Your cart is empty.
Your cart is empty.Meathook Bagger Bars! The full measurements for the Meathook Bagger Bars are as follows.... Total height: as advertised. Total width: 36 inches. Distance between the uprights: 15 inches. Clamping surface width: 5.25 inches. Total pullback: just over 4 inches. Amenities: 1 1/4″ bar stepped down to 1″ diameter for stock/conventional controls. Both grips have 1/2″ X 2″ slots laser cut for internal wiring purposes. The throttle side is honed out and notched for fly by wire. Laser cut tubing yields the smoothest corners we can provide so the wires roll right through and out the generous slot at the bottom. Knurled center for non slip grip. Damn these bars are bitchin!! When we took to tricking out a Street Glide we wanted to combine chopper styling and attitude with a unique handlebar that Bagger Owners could truly call there own! We killed it! Since we introduced the Meathook Bars we’ve seen some guys trying to copy them, but the quality is simply not there. they made straight corners instead of the sexy and smooth arched points. They also have made no consideration for internal wiring where we work the inside of our bars to make your wires go through smooth like butter! There is just no cutting corners when it comes making high quality, great looking Original Meathook Bars! Believe us... You’ll get what you pay for! Our hand crafted, made one at a time Meathook Bars are designed to fit all touring models with bat wing fairings such as Street Glides, Electra Glides and Ultra’s. Nothing will add more attitude to your bagger than a set of Dominators Original Meathook Bars! They also work with the new fly-by-wire throttle system found on 2008 and later touring models FITS 1996-2023 HARLEY TOURING MODELS WITH BATWING FAIRING (FLHT - ELECTRA GLIDE, FLHX - STREET GLIDE, FLHTC - ELECTRA GLIDE CLASSIC, FLHTCUI - ULTRA CLASSIC ELECTRA GLIDE)
Customer
Reviewed in Canada on January 31, 2025
Very happy with my ape hangers look sweet on my street glide
W. Nicholls
Reviewed in the United States on September 4, 2024
Increased height & width of stock. Added mirrors & looks great. 10” works for me & 12” is most popular. Very comfortable.
Denis Baker
Reviewed in Canada on May 6, 2024
Don't buy these bars if theyare not pre wired!! I never managed to wire my left side. I had to natch the lower bars to match the OEM bars to pass.the left wires externally.
Nick
Reviewed in Canada on February 13, 2023
This is my second set of handlebars for my second bike handlebars are awesome great quality wires are a little hard to fish but that is expected all in all great quality. And if I had a third bike I would buy again thank you
David
Reviewed in Canada on March 21, 2022
Fit parfait pour mon yamaha venture royal star!
Harpreet
Reviewed in Canada on April 4, 2022
Edges need file completely then you can slide in handgrips still need lube for it.
Customer
Reviewed in the United States on March 11, 2021
Don't waste your money. They look and feel amazing but quality is completely missing. when I leaned the bike up to put the kick stand up I felt something wasn't right like the riser bolts were loose, then about 2 miles down the road the entire left side of the bars snapped clean in half at the weld. All of this happend in the first 2000 miles so I contacted seller and let's just say that the lifetime warranty they claim to offer is a total joke.
Zach
Reviewed in the United States on November 15, 2021
Purchased these for my 2013 Street Glide, was on a budget but did not want budget quality. Thought I'd give the Dominator 10 inch handlebars a try. Upon receiving the product, welds look great and no chrome discoloration, HOWEVER. When fishing the wire harness through the bars, the wires were sliced apart once they came out of the other end. Upon further examination, it seems that the manufacture did not deburr the inside of the bars. What could have been an easy and quick installation, turned into an all-day fiasco, trying to repair the factory wire harness, ended up having to hardwire things in.
Amanda
Reviewed in the United States on October 24, 2020
Everything was perfect, but the chrome is not perfect. It looks kinda discolored. Reached out to the company and they wouldn’t respond
Jeff
Reviewed in the United States on May 18, 2018
Great bars and a reasonable price.
Lori
Reviewed in the United States on December 31, 2018
Great looking bars. It was very difficult to pull wires through the bar. I am very pleased with the bars and the feel when riding. I am 5’10” and the bars are at good shoulder height. Went to bike week and had several complements on the look. I recommend extending the wiring but not needed. With shorter wiring the plugs have to be relocated so they will plug in to the harness.
Ryan Oloteo
Reviewed in the United States on October 6, 2018
Love these bars. Hard as hell to pull the throttle cable through the bars though. No extended cables were required on my 2017 street glide
Paul S.
Reviewed in the United States on October 16, 2018
Slag in down tubes prevented wires from being pulled, would not buy again.
Recommended Products
$42.95
$ 21 .99 $21.99