Your cart is empty.
Your cart is empty.This air door actuator directly replaces the original actuator on specific vehicle years, makes, models, configurations and positions to restore proper HVAC operation. Please note that many vehicles have several different air door actuators, which are designed for specific positions and functions in the vehicle. To ensure you have what you need, carefully review the application notes for this part to verify it matches the position and function of the actuator you need to replace. In some online ordering systems, you may need to enter your vehicle information first to see the application notes for your vehicle. If you don't know which actuator position you need to replace, consult a qualified service technician. This part is compatible with the following vehicles. Before purchasing, enter your vehicle trim in the garage tool to confirm fitment. [Jeep Cherokee: 1998, 1999, 2000, 2001] - [Jeep TJ: 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006] - [Jeep Wrangler: 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006]
Joseph
Reviewed in the United States on January 5, 2025
Fit my 2004Jeep wrangler , works great.
Greener
Reviewed in the United States on August 5, 2024
My 1999 Jeep Sahara was getting the well known clicking sound when you set it to full cold. Mine was located about there the passengers left foot would be. 3x 10mm screws, and disconnect the cable. I installed the gear piece so it matched the old one I took out, there is a flat spot on the sprocket so you only can install it one way. Once installed I turned the key to ON and I could hear it moving the blender door, no clicking! I'd say it took 10 mins total. Putting the screws back in was trickier than getting them out, but still a super simple fix.
Joseph
Reviewed in the United States on May 23, 2024
This fit my 2002 Wrangler. I bought two from another company and neither worked.This worked perfect right out of the box, and I have heat now!
Mike Weber
Reviewed in the United States on December 31, 2024
Recently I changed out the blower motor and resistor on my 1999 Jeep Wrangler. Afterwards the blend door actuator quit working. I replaced and it still didn't work. Returned product just in case. Promptly received replacement. After replacing the hvac control panel, the actuator worked. All of these elements are easy to replace on your own. Great value, return was easy, and product works as advertised.
Kindle Customer
Reviewed in the United States on October 10, 2024
Found youtube video to help with installation - be aware that the adapter (plastic part) may still be in place when you remove the old controller which will work with this unit.
BD McBentley
Reviewed in the United States on January 7, 2024
It works to adjust my heat temperature. It is louder than the original but seems to adjust fine. Kinda hard to install because of its location under dash but it fit fine.
Bernie Paquette
Reviewed in Canada on January 28, 2021
Showed up but the gears was missing so I couldn’t use it
ron renz
Reviewed in Canada on November 23, 2020
Worked well just like the original one
SMW
Reviewed in Canada on August 20, 2019
I compared this to the original MOPAR/Chrysler actuator and it really is weak. Loosey-goosey tolerances, lots of lash on the gearing and the connecting axle looked a bit frail. I am returning it and going for OEM.
JCBaz
Reviewed in Canada on December 18, 2019
I used this on a Jeep TJ. It functions properly after a bit of tweaking. It didn't line up with the door shaft properly. The door would bottom out before the full travel was reached on the motor, causing the plastic gears to skip. The correction was to elongate the mounting holes to be able to rotate the motor slightly.The construction is cheaper than the original so let's see how long it lasts. I expected more from a Dorman part.
JDub2899
Reviewed in the United States on December 17, 2019
Recently the blend/temperature actuator on my 2004 Wrangler starting making a constant grind/vibration noise when set to full cold, and then every time you would turn it up or down, you could heard grinding noises. I didn't want it to fail in winter and leave me without heat, so I searched out a replacement. The OEM one has been discontinued, so I came upon this one and trusted the Dorman name. Fit was great, and installed in less than 10 minutes. Works well, nor more grinding noise. I do find if the radio is off and I adjust the temperature I can hear the motor in this one more than I could the OEM one, but no where near as loud as the broken one was.
N. Calvert
Reviewed in the United States on October 29, 2019
just as advertised.
Hollywood5
Reviewed in Canada on September 25, 2018
works well and fits
Recommended Products
