Your cart is empty.
Your cart is empty.This kit contains both replacement distributor O-rings (the smaller one for the distributor shaft, the larger for the housing). The O-ring kit will correct oil leaks from the distributor housing, which is often misdiagnosed as a leaking main seal! Replacing the distributor O-rings can be done quickly and easily! The rings are made from high quality, heat and oil resistant Viton 75 rubber. This kit works with all 8 and 16-valve engines used Suzuki and Geo vehicles such as the Metro, Swift, Sidekick, Vitara, Samurai, Jimny and Tracker.
flyingmike
Reviewed in the United States on September 18, 2024
No leaks yet! I'm pretty confident these will last forever.
W800
Reviewed in the United States on March 10, 2024
I used this kit to reseal my distributor on a 1994 GEO Tracker 16v worked perfectly.
Tre J.
Reviewed in the United States on February 26, 2024
Caught in a bind with pesky leaks plaguing my distributor, I sought a remedy to keep my engine purring smoothly. Enter these o-rings, the unsung heroes of my repair saga. Upon installation, they snugly nestled into place, filling the voids between the distributor and housing with precision. Like a magic potion, they banished the leaks, ensuring a tight seal and reliable performance. Thanks to these small but mighty o-rings, my distributor and housing leak no more. A true lifesaver, I'd recommend them to any fellow gearhead facing a similar dilemma. Trust me, they're worth their weight in gold.
Ass hat
Reviewed in the United States on October 27, 2024
Sealed up the famous peaking distributor of my 1988 Suzuki samurai.
Edwin Cadenhead
Reviewed in the United States on May 21, 2023
Arrived on time and fit as they are supposed to, stopped the oil leak
John F. Bell
Reviewed in the United States on November 16, 2021
The large O ring is too skinny to fit the groove, it is large enough around but did not fill the groove at all. I needed to get the truck back on the road so I RTV'd the heck out of it and went ahead and installed. Otherwise I would have sent this back. Especially at the extremely high price. NOT HAPPY!!
CLP Enterp.
Reviewed in the United States on January 30, 2019
Installed distributor case O-ring with no leaks. The distributor shaft O-ring is some what difficult to install but lubed with light silicone grease and very slight wiggle with an intense push it does go in and seal properly. If you need to reposition the distributor gear (which you will) pull just a little and put your left pointing finger down on the shaft just until you barely feel the top of the O-ring and turn the rotor slightly and push back in. If you pull it out to far you will need go through the hard push situation again.
Customer
Reviewed in the United States on November 19, 2018
Also fits the G13BB distributorless 16V engines as well. The oring has to be the correct size on the cam sensor cap cover on the distributorless engines or you will crack the cover and it was hard finding a universal one at the store due to it being an odd size. I purchased this one and it worked perfect. It will work on any geo or Suzuki with the 1.3.
Recommended Products
