Your cart is empty.
Your cart is empty.RobMars
Reviewed in the United States on March 1, 2025
The pin vise seems to be of quality construction. It holds the bits tightly. I've only used the #56 bits so far. The quality of the drill vice is just OK but I didn't expect much more. The only bits I have used so far are the #56 bits. I know they are small and can break easily, but not this easily. I'm using them to drill hard plastic aprox 1/8" thick. The first bit I used made it all the way through but broke on the second hole. Apparently it was the only sharp one in the bunch. The rest were too dull to penetrate the plastic and the tips quickly broke off. When I say penetrate the plastic, all they did was scratch the surface. I had inserted the bit as far into the pin vise chuck as far as they would go, so there was only about 1/2" sticking out at one point, but within seconds the tip still broke off. Maybe other size drill bits will be better but all I need is the #56. Now I need to purchase new bits because they have all broken.
christopher m.
Reviewed in the United States on February 27, 2025
On time, and from what I can tell so far, a good quality item.
phan_graph
Reviewed in the United States on February 10, 2025
Great little.set. very functional. Lots of uses.
Customer
Reviewed in the United States on January 23, 2025
The bits are made from a soft metal. And wouldn’t drill into metal. Some of the bits just bent under light pressure. They might be good for balsa wood or soft plastic
Jim
Reviewed in the United States on January 17, 2025
This set of drill bits is wide ranging with a very useful pin vise hand drill. These tools will come in very handy in my hobby work of pen repair.
Cameron
Reviewed in the United States on March 13, 2024
Overall, I am happy with this product. The pin vise is of perfectly acceptable quality. It wouldn't be reasonable to expect any higher quality for the price. The PCB drills are extremely sharp and seem to be of good quality. However, the larger twist drills are of very poor quality and not correctly sharpened. Some are reasonably sharp, some have a flat spot on the tip, and others are completely flat on the end.
Love to hunt
Reviewed in the United States on December 10, 2024
This is a nice hand drill kit. It comes with a vise. I use these drills for carburetor jet and cleaning work. There are so many uses that these kits can be used for. For what I needed this kit for it works amazing. It has a lot of different size drill bits that come in this kit and I also have a lot of other sizes. This hand drill is well built from aluminum alloy and gains a tight hold on the drill bits. This product does everything I need it for and I gave it 5 stars.
Patrick
Reviewed in the United States on November 14, 2024
I loved the price tag for this set and you get a variety of bits. They work well enough but are typical of lower quality manufacture. Many of the smaller bits are blunt and have trouble drilling at all. The bits above 1mm seem to have no trouble. Missing bits or extra bits of certain sizes may be desirable to some but consistency is key and I do not believe you will be able to replicate the bag I received.Testing the outside diameter there is a fairly wide variation among some of the bits and some missing entirely. The calipers are calibrated ASME B89.1.9-2002 with a tolerance of +- 0.001”.I received the following loose bits which I’ll pair into groups closest to their measurement as advertised. I did receive 49 bits. Just not all of the correct ones.Missing 1x 3mm1x 2.9mm at 2.94mm (ad 1x)1x 2.8mm at 2.83mm (ad 1x)Missing 1x 2.7mm2x 2.6mm at 2.58-2.63mm (ad 1x)2x 2.5mm at 2.47-2.5mm (ad 1x)1x 2.4mm at 2.42mm (ad 1x)2x 2.3mm at 2.27-2.29mm (ad 1x)Missing 1x 2.2mmMissing 1x 2.1mm2x 2mm at 1.95-1.98mm (ad 2x)1x 1.9mm at 1.93mm (ad 2x)1x 1.8mm at 1.77mm (ad 2x)3x 1.7mm from 1.71-1.74mm (ad 2x)1x 1.6mm at 1.56mm (ad 2x)3x 1.5mm from 1.45-1.51mm (one was longer so I fine it was supposed to be 1.6mm) (ad 2x)4x 1.4mm from 1.35-1.44mm (ad 2x)2x 1.3mm from 1.31-1.34mm (ad 2x)2x 1.2mm from 1.15-1.17mm (ad 2x)Missing 2x 1.1mm5x 1mm from 0.96-0.97mm (ad 3x)Missing 3x 0.9mm6x 0.8mm ranging from 0.78-0.81mm (ad 3x)3x 0.7mm from 0.71-0.7mm (ad 3x)3x 0.6mm all 0.6mm (ad 3x)4x 0.5mm all 0.5mm (ad 3x)
Recommended Products