Your cart is empty.
Your cart is empty.This engine oil cooler hose assembly matches the fit and function of the original equipment components for reliable repair and restoration of proper oil circulation between the oil cooler and engine. This part is compatible with the following vehicles. Before purchasing, enter your vehicle trim in the garage tool to confirm fitment. [Lexus RX350: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016] - [Lexus RX450h: 2010, 2011, 2012, 2013, 2014, 2015, 2016] - [Toyota Highlander: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019] - [Toyota Sienna: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019] - [Toyota Venza: 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016]
Joshua Ramdial
Reviewed in the United States on August 12, 2024
No leaks great value for the money.
Timothy
Reviewed in Canada on August 1, 2024
It fit perfect for my 2010 Lexus RX350. Nice to have this metal pipe to modified the old PVC type.
Mitchell J. Lopina
Reviewed in the United States on July 30, 2024
Perfect fit, and will eliminate hose failure. Easiest way to install is by removing studs on driver side end, then place gasket and reinstall studs. Messy job, but fairly simple. Tools that will make the job go easy is a 12mm medium length 1/4 drive socket, 1/4 wobble adapter, and a E8(female Torx) socket.
Customer
Reviewed in the United States on May 3, 2024
Decent price and it fits perfectly fine so far so good .
CHRISTOHER BUTT
Reviewed in the United States on May 21, 2024
The pipes are over sized so putting the top bolt on the engine port was impossible. There was no way to get a socket on it and couldn’t use a wrench no matter what you took off to access it.
Tracy Claassen
Reviewed in the United States on June 4, 2022
The rubber oil cooler lines never got replaced under warranty recall on my 2008 lexus rx350. One finally burst, spraying 5 quarts of oil over everything. This part replaces those problematic rubber made ones. Fit and finish are top notch, and all gaskets needed are included.
fabian servin
Reviewed in Mexico on January 20, 2022
Tiene que ponerse de forma específica y falló el empaque inferior, compré empaque original y todo muy bien.
OZER METE
Reviewed in Australia on February 12, 2021
Great stuff
Josh
Reviewed in the United States on December 31, 2019
Blew the original oil cooler line on my 2007 Toyota Sienna. This fits great, but is a little hard to install, since it is metal and not flexible. You have to take out one of the studs with an inverted torx socket. Great product.
Javier
Reviewed in Mexico on November 17, 2019
Buena Calidad y funciono correctamente
Customer
Reviewed in Canada on March 22, 2018
Order it for a friend and was told work out great.
Joy Keener
Reviewed in the United States on August 18, 2017
I am a little sruprised that I found this product on Amazon, but it was the best price I saw on the internet, best shipping option, and it fit my 2007 Toyota Sienna just right. This is an upgrade to the rubber hose oil cooler that the factory installed on the car, because the rubber hoses develope pinhole leaks. We lost all of the oil from the engine one day, because of the rubber hose. Never again!I should point out that one of the mounting nuts is really hard to reach because of the Toyota engine design. I had to buy a 12 mm flex head ratcheting box wrench just for that nut.
Pete B
Reviewed in the United States on June 24, 2017
Positive: 1) obviously, this oil line has no rubber hoses, and will not leak (if installed correctly, which is very difficult); 2) despite extremely difficult installation, it is still possible to properly install this Dorman oil line without removal of catalytic, as long as the right tools are available.Neutral: oil lines are made of rigid metal pipes and are not flexible at all.Negative: 1) the picture shows oil line with 2 gaskets, my order arrived without any gaskets, and they were not available at the auto stores; 2) this particular product has major design issues, which makes the proper installation very difficult. The line on the side of the oil filter curves too close to the stud/nut, making it near impossible to secure the nut. There's the same type of issue present on the other, the oil cooler side: the oil line location making tightening the nut to the specific torque impossible, even with some pretty advanced tools.Conclusion: this product is much better option than the original one, with faulty rubber lines. However, the positioning of the metal lines hinders access to some studs and nuts, making tightening the nuts extremely difficult, which might result in an oil leak at the gasket.Advice for self-installers : 1) I would order this product with return option, and try installing it first. During the installation attempt you will be able to identify design issues, making tightening of two nuts nearly impossible. Then I would compare it to Toyota / Lexus version of the fully metal line, and see which one would be easier to work with. Apparently Toyota already make their own fully metal oil cooler line. Unfortunately, I did not have time to compare this Dorman product to the one made by Toyota.
Recommended Products
$38.59
$ 17 .99 $17.99
$32.50
$ 16 .99 $16.99