Your cart is empty.
Your cart is empty. This is a throttle that can display speed and mileage,
suitable for most brushless controllers and has a wide range of applications.
The voltage is 36V 48V 60V 72V Universal, which can be set according to the buyer's needs.
(First press and hold the M-key, then turn the key to start the machine,
then long press and hold the M-key until the voltage parameter flashes,
then short press and hold the M-key to switch the voltage until the desired voltage is reached,
then long press and hold the M-key until P02 flashes, then shut down and save the parameter settings.)
The throttle line 150cm, hole diameter 22mm.
1.phase speed（or connect to LCD instrument cabler）
2.key lock（or call electric lock,electric door lock）
3.throttle
how to connect this throttle?
1.hall speed is connect to controller Pointer meter or hall wires，
2.key lock is connect to controller key lock （or name call electric lock,electric door lock）
3.throttle is connect to controller throttle wires,need color to color connect
if throttle interface not match controller interface，need cut off interface to connect.this need buyer DIY it.
Guidelines for setting LCD instrument parameters:
Press and hold the M key to turn on the power and enter the parameter setting mode:
"Short press the M key to quickly switch to the upper row of P characters,
first displaying P01 in descending order; * Long press the M key for more than 3 seconds,
the lower row of numbers will flash, and then short press the M key to change the parameters, Hold for 5 seconds to save the current parameters.
Code:
P01 can be set to 36V, 48V.60V, 72V voltage, with a default value of 48V
P02 can be set from 10 to 150, with a default of 100
P03 can be set to 90-130, with a default of 100
P04 can set the speed measurement mode, where 0001 represents phase speed testing and 0002 represents hall speed testing
P05 can set wheel diameters of 8,10,12,14,16,18,20,22,24,26,28,29, with a default of 14 inches
P06 can set the number of magnetic steel from 1 to 99, with a default of 30
P07 can set the battery voltage display coefficient to 95-105, with a default value of 100
P08 can be set with three gear functions: P08=0 without gear, P08=1 defaults to first gear,
P08=2 defaults to second gear, and P08=3 defaults to third gear Default is 0
P09 mileage reset: After entering the parameters, long press for 3 seconds, the mileage flashes, and short press 10 times
Switch between P10 kilometers and miles, with 0001 representing kilometers and 0002 representing miles
Michael Connors
Reviewed in the United States on August 25, 2024
I was sceptical of what I would get for barely $20, but the build quality is solid, quick connect adaptors fit most universal applications and it works great !
juan nicolas
Reviewed in the United States on June 17, 2024
Buen precio y es de calidad
Carl Lyons
Reviewed in the United States on March 8, 2024
I bought this for my 72v stealth bomber clone and it works great.simple to install.good value and seems to be a solid build.
Wendy Scandrett
Reviewed in the United States on March 18, 2024
I know the throttle wires but where do the Yellowcard white go I assume the power and blue is to the data line
Jimmjames
Reviewed in the United States on October 21, 2024
Make sure you get the one that matches your control box wires other wise your cutting wires and guessing witch wire it goes on from the box wires because the box wires are nit marked if they are its in chinese and after you translate them its so misleading
Customer
Reviewed in the United States on January 15, 2024
The media could not be loaded.
Cubanito813
Reviewed in the United States on April 5, 2024
Is funcional but is not smooth on acceleration . And also never can changed to miles . I try all it keep showing km
Crane yard
Reviewed in the United States on April 10, 2024
Can’t turn the screen offCan’t adjust parametersNot a smooth acceleration
Recommended Products
