Your cart is empty.
Your cart is empty.Product Description
Replacement part for Febco 765 Repair Kit
- All parts work for Febco 765 EBV 1" & 1-1/4" Backflow Preventer and Vacuum Breaker.
- Maximum working pressure: 150 psi.
- Perfectly replace for Febco OEM 905-212, 905-052 & 300-089
- Made of ABS and Steel , it is Lightweight, hard and durable . Canopy is consturcted from Aluminum alloy with Anodized finish. With stable performance and reliable use and longer service life
905-052 Check Valve Assembly Repair Kit
- Part of the backflow protection device to prevent contaminated water from entering the clean water supply system.
- Contains 1*Holder, 1*Screw, 1*Disc And 1*Guide.
905-212 Bonnet and Poppet Repair kit
- Used to replace the broken Bonnet and Poppet and make your sprinkler system working again.
- Kit includes bonnet, O-ring, spring, E-ring, washer, stem, rubber disc, poppet.
300-089 Canopy/Bell Cover
- Place the canopy on top of the metal screw and tighten the small nut just enough to hold the metal bell on the device and still rotate by hand with some tension.
- Notice: Don't overtighten.
Just take less than 10 minutes, no special tools required, to fix your backflow preventer with this febco 765-1 repair kit.
Exact replacement part
Reviewed in the United States on February 28, 2025
perfect fit and works
Kurt
Reviewed in the United States on February 13, 2025
Bought to repair a broken Febco vacuum breaker. Parts looked as good as the originals and fit good. Happy with the purchase. Time will tell on the longevity.
Imetare
Reviewed in the United States on January 22, 2025
they work and seal nicely.
Greg Azimov
Reviewed in the United States on June 5, 2024
My check valve was broken, and I decided to replace everything at the same time, so I bought this kit which included the bonnet and poppet as well as the check valve. Installation was easy, but when a sprinkler system tech came to check the backflow valve system as required by the city, it failed because the poppet was sticking into the bonnet. Fortunately I'd kept the previous bonnet and poppet, quickly swapped it back on, and the backflow test then passed. Needless to say, I'm returning this kit.One other thing, the kit really needs to include the spring that holds the check valve on its seat. The existing spring had taken a set over time, and I had to stretch it out in order for it to generate enough force on the check valve for the valve to seat properly. The tech who performed the test said he sees the same thing multiple times per day in the old Febco valves he checks, and is mystified why the aftermarket kits don't include the spring.His advice - "Always buy original parts".
Esteemed Customer Josh
Reviewed in the United States on May 21, 2024
So, I installed my Febco 765 last summer when I replaced my aging sprinkler manifold, and while I *thought* I had blown out the sprinkler system correctly this past winter (check a vid on the youtubes for proper maintenance of these -- they are DIFFERENT from 20 year old backflow valves!), I missed the part where you need to open the 2 little ports on the side of the device for proper draining. I've attached a pic of what happens when you don't do that. See the neat star fracture on the translucent piece, and the outright broken other piece?Anyway, replacement took less than 5 minutes, and everything worked perfectly after that.
Jim VanBeek
Reviewed in the United States on March 15, 2024
My check valve assembly was damaged in a freeze. Buying this repair kit saved me a lot of money over paying a repair service to fix it. It was a very easy repair and I am sure saved well over $100 in labor charges.
Kathy G.
Reviewed in the United States on November 15, 2024
In preparation for the repair I cleaned off the brass edge with a brass brush and some vinegar on a paper towel laid across the top to soak off the calcium. But it leaked around top.So then I realized that I needed to clean off the rim just below the top with the brass brush as well.Seemed to do the job.Will report back in 28 years if it worked as well as the OEM.Oh. Rapidly opening the ball valve after as instructed caused a water hammer that broke the ballcock connection to a toilet inside. Oh well. The Saltillo tile did need to be mopped anyway.
Dave Mc
Reviewed in the United States on May 19, 2023
Works perfectly…. Exact fit…. Easy to install.
Recommended Products