Your cart is empty.
Your cart is empty.Replacement side Panels for SteelSeries Rival 600 /650
Ashly Lucas
Reviewed in the United States on February 21, 2025
These pads are quite a bit thicker than the orignal pads, and mine starting falling off an hour after I put them on. DO NOT RECOMMEND.
Matthew W.
Reviewed in the United States on January 20, 2025
Like the title states. My order perfectly matches the inserts of the mouse. Easy to remove the old and slipping grips. Wipe down and install the new ones. They feel just like the factory ones that came with the mouse and I'm comfortable with it. I'm sure this will hold up for another 6 months up to 2+ years. I've had my mouse since 2016 and only replaced the pads once in 2022. Issue like others stated is the oil and heat from your hands/environment causes the adhesive to wear. So it could fail sooner. Or if youre lucky like me. Many years later. But why replace the mouse when you can just order these? Only time will tell. But the product meets my expectations upon arrival.
GypsyWicca
Reviewed in the United Kingdom on August 9, 2024
My partner bought this for his mouse he stuck it on his mouse and it didn’t even last a day before it started peeling off very bad quality would not recommend this
Fossilium
Reviewed in Germany on June 26, 2024
Gummis haben eine gute Haftung an der Hand aberder Kleber ist nicht stark genug.An den kleinen Flächen, die auf der Mausunterseite sind, löst sich der Kleber nach weniger als 3 Wochen ab.Leider hat genau gestern der Rückgabezeitraum geschlossen.Habe 2 Sets für meine Maus zu Hause und auf der Arbeit bestellt. Bei beiden ist dieses Problem da.
Bill L
Reviewed in the United States on February 17, 2024
The oils on the skin of your hands gets absorbed by the rubber pads which softens the adhesive and causes the pads to come off. Next time you replace pads, seal them with some clear nail polish first thing before you use them. They will last a lot longer.Replaced the rubber pads a little over a year ago and used clear nail polish to seal them to protect them from the oils on the skin of my hands and the pads are still firmly attached with no sign of them coming loose. I touch up the nail polish coating I put on the pads from time to time because it does peel from friction but nail polish is the solution to the problem. Or, if you don't like that idea, wear a glove on the hand that drives the mouse.
jmatthes
Reviewed in the United Kingdom on February 26, 2023
I actually prefer these over the ones that comes with the mouse, the grips feel a lot more gripper and with the tape being 3M i have better faith in these lasting longer than the standard ones. get these over the ones sold by steelseries
Hiro
Reviewed in the United Kingdom on January 30, 2023
The rubber pads that came on my Rival 600 were glued on with some very poor adhesive, that had athe rubber pads peeling off weeks after I opened the box.These came with proper 3M adhesive, and also feel higher quality than the stock pads.Update: These will need replacing every few months, but that's more to do with a design defect with the mouse (which SteelSeries is responsible for), rather than this product itself.
70707
Reviewed in Japan on July 23, 2022
Rival650のラバーが強く握るとずれたり、のりが飛び出してきて手がべとべとになったりするのでこの商品を購入しました。材質は少し純正と違いますが、にぎりやすさはそこまで変わらないと思います。そしてこの製品はのりではなく両面テープをくっつけるのに使用しています。これのおかげでくっつけるのが簡単であり、その上将来的にのりが飛び出してくるということはないのではないかと思います。ここからが悪い点なのですが、右手前のグリップの下側がマウスを使うとすぐはがれてきて、これによって摩擦が増える上、マウスパッドとこすれて音がするようになります。これの原因は右側面から下を覆うパーツのため、ラバーが途中で折ってあることと、両面テープでくっつけているからだと思います。他のパーツはそこまで大きくないので粘着力がそこまで強くなくても折ってある部分がまっすぐに戻ろうとしてはがれることはありませんが、右手前のグリップのみ頻繁に起こります。もしかしたら他の部分も起こるかもしれません。これの対処法としては、私の場合ですがラバーをハサミで切って、右側面のパーツと下のパーツにわけました。現在はこれでうまくいっています。完璧な製品かと言われると違いますが、サイドのパーツは現在日本から注文すると１０ドルに送料３０ドルが必要になるため、Rival600/650ユーザーの方でグリップからののりの漏れ、グリップのズレなどがあまりに酷い場合は、選択肢の一つになると思います。
Kristin
Reviewed in the United States on December 23, 2022
Dont expect them to be better than the grips that came on the mouse. They're the same, and will most likely last about a year or so before you have to replace them again. But for $10 and 2 day shipping you cant really complain, they work as intended.Theyre made of the same material, and actually - they dont adhere quite as well.I cleaned off the glue goo from the original set prior to putting these on, and specifically the part that folds onto the bottom if the mouse, it doesnt want to stay stuck. It keeps lifting, and then dragging on my desk mat.They are also just a teeny tiny bit too big for the grip areas. Its nothing causing an issue, but as they wear after a few months I can see they could start to get "flappy".So nothing to rave about. These are exactly what they are, and work as described/intended. They aren't an upgrade. I would get maybe two sets to have another on hand for when these wear out the same way. If you want an upgrade or something different - that site with four letters, with hand crafted stuff for sale has some grips made from racket tape. They cost a little more and take longer to ship, but could be our longer term answer to improved grip comfort on a fantastic mouse.
Joe Eversole
Reviewed in the United States on October 31, 2022
About a year ago, I replaced the original anti-slide pads on my Rivel 650 with these. They fit pretty well, felt pretty good and I went on my day. After about 1 year now, I went to grab my mouse and noticed that one of them had slid about 2cm out of place. I pushed it back and it feels well adhered... but it's clear that it's time to replace them again.
Alex
Reviewed in the United States on August 30, 2021
Anyone who owns a steel series rival knows that the rubber grips on the side have the worst adhesive. It doesn't last, they begin slipping and peeling away after a few months of consistent use. These aftermarket grip pads are the best ones I've used to far. I have used a couple different replacement pads just to see what was out there, what felt good in my hand and what adhered the best. Pads from other sellers are a bit squishier, these are a bit more firm, and soft feeling. Overall, I really recommend this product when you need to replace your rival grip pads.
Ron Christian
Reviewed in the United States on December 18, 2021
Update:After a little time and some use, the adhesive again melted, the pads started sliding around, and the mouse is again sticky and unpleasant to use. I'm beginning to regret the money I spent on it.---I bought this because the adhesive had melted on the original causing the pads to slip and a general sticky feel that made the mouse unpleasant to use.The new pads are a slightly different texture and have a better feel. The fit was perfect and I'm told the new adhesive is less problematic than the original.Tip: Pull off the pieces (they're magnetic) before working on them. The alcohol swab is not sufficient to adequately clean them up. Use cotton swabs and isopropyl alcohol. Clean the little valleys, not just the surfaces. Let the alcohol dry before putting the pieces on. You can move the pieces a little after you put them on, but do your best to get them oriented right to start with. Let them "set" for a bit before using the mouse.Of course, you can buy a mouse for about nine bucks, but since I paid $70 for this mouse, I felt that nine bucks was not too high a price to pay to fix it.Totally satisfied with this purchase.
Eternal
Reviewed in the United States on July 26, 2020
I love steelseries products but these mouse side grip were glue on with terrible stuff. It was slide very easily and come out of place.These replacement grips come with 3M glue which is WAY better than whatever SteelSeries use and they do not move at all once in place. They also make the mouse feel a bit slimmer, Or maybe it just feels that way because the original glue was on there THIIICK and nasty like.Note: When removing the original pads make sure to use alcohol to remove all the glue, let it dry and then put on these replacements.
Recommended Products
