Your cart is empty.
Your cart is empty.Product Description
DPP Titanium Mount/Adapter Plate Compatible with Smith & Wesson MP 2.0 Optics Ready/CORE Models
Mount plate is CNC milled from 6AL4V Titanium billet, which has vastly superior mechanical properties to 6061-T6.
- This kit includes everything you need to mount the sight on M2.0 Optics Ready/CORE slide.
- Plug and Play, easy to install, Sturdy and Stable.
- Not fit SW MP M1.0
- Compatible with Smith & Wesson MP M2.0 Optics Ready/CORE Only.
- Compatible with sights: Holosun 407A/C 507C 508T Trijicon RMR/SRO
- Material: 6AL4V Titanium. The screws are SCM435 alloy steel.
Tate
Reviewed in the United States on March 21, 2025
Titanium mounting plate fits well on the M&P 2.0 10mm with Holosun 508T. Bolts/retaining pins align perfectly. Not extremely snug on the slide as others say but the play is extremely minimal. Definitely an upgrade from the plastic mounts that come with the 2.0. (I have not fired the 2.0 with new plate yet).-Comes with Holosun and Trijicon compatible screws (blue loctite), wrench, and an extra metal buffer plate if you prefer to have that between your optic and mounting plate.-Worth the money, arrived at my door 16 hours after I ordered it.
Dadius M
Reviewed in the United States on March 12, 2025
The media could not be loaded.
Brandon
Reviewed in the United States on February 8, 2025
The plate fit perfectly and seems to be made extremely well . The screws sent did not fit the sight depth.
Customer
Reviewed in the United States on January 12, 2025
Good quality
Ziege
Reviewed in the United States on August 21, 2024
I used this to replace the plastic adapter plate that came with the pistol. The OEM plastic plate was loose and flimsy. I would have thought that the people who made the pistol antd the plate would try and have the tolerances close to one another.The DPP titanium plate is this, very rigid, slim and has very tight tolerances. You must line it up just right and still use a bit of force. It fit's perfectly on the pistol and on the sight. The screws are longer than what is provided with the sight and appear better made. I used vibra-tite 122 to secure the screws and torqued it to 15 foot pounds per the red dot sight manufacturer specs.I'm very happy with my purchase.
Vincent Martin
Reviewed in the United States on May 21, 2024
I purchased a Smith & Wesson Performance Center 10mm recently. I mounted a Holosun 407C green dot sight with the corresponding included polymer mount. I put thread locker on the screws from Holosun and torqued them down to the recommended 15 in/lbs. After putting a few hundred rounds through it I saw "decent enough" grouping with my loads. The more I thought about it, the more it bothered me as I expected more from a S&W product. Especially one that came from their Performance Center. I noticed many people complaining about the optic mounts included as not being strong enough and were replacing them. I saw the DPP mount had excellent reviews and decided to order the titanium version.Upon swapping the mounts out I had a few negative surprises. First off, BOTH original screws that I used thread locker on and torqued to specs were loose. Second, when I removed the optic from the mount I noticed one of the two plate alignment lugs were sheared off and embedded into the optic bottom itself. I had to use a very small screw extractor to get the wedged in piece out (pic included).FYI.........many DPP mount buyers stated the included screws marked for HOLOSUN were too long so they used the shorter screws that Holosun included with the optic. THIS IS NOT THE CASE!!! They do in fact seat fully. They come pre dipped in thread locker (pic also included) and they certainly get tighter as they're screwed down but I took them to 15 in/lbs and they were in fact fully tightened and my green dot optic has absolutely no play in it whatsoever. I was fooled originally as well but decided to give it a 2nd try as I couldn't see why DPP would go through the trouble to offer screws marked specifically for a certain product that wouldn't work. I'm glad I gave it another go as the longer threads are an excellent idea for the recoil of the 10mm.I'm looking forward to shooting the PC 10mm with the new plate and i'm expecting nothing but positive results. If I encounter anything negative at all i'll update this review and let everyone know about it.
Miles Juelfs
Reviewed in the United States on November 8, 2024
This was far better than the plastic shims that come with the pistol. It filled both back and front gaps and had the correct mounting lugs for my Holosun 507 ronin comp.
Excellent quality
Reviewed in the United States on November 2, 2024
Used and returned it’s obviousThis is absolutely ridiculous and the one screw is stripped !
Recommended Products