Your cart is empty.
Your cart is empty. Packing include:
1 * DJI Mavic Pro Gimbal Flex Cable
kristin yousif
Reviewed in Canada on March 16, 2025
The ribbon ripped
Charles Stewart
Reviewed in the United States on May 14, 2024
The product worked, but the adhesive did not stick.
Gilles
Reviewed in Canada on October 14, 2024
Livraison rapide et produit en très bon état malgré la fragilité de l'emballage
Javier M.
Reviewed in Mexico on May 8, 2023
Cambie a este proveedor y no me funcionó. Compré uno en mercado libre dos veces más barato y mucho mejor calidad y funcionó muy bien
Clifford B.
Reviewed in the United States on January 4, 2022
It worked and got my Mavic Pro going again but their isn’t much adhesive and not very sticky. Seems to be a problem with all of this type ribbon. I wish DJI still made parts for the Mavic Pro.
bobbydoylemusic
Reviewed in the United States on April 20, 2022
Ribbon cable came to me with a defect. A copper trace was showing through the cable at one of the several dimples on the cable. Completely useless.
Dave Lovely
Reviewed in the United States on August 23, 2020
The YouTube video for how to fix your DJI with this ribbon may look complicated but you can do it. This ribbon worked perfectly and saved me hundreds of dollars it would have cost to send the drone off for repair not to mention that I could do the repair the day I received the ribbon in the mail. Good luck! This is the real deal. It works.
CodeTalker
Reviewed in the United States on December 17, 2019
I've installed three of these so far. No issues. Wish there was a little more sticky area but good ribbon.
Beau Chevassus
Reviewed in the United States on June 13, 2017
All fixed!Our DJI Mavic Pro had a broken gimbal. Basically every time you started up the drone, the gimbal would just slam the camera around. Nothing worked to fix it. No amount of calibration. It turned out it was the gimbal flat ribbon all along.Note: The installation instructions are complicated, but with the right walk-through video, it'll make all the difference. The best tutorial you can find on YouTube. The video is called "(updated version) DJI Mavic Gimbal Motor Overload Fix - Repairing Ribbon Cable." Excellent instructions!I am delighted and tickled that our $1K drone is up and running without having to send our drone into DJI's horrible customer service. (seriously last time we sent it in, it took them 2 months to even get the parts to fix it. It was also $380 to fix everything. NEVER send your drone to DJI for repairs, even if you have the "DJI Care" plan. It's not the pricing per se, it's the rediculous amount of time they have it. And when they send it back, there's no promising that it's fixed, like in our case). Thankfully we were able to fix it on our own.
JV
Reviewed in the United States on December 10, 2017
This cable is a pain in the butt to replace. But that's not the cables fault. This fit perfectly, had all the adhesive strips in the correct area, and came with lines that designate where the ribbon cable is to be bent. With some patience, you can do it! My gimbal works perfectly again after my crash now that I have replaced this ribbon.
Jamin1317
Reviewed in the United States on October 9, 2017
Success! My Mavic Pro is in the air again. I chose this cable because it came with the sticky spots (double sided tape). Honestly I don't think that mattered. I would not say replacing the cable is difficult but it was frustrating and time consuming to get the connectors connected.Tips- If this is your first repair I recommend watching the FixaCrash - Mavic Pro Gimbal Disassembly video on youtube.- Cut the rubber glue holding the old connectors in place out of the way.- When done you will need to run the gimbal self calibration or your horizon my not be level.- Make sure the video cable (the silver cable with all the strands) has enough slack on both ends when reassembling. If not it can limit the gimbal from full rotation and or put tension on the connector.
Recommended Products
