Your cart is empty.
Your cart is empty.Product Description
Magnetic Door Lock with Z and L Bracket 600LBS 280KG Holding Force 5 Wire Signal Output LED Indicator
Features:
- This magnetic door lock provides a holding force of 600lb (280KG).
- High strength aluminum alloy material.
- It consists of an electromagnet and an armature plate used for access control door locks.
- Attach this electromagnet lock to the door frame and the armature plate to the door.
- When a current passing through the electromagnet, it attracts the plate and holds the door lock shut.
- This Lock has Signal Output Design, NO/NC/COM output for detecting the lock status.
- It has LED on the body to indicate the lock Status. Red LED shows unlocked and Green LED shows locked.
- NC mode (fail safe), the door will be closed when power is on; when power off, the door will open.
- It is suitable for wooden door, glass door, metal door, fire-proof door, etc.
- With Z and L bracket included in the package, you can install the lock more conveniently.
Magnetic Lock
Electromagnetic Material: Aluminum Alloy
Armature Plate Material: Electrician pure iron
Holding Force: 600LBS/280KG
Input Voltage: DC 12V
Input Contact: V+/V-
Output Contact: NO/NC/COM
LED Indicator: Red unlocked, Green Locked
Lock Size: 9.84Lx1.93Wx0.98H(in)
Armature plate: 7.09L x 1.50W x 0.43H (in)
Package Weight: Approx. 4.0lb (1.78KG)
Z and L Bracket:
Specification of Z and L Bracket:
Material: High strength aluminum, sandblast finished.
Opening Mode: 90 degree door.
Suitable for Door: Wooden and metal door.
Suitable for Lock: Electromagnetic lock series of 600lb (280KG) holding force.
Easy to install and convenient to use.
Package Weight: 0.60KG/ 1.33 pounds.
Package list:
Package List of Magnetic Lock:
1 * Electromagnetic Lock
1 * Armature Plate
1 * Screws Pack
1 * English User Manual
Package List of Z and L Bracket:
2 * "Z" Style Bracket
1 * "L" Style Bracket
1 * Screws Pack
Note:
- Unscrew the screw on the front cover plate with a universal screwdriver
- Unscrew the 2 black screws in both ends of the lock body by the hex screwdriver
- Loosen the 4 screws in the 4 holes at the bottom of the lock by the hex screwdriver
- Separate the lock and remove bracket (no longer needed)
- L Bracket- For outward opening door
When the door frame thickness is less than 42mm (1.65 inch), L bracket is needed.
- ZL Bracket- For inward opening door
For inward opening door, ZL bracket is needed.
Attention:
- Do not fix the screw of the armature plate too tight as this will result in weak suction of the lock. Please loosen the screw a little bit.
- Proper elasticity should be guaranteed for the rubber ring so that the armature plate can adjust itself to the appropriate position.
- Please keep the surface of the lock clean and make sure the armature plate and lock body perfectly aligned to get the best holding force.