Your cart is empty.
Your cart is empty.Product Description
Why detecting leaks in the automotive EVAP system is suggested?
With the implementation of international emission standards represented by CARB LEV III and EURO 6 and the requirement of an on-board diagnostic system, it is necessary for vehicles to have an on-board diagnostic function for small leakage (referring to 0.5mm or 1mm aperture) emission of EVAP system. Compared to cars without on-board diagnostic requirements, the frequency of EVAP system leak alarms will increase, so there will be a corresponding increase in demand for owners to enter service stations for EVAP system leak detection. For the special service stations of vehicle companies, a professional EVAP leak inspection and special tools or equipment for locating leak points are highly recommended, and our AUTOOL SDT 103 Automotive EVAP Leak Detector is a perfect tool for EVAP system inspection and repair.
Why do customers need AUTOOL SDT103 automotive smoke machine?
The AUTOOL SDT103 Automotive Smoke Leak Detector can assist service technicians in leak detection testing. The AUTOOL SDT103 Automotive Smoke Leak Detector can assist service technicians in leak detection testing. Leak detection is the most basic but absolutely essential test in the automotive repair process. The SDT 103 Automotive Smoke Leak Detector is capable of outputting a constant standard test pressure of 32 mbar required by automotive EVAP systems through precise pressure regulation of the external air source, which can output smoke within seconds and can find leak holes as small as 0.5mm.
Why Choose AUTOOL Automotive Battery System Tester Series?
AUTOOL Automotive Battery System Tester Series are specialized auxiliary measurement instrument designed for measuring the actual cold cranking amps (CCA) and the health status of automotive starting batteries. Independently researched and developed by AUTOOL, BT360 have a number of intellectual property rights, as well as the authoritative certification of CE, FCC, ROHS and other testing organizations.
This series of products features four key testing modes: Quick Test, Standard Test, Starting Test, and Charging Test. It offers functions such as numerical display and embedded standard battery testing parameter ranges. These features provide a more convenient and precise measurement method and reference data for monitoring parameters such as voltage and resistance in automotive starting and charging systems. It help technicians quickly diagnose common faults in automotive starting and charging systems, enabling them to accurately and swiftly identify the location of vehicle issues, which facilitates faster repairs.
AUTOOL BT360 is an automotive battery tester used in the field of automotive maintenance and diagnostics, featuring multiple functions and design characteristics. It employs advanced conductance testing technology to assess various aspects of battery performance, including voltage, charge, and lifespan. Additionally, it includes built-in standard battery testing parameter ranges, facilitating the analysis and comparison of relevant data for technicians.
Additionally, the new AUTOOL BT360 adds black color to the original model's appearance, forming a black and yellow color blend, which is fashionable and dirt-resistant. It also includes a software upgrade function, allowing for continuous performance optimization and enhanced vehicle reliability and safety through real-time software updates, further ensuring the smooth operation of your vehicle.
TEST STANDARD PARAMETERS
Test Standard
CCA: Cold Cranking Amps:20~2000 BCl: Battery Council International:20~2000
CA: Cranking Amps:20~2000 MCA: Marine Cranking Amps:20~2000
DIN: German Auto Industry Committee:20~2000 lEC: Internal Electrical Technical Commission:20~2000
EN: European Automobile Industry Association:20~2000
SAE: Society of Automotive Engineers:20~2000
GB: China National Standard:2-300AH
JlS: Japan Industrial Standard:26A17-N200Z
Easy to use & High efficiency
AUTOOL SDT103 model is easy to operate. It can help you quickly and accurately find if a failure is caused by a plumbing leak, even the smallest leaks can be detected. Moreover, it can output smoke within a few seconds, significantly improving diagnostic efficiency.
Visual flow meter and adjustable knob
Smoke output flow: up to 10 L/min. The amount of smoke output can be controlled through the flow meter and adjustable knob, which makes it easy to observe and operate.
Overheating and antifreeze protection
Our smoke leak detector is equipped with the latest intelligent protection devices. The equipment will be shut down for 5 minutes of continuous operation, and it needs to press the button again to restart it, so as to ensure the safety of the operator and the equipment. Our device is also suitable for low temperature operation.
How to do leak detection?
1.Fill 10ml-20ml test oil into the smoke leak detector.Disconnect the car pipelines that need to be connected to the smoke leak detector.
2.Connect the adapted quick interface to the automobile pipeline that needs to be tested.Connect an external air supply to the air inlet of the smoke leak detector.
3. Connect the smoke leak detector to the DC12V battery, and the device starts to work.Turn on the smoke switch, and smoke will be generated in about 5 seconds.
4. Connecting to the detected vehicle pipeline will soon be filled with smoke, which is convenient for locating the leak point.
Wide Range of Applications
AUTOOL SDT103 Car Smoke Leak Detector is a professional auto pipe leak detect tool and without air pump.It will help us position cars motorcycles leakage on pipe system quickly and exactly,is used to detect leaks in piping systems in automobiles, motorcycles, snowmobiles, ATVs, ATVs, light trucks and speed boats, suitable for all models(only for 12v DC). For non-professionals, many users may worry about its utility value because they do not use it very often and maybe only once for a long time, so is it worth spending so much money? Yes, you can also use it for your friends or neighbors, or even rent it out to earn extra income.
Packing list
1pc * AUTOOL SDT103 Main Unit
1pc * Power cord clip
1pc * Valve Core Wrench
1pc * Test Oil Refill Bottle(Oil not included)
1pc * EVAP test interface adapter
1pc * Smoke Hose
1pc * Instruction Manual
Wide range of applications and multiple testing standards
The device has a voltage detection range of 8 to 30V, making it suitable for testing batteries in cars, trucks, motorcycles, and other vehicles. It can test all types of automotive starting lead-acid batteries, including AGM flat plate batteries, AGM spiral wound batteries, and GEL gel batteries.
Multiple testing functions, newly added voltage waveform graph function
Four major testing modes: Battery testing, starting testing, charging testing, and load testing. It can check voltage, resistance, and battery life. Users simply need to connect the clamps, select the appropriate testing mode to quickly and easily obtain test results.
Reverse polarity protection
The device is equipped with reverse polarity protection which safeguards both the device and the battery from damage in case of incorrect positive and negative terminal connections.
Intuitive and convenient data display
Equipped with a dot matrix screen, it offers more diverse information and clearer display effects. After testing, the system directly shows the battery performance test results, including specific values for battery capacity, life, and resistance. This allows even beginners to quickly assess the battery's condition.
Software Update
Software updates can be performed by connecting the device to a computer via a TYPE-C data cable of BT360, allowing for continuous performance optimization, timely system bug fixes, and an enhanced user experience.
Packing list
1pc * AUTOOL bt360 Main Unit
1pc * Instruction Manual
$75.99
$ 34 .99 $34.99