Your cart is empty.
Your cart is empty.Raspberry pi 4 heatsink fan kit, includes 1 piece raspberry pi quite 30mm 3.3-5V DC fan and 3 pieces aluminum+ 1 piece copper cooling heat sink set for Raspberry Pi models A, B, B+, 2, 3, 3 B+ and pi 4B boards. These pure aluminum (2 pcs) and copper (1 pc) heatsink include heat conductive adhesive tape for optimum heat transfer. These heat sinks have profiles which are short enough to fit within standard Raspberry Pi cases. These heat sinks kit can be applied in other devices to cool processor, voltage regulators, VRAM VGA RAM, small IC Chips, MOSFET SCR, Southbridge, Northbridge etc. Package includes: 1pc 30x30x7mm quite 5v DC fan + 1pc aluminum heatsink: 0.56 x 0.56 x 0.31 inch (14mm x 14mm x 7mm) (L*W*H); 1pc aluminum heat sink: 0.56 x 0.39 x 0.27 inch (14mm x 10mm x 7mm) (L*W*H); 1pc aluminum small heat sink: 0.35 x 0.35 x 0.19 inch (8.8mm x 8.8mm x 5mm) (L*W*H); 1pc copper pad shim heat sink: 0.59 x 0.59 x 0.02 inch (15mm x 15mm x 0.5mm) (L*W*H)
Psx_Specter
Reviewed in the United States on June 29, 2024
Previously left a bad review because I didn't check inside the box and count the parts.Everything works fine.
評価さぼる人
Reviewed in Japan on February 22, 2024
キットに付属していたファンが最初は静音でしたが、１か月ほどでキーン音を出すようになったので交換するために購入しました5Vで使用していますが静音です接続用のピンが個別になっているので、3.3Vでも使用出るようになっているのも良い点かなと思います
Customer_1
Reviewed in Saudi Arabia on May 29, 2023
Did not receive the heat sinks. Only received the fan. Very disappointed.
G. Book
Reviewed in the United States on May 20, 2022
I use my raspberry pi in a greenhouse, so keeping it from overheating was important. The heat sinks and the fan reduced the temperature of the CPU by about 10C, which is pretty amazing. The only reason i gave 4 stars was because the fan started making noise after a month.
Smokey the Bear
Reviewed in the United States on October 8, 2022
There are no instructions so I took pictures of how I installed the heat sinks. I looked up the pin out and installed the fan according to the correct pins (5v and ground). The pi was running ubuntu 22.04 with a steady temp of 62c before which is definitely on the high end for no load. Now with heatsinks and in a case it's at 48c.
Scott1970
Reviewed in the United States on February 23, 2021
Great unit for the money. Easy to mount and works flawlessly.
Daryl K.
Reviewed in the United States on February 18, 2021
I downloaded two images from orangepi website. Ubuntu server and debian. One of the 5 boards I bought actually booted to ubuntu-server. I was able to get in through ssh. The rest of the boards didnt boot and locked up with solid lights on ethernet port and no red light flashing on front while booting.Once dialed in to ubuntu-server "apt-get update: would not finish and resulted in a number of python centric errors coming from a file in /usr/lib. It looks like orangepi devs chained this file to apt-get update function. But on release they didnt include the needed python packages to support. I went to install pi-hole and that scrip errored saying we cant refresh packages. I was able to run apt-get upgrade curiously but it did not clean up any errors that dealy with upgrade. So one out of 5 of these boards booted up to the point of plugging in a fan to the fan header. The fan was a 5v fan but since doing this the board will no longer boot. I wasnt able to get debian image to boot either, on any of the boards. I think I killed the one working board by plugging in a fan. The schematic on the orangepi site shows a fan header..... Based on what I see with both error filled software images that werew not built correctly and hardware that does not work I would avoid this project.
American in Paris
Reviewed in the United States on July 6, 2020
I used this to cool my custom laser-cut + 3D-printed Raspberry Pi case. It keeps this very cool, and it doesn't seem noisy. The heat sinks stick well. With a pack of four, I can make more cases!
Pellegrin
Reviewed in France on May 9, 2020
Le compagnon ideal de mon raspery. Mon raspberry chauffait en visionant un film en full hd. Maintenant tout va bien et en silence. Le ventilo est silencieux et suffisament fin pour entrer dans la boite. Il fait un peut bricoler pour l installer mais ca va. J ai fait des trous en plus dans le boitier pour la circulation de l air.
Ilario
Reviewed in Italy on November 23, 2020
Ottimo prodotto. Ventola silenziosa. I dissipatori aderiscono perfettamente sui chip. Consigliatissimo. Fare solo attenzione ai cavi della ventola perché non sono completamente flessibili.
Smax
Reviewed in France on January 26, 2020
Conforme à la description a voir la fiabilité avec le temps
Customer
Reviewed in the United States on September 30, 2019
I set up a Pi3 as a media streamer and it began overheating after about 20 min of streaming 1080 video. I got this fan, cut out a hole in the pi case, and mounted on the inside of the case. I oriented it to pull hot air out of the case, and drilled some holes on the side of the case so cool air would be pulled over the board. Since installing, the pi has not overheated once. It barely feels warm.
pencilpusher
Reviewed in the United States on December 7, 2019
I use them in Raspberry Pi cases. Perfect size and appears to do the job. Here's some test results on an RPi 3B+ mounted in a 3D printed enclosure. Used "vcgencmd measure_temp" to read the CPU core temperature. Does a nice job.Room Temp 26.0°COpen Case, no fan 52.1°CClosed case, no fan 53.1°CClosed Case, with fan 40.8°C
Recommended Products
