Your cart is empty.
Your cart is empty.Remarks Not a replacement for SSC 72 or Detmar cables (to replace SSC 72, SA27620P adapter is required) Locate the part number printed on the cable sheath on the existing cable and match to SSC 62 14. Older Teleflex rotators that are not Quick Connect (QC) may require the SA27620P QC adapter. If replacing an existing cable that does not have a part number, make sure the distance from the rudder connector to the end of the stainless steel shaft of the connecting arm is 14 foot.
Richard Jarvis
Reviewed in the United States on March 5, 2025
Excellent cable, fit perfectly. Steering is now nice and smooth. When installing on a catamaran, you use two, one longer than the other. Both I used worked great. The instructions are a bit confusing, so all I did was load both cables into the helm spindle, set them at half travel for each (checking the measured length of the end connecting to the rudder end of the cable), and then routed them through the hull to be installed on the rudders. Worked very well, so smooth I can move both rudders on the wheel with one finger.
Customer
Reviewed in the United States on July 4, 2024
Worked like a charm!
Gina
Reviewed in the United States on March 31, 2024
Installed by a licensed mechanic and failed immediately. This could cause serious injury, death, or property damage. Do not install unless you want to loose money or get into a serious accident.
Recommended Products
$13.99
$ 6 .99 $6.99
$131.00
$ 56 .99 $56.99