Your cart is empty.
Your cart is empty.Stay safer, see further, and brighten your nighttime driving experience with our All Lights On®. The All Lights On allows your high beams, low beams, and fog lamps to all be on simultaneously to illuminate the roadway when your high beams are activated. When your high beams are not on, your low beams and fog lamps will operate normally.
Joseph
Reviewed in the United States on March 30, 2025
After watching a few videos on the tube to install this I got it in. It does work and I do use it for extra light on my way to work in the morning.
Brian Anderson
Reviewed in the United States on March 13, 2025
Simple install and good results. Highly recommend
Sam P.
Reviewed in the United States on February 5, 2025
Works great really cool to use all my lights at the same time easy to install a literal monkey could do it literally took me five minutes
Brenda Organ
Reviewed in Canada on February 14, 2025
This product took me and my son a little longer to do probably only about 45 minutes max but it worked just as it was supposed to. just remember if you buy this use pliers to pinch the wire with the little piece tried it with just my hands and it didnt work 👍👍
The Greggs
Reviewed in the United States on February 11, 2025
I live in a rural area, we have no street lights.This helps get the lumens up so I don't hit a deer.No drawbacks I have found.... Except my back hurting a few days from being under the dash when installing.
Andy G.
Reviewed in Canada on July 6, 2024
Follow the instructions (included), 5 minutes job.Works great.Recommended
CW
Reviewed in Canada on March 1, 2024
The media could not be loaded.
John
Reviewed in the United States on February 26, 2024
I had heard of reviews saying that the instructions given were not correct. However in my case everything was correct and instructions were well written. The reason for 4 stars is it was a pain to install since the piece is decently big. Otherwise everything worked great no problems.
Customer
Reviewed in the United States on November 1, 2024
there is a scan qrc code on the package so you can view the correct installation instruction (pdf read format). it is very important to USE ONLY those instructions that are effective for your year model car/truck. the wiring and procedures are slightly different even on the same model but from different year groups. And the snap on wire connector is a one time use only. SO CHECK EVERYTHING and before you install it. If you have doubts, then call the company. I did that even though I was pretty sure I had everything right. It just helped me to KNOW that I had it correct before making that final snap in piece. Now I have fog lights that operate at the same time and my high beam headlights. The only thing I would say that isn't made clear: the fog light instrument panel (dash) light icon turns off when you go to high beams, even though the fog lights remain on. So this little module does not "fix" that little annoyance. But the fog light does remain on when high beams are on. The fog light dash light does come back on when you turn the high beams back off. I think the reason this was not engineered with this hack module is because that would require actual wiring modifications back up to the fuse box where the headlight and fog light relays are located. Or conversely this could have been solved by new wiring modification to the high beam left column stick switch. In either of those cases, it would have involved quite a bit of wiring changes and probably way over the experience of the typical DIY. I can live with the fog light dash light not operating when the fog light is on...that's a small annoyance. For me, the fog lights are 6000 LM amber yellow, so I can definitely see them when they are on.
tester
Reviewed in Canada on March 14, 2023
Easy install all of about 15 min to put in and work good so far. Sell even did price match after I ordered it as I found it cheaper.
Pat'nTaraC.
Reviewed in Canada on February 8, 2022
Work's great! The installation was nothing like what was said in Fleece Performance's site about the Terrian being like the Traverse/Outlook/Enclave/Acadia/Equinox. Witch they are wrong about the BCM plug being the black one. Its more like the sierra/silverado bcm plug. Brown plug. Could of been a chaotic scene connecting it to the wrong plug! Good thing i made sure and paid for a brake down schematics of the bcm plug's and figured out from there it was the Brown plug! not the black. FYI.for peeps who might need it. Totally recommend this product, its the best mod every vehicle should get"if its applicable for there ride".
A. Harrison
Reviewed in the United States on December 2, 2022
Just finished installing the All Lights On mod. The instructions on the Fleece website were easy enough to follow without any confusion. The install was straight forward without any real difficulty. However, I spent by far the most time trying to access enough space from the wiring harness by removing that thick and sticky wire wrap that GM installs on the harness. I spent about 30 minutes trying to remove enough so as to install the mod. I will admit, I was a little nervous about pulling wires loose from the pins so I took my time to do it carefully . . . but successfully. In any case, it's installed and working flawlessly and I have no complaints. Not counting the 30 minutes on the harness wrapping, I would say it was a 10 minute install to get a workspace light, remove the harness, find the correct wires, press in (mount) the wires to the unit, add a zip tie for extra measure, plug in the harness, and test the lights. All good.Didn't feel the need to include a pic because there are plenty pic and videos out there and my install didn't look any different from those already published.
Jonathan W Hays
Reviewed in the United States on April 20, 2021
First, Fleece has some great documentation about how to install, do not let it make you think this isn't a DIY install. If you know how to look at wires and how to press firmly, this is that easy. Installed to use for safety when the roads are empty. No joke, it took less than ten minutes (could have been 5 if I had done it before). Super quick, not too thick to make it hard to deal with. Looks factory after a little bit of fabric tape, you can use electric tape or no tape at all. It is hard to tell in the pictures, but looking at the ground lighting in the after photo will show you that you have full lighting now. Since it is so cheap, there isn't a reason not to have it. Do not think is it hard to install, it isn't. Only needed the chip, a razor (just to pull some tape off) and 6-7 inches of electrical tape.
Recommended Products
