Your cart is empty.
Your cart is empty.Product Description
Please note: Your kit may or may not have pre drilled holes in the UHMW bars. This depends on which kit you purchase
Kit Comparison
| | USA Made UHMW | |
| | USA Made Tracks | |
| | +/- 0.002" Tolerance | |
| | Includes Color Inst |
| | USA Made UHMW | |
| | USA Made Tracks | |
| | +/- 0.002" Tolerance | |
| | Includes Color Inst |
| | USA Made UHMW | |
| | USA Made Tracks | |
| | +/- 0.002" Tolerance | |
| | Includes Color Inst |
| | USA Made UHMW | |
| | USA Made Tracks | |
| | +/- 0.002" Tolerance | |
| | Includes Color Inst | |
- Imported Hatsbi Brand
- Imported Powertec Brand
- Imported Happara Brand
- Imported Powertec Brand
The perfect DIY sled kit for most any table saw!
Build your own custom sled
Build your sled to your table saw dimensions. The sled is completely customizable and can be adapted to most any saw. UHMW bars will not fit RYOBI
Works saws w/ 3/4 x 3/8 slots
Works with standard 3/4 x 3/8 slots (which most saws do). Will work with job site, contractor and cabinet saws. UHMW bars will not fit RYOBI
Ideal for multiple cross cuts
Larger or smaller this sled can be built to do it all! Perfect for small, precise cuts as well as panel work. UHMW bars will not fit RYOBI
Atlanta GA Based
Proudly manufactured, packed, inspected and shipped from our facilities in Atlanta GA!
Precise, Clean Cross Cuts
Fulton DIY Cross Cut Sled Kit with Real UHMW Bars
While some claim to use "UHMW" material to manufacture the bars, most of them are a cheap grade of plastic that is difficult to mill & is typically sized incorrectly. Our USA Made real UHMW material is a superior quality that allows us to mill them to a higher tolerance. UHMW bars will not fit RYOBI
Lets make sure the UHMW bars fit
Measure Twice, Purchase Once
Before making you purchase, we recommend that you measure your table saw miter slots to make sure they fall within these dimensions. UHMW bars will not fit RYOBI table saws.
Rich
Reviewed in the United States on February 18, 2025
Kit arrived with everything but the promised color instructions. Have an older 10" table saw and both of the sled rail tracks are the same size. The kit rails are not the same size as in width and one needed to have about 1/16" removed to fit. The track for the hold down seams well made.
Charles C
Reviewed in the United States on January 15, 2025
If you’ve never built a sled before, this kit is a good start. I built my first with it and it included all the pieces needed, with exception of the wood.Instructions were pretty good.
Customer
Reviewed in Canada on September 4, 2024
Worked great use it all the time
Paul ivan
Reviewed in the United States on August 21, 2024
These are good quality and at an affordable price.
Ed
Reviewed in the United States on August 10, 2024
I made mine over the weekend... Haven't used it for an actual project yet, but no doubt it will come in handy. I like that it's just the hardware, so it allows me to build it to the size that I'm comfortable with.This is my first time using a crosscut sled, and one unexpected extra advantage (aside from obviously giving me better control over the piece I'm cutting) I noticed is that there is far less sawdust thrown out of the top of the tablesaw simply because there's literally no room for it to come out the top. Nice surprise!
CChow
Reviewed in Canada on June 10, 2024
The slide bars are nice and work well.A regular bolt without a washer is provided instead of a T-bolt.The micro instruction "Booklet" should be titled: Good luck, you're basically on your own.
Customer
Reviewed in the United States on November 3, 2024
all parts are accurately described and quality is excellent. Peachtree sells quality products in my experience.
Momof2
Reviewed in the United States on November 19, 2024
As others have said, this item arrived to me with zero instructions. That's fine, as I can go out and find many instructional videos about how to build a sled.I did have to clean out my tracks on my table saw. Even after doing a really good cleaning, the fit is tight. I had to use sandpaper to lessen the plastic parts. Still does not slide as smoothly as it should.
Jose L.
Reviewed in Mexico on April 29, 2024
Me gustó que llegó rápido y bien, lo que no me gustó es que pregunté que si era compatible con mi mesa Bosco, me dieron a entender que servía para varias marcas. Ahora la quiero devolver.
José Antonio Corzo
Reviewed in Mexico on September 19, 2023
La presentación en la pagina es confusa ya que supuse que el kit incluye el trineo completo y no es así , solo son los rieles y la perilla.
Jim Copeland
Reviewed in the United States on June 4, 2023
After recently purchasing a portable Ridgid 10 inch table saw, I wanted a table saw sled, mostly to provide a degree of safety when working with small pieces. I was amazed at the $$$. So, I chose a kit that was inexpensive and still had the simple features I wanted. It was a pleasant surprise to find that the instructions were loaded with helpful information and were clear and easy to follow. I read through them several times and referred to them many more times during the build. The glitch that occurred was totally my fault, so there is a lesson there. When attaching the high density plastic runners to the wood base, as per the instructions, I located and pre-drilled holes, but made the holes too small for the screws so that when I installed the screws, the plastic expanded, making the strips too wide for the slots in the table. Trying to fix that issue I made it worse by trying to trim them a bit. Now, too small. A project from a few years ago left me with a piece of “Starboard” plastic (also available from Amazon) which is used in marine applications. I was able to cut and fit some new runners and the rest of the build went well. After some touch up sanding and a good coat of wax on the saw table and the bottom of the sled, it glides with no effort. I call that success.
Matt DeChaine
Reviewed in the United States on February 28, 2023
Got the package a day late courtesy of USPS, but it is exactly as described. I read a lot of reviews complaining about having to drill your own holes and having to provide your own wood. Give me a break. Read descriptions thoroughly and all available reviews even more thoroughly. That said, the slides fit my craftsman table saw and the hardware works. The bolt for the thumb screw is a little cheesy, but I wasn't going to use it anyway. This kit is a great price for the guy who is wanting to build his own sled but doesn't want it to have wooden slides. Bottom line, buy this kit, watch a couple different YouTube videos, and build your own sled. Quit whining because you want to pay $30 for a $200 pre-made sled, that's not what this is.
Angel Martinez Rocha
Reviewed in Mexico on June 25, 2021
Sería estupendo que la guía viniera en español.
Recommended Products