Your cart is empty.
Your cart is empty.Product Description
High measurement accuracy: Due to the contact of the thermocouple contact with the subject, it is not affected by the intermediate medium.
Response time measurement: The thermal response time of the K-type thermocouple is actually more complicated. Different experimental conditions produce different measurement results, which is due to the heat exchange rate of the surrounding medium, high heat transfer rate, heat The response time is short.
The thermocouple is used as a temperature measuring sensor usually uses a constituent control system with a temperature transmitter, a regulator, and a display instrument, to directly measure or control fluid, steam and gas medium in the range of 0-1300 ° C in various production processes. And the temperature of the solid surface is equal.
The thermocouple has many advantages such as bending, high pressure, thermal response time and rugged and rugged, as in the industrial assembly thermocouple, as a sensor of measuring temperature, usually and display meter, record meter, and electronic regulator.
Use range: Widely used in large furnace temperature detection, high temperature furnace kiln, aviation sector, precision cast, metal smelting, etc.
Thomas Dahl
Reviewed in the United States on January 11, 2025
Less the 3000 miles and they are leaking exhaust.
Rémy B.
Reviewed in the United States on September 18, 2024
Product meets the decent quality
Steve
Reviewed in the United States on November 4, 2024
Works for my motorsports innovation EGT for my dragster.
karl Simard
Reviewed in Canada on January 29, 2024
Pour remplacer ma sonde de temperature de muffler skidoo summit 2013 qui vos 500$.
Doesn’t work properly
Reviewed in Canada on January 22, 2024
Didn’t work within temp range , got it up to 800F and was mounted in direct airstream and started bouncing and reading sporadically. Mounted on a 2000 Jetta alh tdi . Test your luck maybe you’ll get a good one
mike boardman
Reviewed in Canada on August 9, 2023
Says it's 1/8npt, but it didn't screw into my manifold. Reused my old sensors hardware for it to work. Didn't need to calibrate it on my smarty touch. Was already 0.4°F off, which is fine for me. Let's see how long it lasts. The one on my smarty touch was only 3 years old before failing. Overall I'm happy for now. Will update if/when it fails.
zachary horsley
Reviewed in the United States on June 25, 2023
Works just like the factory SCT probe. Allot scepter than replays I h the whole kit
Handlebar Junkie
Reviewed in the United States on May 15, 2023
Works great, pretty accurate and easy to splice in to existing wiring. Only problem is it is just shy of the standard 1/8 npt standard for EGT probes. Had to use some JB weld extreme heat to fill the gap as I got exhaust leaks. Overall not perfect but you can make it work.
Ian C.
Reviewed in Canada on February 25, 2023
I did not receive the original item, so the seller sent a new one very quickly and easily. Product is what i was looking for.
Jeremy
Reviewed in the United States on June 25, 2022
Made in china, but seems of ok quality. Replaced my probe on my sct 9817 with sct livewire ts+ On my 6.0 powerstroke. Haven’t ran the truck yet, but reads room temp with engine off and passed the lighter test.
Thurston
Reviewed in the United States on March 10, 2022
Had to cut and splice connectors to work but was expecting to do that. Worked with Isspro egt gauge.
Trystan Bartlett
Reviewed in Canada on March 14, 2021
Quality braiding and sensor. I used this probe to connect to my sct tuner on my truck to monitor exhaust gas temps. (you need an adapter from this to the sct) but over all good price. this was also the longest one i could find
Customer
Reviewed in the United States on February 26, 2021
This will work if your looking to replace a EAS get thermocouple. You will have to splice it into the plug and find a new fitting. I got the fitting from Lowe’s but I am sure Home Depot has it too. After that it work as advertised.
Recommended Products