Your cart is empty.
Your cart is empty.Product Description
Technical Data
- Total mileage: 0-999999Miles
- Working Voltage: 12V/24V
- Working Current: ≤100mA
- OverSpeed Buzzer Alarm: Value Adjustable
- Indication light: LEFT, HIGH BEAM, RIGHT
- Working temperatures: - 40 to 85°C
- Operation mode: LCD display, stepper motor
Easy to install.
- Cut an 85mm (3 3/8") hole in the panel and allow a clearance of 55mm (2 3/16”) behind the panel to fit the gauge.
- Put the gauge in the hole and screw down.
- For the GPS antenna, you should securely fasten it in the flat position, black side upwards, preferably outside (or inside front windscreen)
so that it has a clear view of the sky to pick up satellite signal. Connect the antenna cable to socket in the back of the gauge. And do not cut cable.
Product Introduction
How to connect wires?
1. black wire—Power Negative.
2. Red—Power Positive (12V/24V).
3. White—External Button (+)
4. Red—Backlight (+)
5. Yellow—Backlight (+)
6. Blue—Left Turn (+)
7. Green—Right Turn (+)
8. White—High Beam (+)
GPS Speedometer keeps counting?
- After installation in the first time, GPS speedometer needs to search for signal, that's the reason that LCD counts numbers all the time.
- After getting signal, LCD will come back to 0. It is normal.
Package Includes:
1x GPS Speedometer
1x GPS Antenna
1x multi-plug socket
1x External Button
1x Installation Instruction
Ejaaz
Reviewed in the United States on February 2, 2023
Good
Recommended Products