Shopping Cart

Your cart is empty.

Your cart is empty.

E1840P Sloppy Mechanics Stage 2 Camshaft Cam Kit with LS7 Lifter, Spring, Head Gaskets and Bolts Kit for 1997-2007 LS LS1 5.3L 5.7L Engine

5.0 Write Review
Free shipping on orders over $29.99

$428.99

$ 99 .00 $99.00

In Stock

About this item

  • PACKAGE INCLUDE: Cam and lifter kit include 1 intake seal set, 1 timing cover gasket set, 1 valley cover gasket, 1 oil pan gasket, 2 exhaust manifold gaskets, 1 rear main seal, 1 rear main cover gasket, 2 multilayer steel cylinder head gaskets, 30 cylinder head bolts, 16 ls7 valve lifters, 16 beehive valve springs, 1 e-1840-p camshaft
  • FITMENT: E1840P camshaft kit fit for 1997-2007 GM Chevy LS L92 L99 5.3L 5.7L V8 LSx Sloppy Stage 2
  • CAM SPECS: 2200 to 5400 rpm; intake valve lift: .585"; exhaust valve lift: .585"; advertised intake duration: 283°; advertised exhaust duration: 286°; intake duration at .050": 228°; exhaust duration at .050": 230°; lobe separation: 112°; intake centerline: 108°; cam gear attachment: 3-bolt
  • 16pcs valve springs: outside diameter of outer spring (in): 1.290 in; inside diameter of outer spring (in): 0.885 in; spring coil bind height (in): 1.140 in; install load: 130lbs; install height: 1.800"; open height: 1.175"; open load: 318 lbs; rate (lbs/in): 313 lbs./in.
  • NOTE: Professional installation is recommended


Product Description

For GM Chevy 1997-2007 LS LS1 5.3L 5.7L V8 Sloppy Stage 2

sloppy stage 2 camshaft kit

camshaft lifter spring bolt

Cam and lifter kit include:

  • 30 x Cylinder Head Bolts
  • 16 x Valve Lifters
  • 16 x Beehive Springs
  • 1 x E-1840-P Camshaft

gasket kit

Gasket set include:

  • 1 x Intake Seal Set
  • 1 x Timing Cover Gasket Set
  • 1 x Rear Main Seal
  • 1 x Rear Main Cover Gasket

gasket kit

Head gasket kit include:

  • 2 x Multilayer Steel Cylinder Head Gaskets
  • 2 x Exhaust Manifold Gaskets
  • 1 x Oil Pan Gasket
  • 1 x Valley Cover Gasket
sloppy stage 2 cam specs

E-1840-P Camshaft Specs:

  • Camshaft RPM Range: 2200 to 5400 RPM
  • Camshaft Intake Valve Lift: .585"
  • Camshaft Exhaust Valve Lift: .585"
  • Camshaft Advertised Intake Duration: 283°
  • Camshaft Advertised Exhaust Duration: 286°
  • Camshaft Intake Duration at .050": 228°
  • Camshaft Exhaust Duration at .050": 230°
  • Camshaft Lobe Separation: 112°
  • Camshaft Intake Centerline: 108°
  • Camshaft Cam Gear Attachment: 3-Bolt
valve springs

Beehive Valve Spring:

  • Number of Springs Per Valve: Single
  • Outside Diameter of Outer Spring (in): 1.290 in.
  • Spring Coil Bind Height (in): 1.140 in.
  • Damper Spring Included: No
  • Spring Install Load: 130lbs
  • Spring Install Height: 1.800"
  • Spring Open Height: 1.175"
  • Spring Open Load: 318 lbs
  • Spring Rate (lbs/in): 313 lbs./in.
  • Inside Diameter of Outer Spring (in): 0.885 in.
when do you need to replace your camshaft