Your cart is empty.
Your cart is empty.Product Description
When your job calls for split second coordination, look to Eartec UltraLITE self contained headsets for hands-free, full duplex wireless voice contact. These replacement headsets can be paired to an existing UltraLITE HD system, whether you need a replacement or an additional headset.
Pair a Remote Headset to a Main Headset
-
Step 1: Clear Main Headset
When programming a new unit, the Main headset needs to be cleared before a Remote UltraLite can be paired.
- Install the battery in Main and turn power switch to "ON."
- Press and hold programming button on the Main headset for 5 seconds. The LED will begin flashing blue/red.
- Press the programming button 7 time. The LED will begin to blink blue. The Main headset is now cleared and is ready to be paired to a Remote headset.
-
Step 2: Pair Remote Headset
The main headset is now ready to have the first Remote headset paired to it:
- Install battery in “Remote” UltraLITE headset
- Press and hold programming button (Blue LED) on “Main” headset for five seconds. LED will begin flashing blue/red. This indicates that the “Main” is ready to link to a “Remote” UltraLite headset.
- On the “Remote” UltraLite, press the volume DOWN arrow 3 times and then press and HOLD the volume UP arrow. Once the LED on the remote flashes’ red/blue, release the volume UP arrow.
-
Step 3: Allow Units to Link
The pairing process can take from 5-30 seconds. When the Main unit links to the Remote, the LED will flash twice quickly and then turn solid blue. The Main headset will go from a flashing LED to a solid LED. When both LEDs are solid blue, the units are linked together.
*Each “Main” headset can have a maximum of 4 remote UltraLite paired.
-
To Program Additional UltraLITE
To program additional UltraLite, press and hold the programming button on the “Main” for five seconds until the blue LED begins flashing blue/red then repeat steps 2 and 3 for each headset to be linked to the main.
*Each Main headset can have a maximum of 4 remote UltraLite paired.
Pair a Remote Headset to a HUB
-
Step 1A: Clearing the HUB
When programming new headset to a HUB mini-base, the HUB needs to be CLEARED before a remote unit can be linked. All remote units should be OFF before starting this process.
-
Step 1B: Clearing the HUB
Press and hold programming button 1 on the HUB for five seconds. The red LED will begin flashing. Then press the #1 programming button 7 times. The red LED will turn off. The HUB now has no remotes programmed to channel 1.
Press and hold programming button 2 on the HUB for five seconds. The red LED will begin flashing. Press the #2 programming button 7 times. The red LED will turn off. The HUB now has no remotes programmed to channel 2.
-
Step 2: Pair Remote Headset
The HUB is now ready to link to Remote UltraLite headsets.
- Insert batteries in each Remote and power them ON. Press & hold programming button 1 (to program channel 1) or 2 (to program channel 1) on HUB for 5 seconds. The Red LED will flash. This indicates that the HUB is ready to link to a Remote UltraLite.
- To program a Remote UltraLite, press the volume Down arrow 3 times and then press and HOLD the volume UP arrow. Once the LED on the Remote unit flashes blue/red, release the volume UP arrow.
-
Step 3: Allow Units to Link
The pairing process can take from 5-30 seconds. Once the UltraLite links, the LED will turn solid blue. The HUB will turn from a flashing LED to a solid red LED. When both LEDs are solid, the UltraLites are paired to the HUB.
To program additional Remote UltraLite to the HUB, repeat steps 2 and 3 for each remaining unit.
*The HUB can have a maximum of 8 Remote UltraLite paired.
AMA FAN
Reviewed in the United States on May 6, 2024
We use these on our boat so we can hear each other - I have 5 allConnected together so crew and guests can hear - excellent product and service
Maira Santiago
Reviewed in the United States on March 14, 2024
Un artículo muy útil para mi día a día laboral. Claridez en la audición. Sin desperdicio👍
JAMES M NOGUEIRA
Reviewed in the United States on October 30, 2024
Very good product and price.
.....
Reviewed in the United States on August 5, 2023
I have been using Eartech gear for a long time. These particular headsets really work well for the money. I have used these in tough environments for three years now and they have worked flawlessly. Only odd thing to know is that the remote turns itself on when you put in the battery which is odd and can be problematic for battery life.
S. D.
Reviewed in the United States on November 24, 2023
We purchased a set of these for use on our boat. They have come in particularly handy while docking. A really helpful tool to make sure everyone involved on the boat knows what's going on. We decided to add a third headset so our kids could help out with docking, too. We all have either larger hat sizes or thick hair, and the headsets fit very comfortably. But if you have a small hat size, you might want to wear a baseball cap or knit cap while using this to keep it from sliding.
Recommended Products