Your cart is empty.
Your cart is empty.Draper Expert Hand Nibbler for Metal Sheet, Plastic.
Customer
Reviewed in the United States on January 20, 2025
Great tool, metal work make it easy! Specially if you can’t use more destructive force to deal with the material
Peter
Reviewed in Sweden on March 7, 2024
Helt ok produkt för hemmafixaren. Fungera som tänkt.
Zorro Loco Machete
Reviewed in the United States on November 24, 2024
Cutting 18 Gauge Aluminum perfectly. I didn't realize when I ordered it shipped from England, but it came very quickly and is a very good quality tool.
Michael O'Nele
Reviewed in the United States on October 14, 2024
Thought about a Nibbler like this for a long time. Used these to cut annealed 16 ounce copper and they work great.
shehab saeed
Reviewed in the United Arab Emirates on September 29, 2022
all good
D D
Reviewed in the United Kingdom on March 29, 2022
In the past I have used a grinder or jigsaw to cut thin sheet metal, this does the same job without the noise, vibration, sparks, flying metal shards/filings and material sliding around if not clamped.It's very handy for cutting small amounts of material and material less than 1mm thick but for prolonged use it would be tough on your hands. There may be a bigger version available more suited to thicker material or long use.I've always found the Draper Expert range of tools to be good quality
Henri
Reviewed in the United States on March 28, 2022
I am in the construction field, and use snips all the time. These cutters cut through black iron (cold rolled steel) like butter. Have to cut straight in though, but they cut
C. Sullivan
Reviewed in the United States on June 1, 2020
The tolerances on this are really sloppy and the edges aren't all the sharp, but it works, and this type of tool is great to have, to make longer cuts in sheet metal while keeping the sheet flat. It's not the one to get if you want a high quality tool, but if you want something that functions OK at a bargain price, it's an acceptable choice.Don't expect the edges to mate well out of the box. I simply squeezed it in a vice to get them to mate better, and it's definitely improved, but not as good as I'd like.
Customer
Reviewed in the United States on August 20, 2019
This tool is a great addition to any sheet metal working tool set. Center nibbler jaw has horizontal splines cut in it to grip the wasted portion of the cut and keep tool engaged with material everytime tool is squeezed making operation precise.
Justin
Reviewed in the United States on June 14, 2019
Handy for getting into tight spaces. Much better than shears in many cases as it doesn't bend your sheet. leaves a pretty nasty edge, pretty standard for a nibbler, but well worth it. Love them!
ultra.kick
Reviewed in Germany on March 11, 2019
Wegen dieser hab ich ihn mir gekauft . Besteht quasi aus einem Amboß mit Schlitz , durch den mittels 'Hammer' ein Streifen abgedrückt (herausgestanzt) wird . Dieser 3mm-Streifen bildet im Schlitz einen langen Kringel . Zurück bleiben zwei saubere Schnitte .Die Konstruktion entspricht also einem professionellen Positiv-Negativ-Stanzwerkzeug . Kein Vergleich zur üblichen Blechschere , die irgendein verbogenes abgenudeltes Blechstück hinterläßt . Dieser Handnibbler ist also eine (Schlitz-) STANZE und kein Schneidwerkzeug ! Er stanzt Blech wie auch Plastik . Mit 0,8mm-Blech sauberer 'Schnitt' , auch Kurvenschnitt . Selbst die Blister-Umverpackung hat er sauber getrennt .Der Handnibbler selbst liegt wegen seiner geringen Größe sehr gut in einer Hand und läßt sich bequem (>geringer Öffnungswinkel & gute Übersetzung) bedienen . Man kann also problemlos mit 2 Händen sehr präzise Stanzvorgänge ausführen . Selbst an vergleichsweise sehr kleinen Stücken (>10mm) . Eine gute Ergänzung für jede Mikro/Mini-Werkstatt .TIP: Man kann auch kurze 'Schnitte' am Rand machen , es entstehen dabei im Blech zwei 'Schnitte' plus eine 3mm-Lasche , die kann man dann umbiegen und so das Blech befestigen. Ausprobieren ...
BLACKHOLEMONSTER
Reviewed in Italy on October 26, 2016
Questo oggetto è surreale.Quando l'ho visto su internet ho pensato che sarebbero stati soldi buttati.Poi l'ho acquistato, con amazon, pensando... va beh, pace, al limite lo restituirò o ci taglierò la plastica....Quando è arrivato non ci potevo credere. Rodeva qualsiasi cosa.Alla fine ho detto: ora valutiamolo seriamente! Ho fatto un buco da trapano nella lamiera di un ARMADIO RACK 19 e ho iniziato a rodere.Lo ha segato come burro, rimanendo perfettamente allineato, perché la testina va in linea retta !Magico.
J
Reviewed in the United States on December 19, 2015
Works well after a little a adjustment of the blade position and gaps.
Recommended Products
