Your cart is empty.
Your cart is empty.Product Description
Tiffany Freeland
Reviewed in the United States on January 25, 2025
I couldn't figure out what to do about drivers seat. Mine has minimal wiggle any way. The passenger seat was not bad to do. For the console side on passenger seat the T40 bolt was a chore to remove but I got it out and installed all the ones I found. They look like 3D printed but that is fine. They removed all the wobble out of that annoying seat. Great job on whoever made them. I have enough extra ones to do it again if I ever need to. 2003 Wrangler X 2 door 4.0l.
jake selman
Reviewed in the United States on September 20, 2024
easy to install and works.super easy to install and works great. whoever decided to do this for TJ's. you are a god send and need to go to the tj fourms and put your product out there. I'm just happy my stuff ain't creaking and moaning now. thanks!
Eduardo HG
Reviewed in Mexico on July 28, 2024
Los bujes se ve que son de mala calidad y mejor no los instalé.
David H.
Reviewed in the United States on July 25, 2024
Just threw them away. Did not fit, did not fix wobble, wrong material. 100% junk, don't waste your money on these pieces of plastic junk.
MI Guy
Reviewed in the United States on June 17, 2024
After cutting off the old ones, these were great replacements. It got rid of the wiggle and squeaking in the seats. Perfect fit on my Jeep TJ seats. I have a 2005.
Customer
Reviewed in the United States on May 27, 2024
Super easy, I did not believe it until I was done with all four in about 20min. Everything else I read online about fixing this issue required removing the seats for some reason, so I thought I was just going to live with it.I tried this on a whim and it was super easy! No seat removal! Great product, worth it for sure!
Robert Mcguire
Reviewed in the United States on December 20, 2024
These fixed the wobbly seats in my daughter's TJ. They didn't come with directions but were pretty easy to figure out. I'd but then again if needed.
kennethcr
Reviewed in the United States on November 13, 2024
So these pieces worked pretty well. Installation wasn’t as complicated as I thought as long as you have torx tools. You may have to sand the rings a bit to get the right measure but ultimately you will be able to replace the old ones, even though it requires a little bit of work.Good value for the money. Rather buy these than any other potential replacement.
DavidP
Reviewed in the United States on January 4, 2024
I bought a molded set of these from another seller thinking those would be better than 3D printed. I was wrong. They did not fit properly so I purchased these instead. The seams that are created from each layer of 3D printing actually improve the fit and function. Kind of works like a knurl for additional grip and It really locks the outer bushing over the split bushing so they can't slide off. My seat is as tight as ever and no more noise.
Okrider
Reviewed in Canada on August 26, 2023
Installed on passenger seat. Doesn’t work. Won’t install on drivers as that still works.Install notes:- wii have to cut off large rubbery ring from riveted stud- I had to remove the seat to access the bolt on the centre console side.
santos
Reviewed in Mexico on December 4, 2023
FALTO UNA RONDANA Y LA LA QUE VA EN EL CENTRO, LAS DOS ENBONAN.EN LA IMAGEN ES LA COLOR NARANJA Y LA CHICA QUE VA EN MEDIO.
Just Joseph
Reviewed in the United Arab Emirates on October 3, 2023
This fits 2015 Jeep Wrangler, no need to remove seat you just to find that sweet spot for the bushing to snug fit.Hint: do not separate the inner spacer, just open it slightly, slide it clamp it on the bracket. Then slide the bushing.
richard astbury
Reviewed in Australia on November 12, 2021
Not worth the effort of removing the seats and installing these. Only lasted a few weeks before two of the bushes flattened off and became useless.
Recommended Products
$35.99
$ 18 .99 $18.99