Your cart is empty.
Your cart is empty.From the Manufacturer
4mm Domino Cutter for use with 4mm Domino tenons.
Isbel
Reviewed in the United States on September 12, 2024
Very simple tool was used
Casa do Morro
Reviewed in the United States on February 13, 2024
Quite useful
1
Reviewed in Spain on December 15, 2023
Loved
Solveig
Reviewed in Germany on April 19, 2021
Sehr Guter Fräser in Festool Qualität
AJ
Reviewed in the United States on April 26, 2020
Great and Quick
franco70
Reviewed in France on January 10, 2016
comme toujours festool est une très bonne marque, utilisation sur domino df 500 qui est une machine remarquable, une fois que vous avez acheté cette machine impossible de ne pas s'en servir une merveille de technologie.
Keith H.
Reviewed in the United States on April 1, 2016
This cutter is shorter than the 5mm and up cutters. To cut the proper depth mortise you will need to set your joiner for 15 mm. The 15mm setting would give you enough depth for a 30 mm tenon using a 6 mm cutter but only 10 mm with this cutter. Otherwise it does a great job. I think Festool added the 4 mm cutter and tenons as an afterthought so the depth setting on the domino joiner is not correct for this cutter.
joshua c leonard
Reviewed in the United States on February 4, 2014
I ordered this bit to help join 1/2" thick x 7/8" wide slats on a mission night stand.Installation was easy and the cut was perfect. I will say that in small stock like this make sure you don't have the Domino set to any level of "slop" or you risk seeing the pockets after the piece is glued. Lucky for me I made some test pockets prior to working on the actual piece.Another nice feature of this bit is the vase it comes in. It protects the bit from the rest of the bits/cases floating around in the router bit tool drawer.
fredC
Reviewed in the United States on August 11, 2013
I've been using this cutter with an aftermarket adapter on my Domino XL - with good results . Shipment of Festool products from Hartville has been speedy and well packaged as well as free
J Davies
Reviewed in the United States on July 1, 2011
For years I had been frustrated that Festool had not come out with Domino Cutter that plunged less than 15mm. Before the 4mm cutter (which is shorter in length than the rest of the Festool cutters) one had to get creative to make a plunge stop, that was less than 15mm deep. But with the 4mm Cutter, you can easy join 1/2 stock for drawer boxes and the like, without the need for complex depth stops. Also the 4mm dominos are perfect addition to the line of domino tenons. thanks festool.
G. Robinson
Reviewed in the United States on April 26, 2010
If you do small work like putting edging over the ends of Baltic birch plywood its great. The small 20mm dominoes don't go clear through the .5" 12.7mm edging and the cutter doesn't split hardwood (only ½ the length of the domino goes into each side).
Recommended Products