Chris Murphy
Reviewed in the United States on February 21, 2025
My KRK Rokit 5s fit perfectly. Very solid mounts. Pretty easy to put together. I can set things like notebooks or an iPad on top of the speakers without worrying about it dropping.
dbdean
Reviewed in the United States on January 6, 2025
When mounting my speakers, I was seeking a solution capable of supporting significant weight. My powered monitor speakers each weigh 15 pounds, and these mounts handle the load effortlessly. The only modification I made was adding a strip of Velcro to the rear of each speaker to prevent them from tipping forward in the event of an earthquake. As shown in the photos, I routed the Velcro over the speakers and beneath the horizontal mounting arm. This setup does not interfere with the speakers' rotation.Typically, I wouldn't be concerned about the speakers falling off the mounts, as the rubber pads and the clamping force from the front supports secure the speakers effectively. Additionally, I was not willing to drill holes into my speakers for mounting screws, which made this solution even more appealing.Considering the price and quality, I believe this was an excellent purchase.
Seet Henry
Reviewed in Singapore on January 5, 2025
Very practical way to position the powered bookshelf speakers. Very sturdy with easy installation and adjustable to fit.
Lee G.
Reviewed in Canada on January 20, 2025
These are very well made and easy to install. They hold the speakers firmly in place
Gaby Tome
Reviewed in Mexico on September 8, 2024
Facil de instalar, de buena calidad
Rich
Reviewed in the United States on June 1, 2024
As someone in the building trades it is refreshing to come across a product that is well thought out. Simple to install and attention to detail. The fact that they gave small pads to protect the sides of the speakers was a nice touch. Price point was right on, especially for a product well built with no issues.
William C. Julyan
Reviewed in the United States on December 12, 2024
I was looking for wall-mount brackets to hold my B&W 707 speakers, which are rather deep and rather heavy. These work well. I attached each to a stud and they seem very solid and sturdy.
Jack E Glagowski
Reviewed in the United States on November 7, 2024
Just received these today and reviewed the package content. Everything was packaged nicely and directions are pretty easy to follow. I was impressed with how well they were made for the price. My goal was to elevate a set of paradigm 100B bookshelf speakers so they could be used as either a wide or Height 1 channel. I wanted to be able to better aim the speaker output at my listening position for better sound effect. I’m certain that these are sturdy enough to accomplish that task. I read a few of the one star reviews which mentioned the plastic cover plates not securing. After looking at the construction of the plates I found that there are a couple of small plastic stand offs on the rear of the plastic that need to be popped into some small holes on the metal bracket. If these stand offs are lined up correctly and the correct amount of pressure is applied the plastic should secure nicely to the bracket. There are also two screws that allow you to tighten the clamps onto the sides of rack speaker. The supplied pads should adequately protect the speakers in the event you don’t want to screw into your actual speakers through the holes in the brackets. That being said, depending on how and where you are using the brackets you may to actually screw the mounts to your speakers for added safety. Velcro or some other securing process might also be possible. Overall I’m happy I bought these.
Jluis
Reviewed in Mexico on October 30, 2024
Los compre para unos pequeños monitores de audio y se ven excelentes, también son adaptables por lo que cuando cambie de bocinas aun puedo usar el estante
Customer
Reviewed in the United States on October 1, 2024
Use these for my rear surround speakers in my home theater. They each hold a smaller bookshelf speaker. They are secure and hold the speaker very tight. Very inconspicuous on the wall. Would definitely buy again!
MrSuave
Reviewed in the United States on November 9, 2023
Overall rating is SATISFACTORY (got this for $29.99 SRP)+ Sturdy L-bracket with 3-main holes vertically aligned for wall mounting, there are extra/optional holes should your need arise+ Powder coated metal looks professional, the shiny plastic cover fit snugly+ Instruction manual includes step-by-step assembly and mounting instruction - visuals helped a lot (technical skills needed for a secure installation)* image shows the BOSE 4.2 series II (w/c is 11inch wide and 10inch deep installed vertically, towed in and tilted down @about 20+lbs)- I used Dynabolt for a more secure mounting on a concrete wall (the supplied tox and screws would suffice for smaller/light-weight speakers)- Left & Right clamps are wobbly and needed to be secured by rotating the screw very tightly (specially if the speaker is tilted downward)
St8kout
Reviewed in the United States on January 8, 2023
Just finished installing. It's holding up a Yamaha HS8 which is half the weight limit rating. (I could have sworn the max was 66 lbs but now it says 55 lbs; but no matter as I'm within the limits.I looked at all the various mounts and had to laugh at the short wide base mounts. The majority will be mounting it on wall studs, which are only 1-1/2 inch wide, D'uh. The design of THIS mount is way more logical than a wide mount. Btw, instead of using a "stud finder" gimmick, get some small "supermagnets" one for each nail head vertically; they'll stay put. Then you'll get a much clearer picture of the wall stud location. You should see how far off some of those nails are; you can't draw a straight vertical line, but at least now you can average them out to find the center.I bought this for my Back Surround speakers because they are supposed to be mounted roughly 6 feet off the floor. I was just reading that these should be pointed at the opposite wall, NOT aimed down, so I don't need the tilting feature, which for these speakers made it a bit of a problem mounting. I thought I'd try to balance the speaker front to back, but even up against the wall there's still enough weight on the front end to cause the tilt feature to aim the speaker down. I probably should have removed the plastic washer from the screw so that it has more resistance to tilting.While the mount has side screw holes, I'm just not ready to punch holes in my speaker cabinet yet, plus I'm still testing to see if there's a problem with the speaker too close to the back wall. I may need to pull it away an inch or two, before installing the side screws. I'm actually using tie-down straps around the backside of the speaker, so I won't tempt fate by having the tilt function slide forward and launch my speaker off the mount.
Hesham Noor
Reviewed in Saudi Arabia on December 30, 2022
I love it