Your cart is empty.
Your cart is empty.The Freeman PFS9 Pneumatic 9-Gauge 2" Fencing Stapler with T-Handle, Adjustable Metal Belt Hook, and Case is ideal for working on heavy duty mesh and woven applications such as such as electrified single wire with insulation, horse and deer fencing, and chain link fencing. This durable and lightweight air powered staple gun is built to last and features depth adjust, quick jam release, an ergonomic body, a comfort grip handle, a wire alignment notch, and 360 degree adjustable exhaust. The Pneumatic 9-Gauge 2" Fencing Stapler includes a T-handle, blow molded case and adjustable metal belt hook, will save time completing fencing projects, and is covered by Freeman's 7 Year Limited Warranty and 90 Day Wearable Parts Warranty.
Critique Extraordinaire ...
Reviewed in the United States on January 27, 2025
Works Great!Installed 350 feet of 4 gauge, 16' x 50" Cattle Panel fencing, to 4x4's & 4x6's, to corral a herd of Rhodesian Ridgeback puppies.Used 2", 9 gauge staples.* Pros * -- Never misfired. Shot 100's of staples. Very solid unit. Nice carry/storage case. Adjustable depth for fencing wire overlap.-- 1/2 the price of cordless.* Cons *-- Pneumatic, need air compressor.Does the job well!
Jeremy Haaksma
Reviewed in the United States on January 17, 2025
Worth every penny spent, fenced in 20 acres 8 ft. high Fence put about 8000 staples through the stapler.
Lisela Guzman
Reviewed in the United States on December 6, 2024
This sure help me save alot of time on my fencing works great , powerful.
T webb
Reviewed in the United States on December 27, 2024
Works great
Rene Dubord
Reviewed in Canada on November 20, 2024
The fencing stapler works well if you have air nearby,
RGD5800
Reviewed in the United States on November 22, 2022
If you have ever nailed wire fence to wood posts by hand you would rate this as a dream tool! Set your posts, tension your fence, and in seconds per post you're done! Wasn't sure about the quality of the tool because I had not heard of the brand before. Just as tough as Senco and of course priced as a fraction of the high priced tools. Of course, you'll have to tow along a portable compression unless you have AG equipment with a bolt on. Sure beats a hammer though!
Joy
Reviewed in Canada on July 22, 2020
Used for making barb wire and page wire pasture fences. Works really well. Save time and is convenient to use.
MikeFromEnderby
Reviewed in Canada on October 13, 2020
This thing will whap a fence staple in like it's nothing. I stapled up a 400' stretch of 4' pasture fencing by myself in about 2 hours. The prep of stretching the fence and getting everything ready to staple took much longer. I used over 500 staples and I shudder to think how long it would've taken hammering them in by hand, and how many smashed thumbs and fingers I would have. I'm strong enough to use the gun with one hand but there is an auxiliary handle if you need it. With a helper to hold the fencing, a person could use two hands to use it, which would be easier. The recoil is pretty strong but don't fight it, and if your hand is on the wire when the staple is driven it can sting. It is very easy to adjust the depth and the allen key is supplied. With pasture fencing, some staples need to be tight but most are left loose and this is easy to accomplish. I setup a gasoline generator to power my compressor on a trailer behind my golf cart. I also mounted a retractable air line to make it easy to move as I went along. Very efficient, and very fast. I have many hundreds of feet to do yet but I am looking forward to it. I highly recommend this gun.
Lisa J
Reviewed in Canada on September 9, 2019
I loved that with just the pull of a trigger I can put a staple in. If I was using a hammer I would have to hit the staple multiple times. The unit is heavy and takes strong arms and wrists to use.
Chad B.
Reviewed in the United States on April 22, 2019
Great fence stapler. Works just as expected. I have only used it once so far, but took me less than an hour to put in several hundred Staples. With a hammer, I would have been there for several hours and would have likely hit my fingers over a dozen times... Lol...I was most worried about the air requirement, but fortunately it doesn't need much more air than an air nailer. I bought a DeWalt 60v battery powered air compressor to use with this and the combination is great. With the battery powered compressor I don't have to worry about have power in remote areas that I am fencing. Battery seems to last plenty of time on a charge to drive several hundred Staples.This item is expensive and the Staples are expensive, but iny option it is worth the cost. The time saved I believe will pay for itself with my first fence project, which I am getting close to finishing up.
AP
Reviewed in Canada on September 21, 2017
The stapler worked great! We did 1600 feet of fencing with it. It is very easy to clear when it does jam but it only did it maybe 3 times through the whole project! (Almost 2000 staples)
CAPT Seabee
Reviewed in the United States on August 12, 2016
I had some fencing repair and a new chicken yard to help my neighbor build. The heavy duty galvanized staples were the way to go. If you ever fussed hammering those, you'd know a pneumatic tool is the way to go. Using it is great once you learn its peculiarities. First, make sure you use a good air tool oil from the get go. Second, this unit is pressure sensitive. Great at 90psi, cycling problems at 80psi. Third, the latch for refilling the magazine isn't machined to a tolerance that will give you reliability. Don't let the picture fool you. This is probably the largest nailer type tool out there and the side handle is there for a reason. It's a framing nailer on steroids. Although a normal "contractor" grade small 2-5 gallon compressor will work, it's an air hog. It's important for the compressor to maintain the proper pressure. I'm looking for a remote solution to work fencing with my Gator. So far it will be a CO2 solution.
Dillon-MT
Reviewed in the United States on October 12, 2015
The PFS9 Stapler is nice looking and appears well made. It comes in a nice plastic storage box with a set of allen wrenches and an oil bottle. From the factory, this will drive staples slightly below the wood surface, which will cut the wire. The owners manual suggests setting the depth of drive by adjusting the air pressure. I think this is a mistake as the staple depth will vary with wood density. I used the included allen wrench to adjust the nose piece to leave about 1/4 inch space under the staple. I used the 2-inch barbed ST-400 staples and the driver drove them easily in the 100 year old juniper test post.The driver piston appears to be the same size as a 3 1/2 inch framing nailer. I did not think that it kicked back that much and did not need to use the side mounted assist handle. This also gives you a free hand to hold the wire in place.The driver includes a rafter hook that mounts under the air inlet coupling. I don't know if it will be useful or be in the way and need to be removed.I'll update this review as I use the driver more.
Recommended Products
$144.99
$ 71 .99 $71.99