philips Hue hub.

Works great for devices you need to put in remote places, like positioning a smart home bridge or hub in a specific location, without running both power AND data.

Ich habe den DSLRKIT Aktiven PoE-Splitter vor Kurzem für mein Überwachungskamerasystem gekauft, und ich bin absolut begeistert von seiner Leistung! Hier sind meine Erfahrungen:Vorteile:Einfache Installation: Die Installation war ein Kinderspiel. Der Splitter benötigt keine komplizierte Konfiguration – einfach anschließen und schon kann es losgehen.Zuverlässige Stromversorgung: Mit einer Ausgangsspannung von 5 V und 2,4 A liefert der Splitter eine stabile und zuverlässige Stromversorgung für meine Geräte. Das hat mir viel Ärger erspart, insbesondere bei der Installation von Geräten, die normalerweise eine separate Stromversorgung benötigen.Kompatibilität: Der Splitter funktioniert einwandfrei mit meinem PoE-Injektor und meinen Kameras. Er erfüllt die Standards von 802.3af, was für mich eine große Sicherheit ist, da ich keine Probleme mit der Kompatibilität hatte.Robuste Bauweise: Das Gehäuse des Splitters wirkt sehr stabil und gut verarbeitet. Ich habe das Gefühl, dass es auch in einer raueren Umgebung gut funktioniert.Fazit: Der DSLRKIT Aktive PoE-Splitter ist eine hervorragende Lösung für alle, die Power over Ethernet benötigen. Er ist benutzerfreundlich, zuverlässig und bietet ein ausgezeichnetes Preis-Leistungs-Verhältnis. Ich kann ihn jedem empfehlen, der auf der Suche nach einer einfachen Möglichkeit ist, Geräte über PoE mit Strom zu versorgen!

I wanted to have a clean ceiling installation of my Ring Base Station, and this is the perfect solution, it provides power and data from my switch just like described. I also purchased another one for my Lockly Hub and works perfectly together.

Abbinato ad uno switch PoE alimenta senza problemi una periferica posizionata a 50mt di distanza e all'esterno. Non proprio piccolo ma nella media. Prezzo un po' sopra la media. Ora vediamo la durata. Consigliato

Tal y como se describe, todo perfecto.