Your cart is empty.
Your cart is empty.Product Description
GENNEL G104 100g Tube Features
- High Performance
- High temperature resistance
- Low thermal resistance
- Non-Electrical Conductive
- Non-corrosive ,Non-toxic
Working principle
Filling the gape between heating element and the cooling device, Increasing the contact area so as to achieve the soundest thermal conductivity effect.
Helps disperse the heat from CPU to heatsink effectively.
Safety Application
Non-electrical conductive,non-volatile, flame retardant, which eliminates the risk of short circuit and discharges and corrosion damage to the chip and the radiator.
Long-lasting and stable performance
Excellent ease of use and outstanding long-term stability.
Wide working temperature
Wide working temperature: -50℃ to 300℃ (-58℉ to 572℉)
Wide range of applications
Suitable for: CPU, GPU ,heatsink, ovens, chipset, Xbox,PS4,PS5, High power LED and other components.
INSTRUCTION
1. Clean the surface of CPU heat sink
2. Apply the thermal grease on CPU or heat source
3. Spread the grease evenly
4. Install the cooler
James Mars
Reviewed in the United States on February 28, 2025
I work on computers. This thermal grease is very useful for sticking NVME SSDs to their heatsinks and thermal pads to keep the NVME drives cool. Large quantity for the money. One tube doesn't cost very much but if used wisely can be save the longevity of many NVME drives, saving money in the long term. I'm very satisfied with my purchase and am personally recommending it to other people to work on computers with NVME drives.
Buddy Dave
Reviewed in the United States on September 15, 2024
Well-thought-out product, with good packaging and a tiny spatula and nozzle. Somebody was thinking over there in product design. Can't say how well it will dissipate heat, but I assume it will do its job.
TMR
Reviewed in the United States on August 11, 2024
it did its job!
Hutch
Reviewed in the United States on November 11, 2024
Seller quick to shipProduct received as advertised and in good condition👍 I would order again from this Seller.😎
Namae
Reviewed in the United States on April 18, 2024
Use this paste for any thermal interface that goes heatsink-metal and you will see a sharp reduction in your thermals.I have been using this for years and most recently it comes to mind how much it improved my old nintendo switch performance once applied, such a good refresh to old electronics!
B. Lowery
Reviewed in the United States on May 20, 2023
I had to upgrade the ignition system on my 91 Buick LeSabre. So, i already had bought a large ignition control module, that needed a good thermo paste spread across the bottom of it, to keep it cool and prevent it from overheating. It is hard to find thermo paste at most autoparts store, and if found it may cost a lot for just a little pack. So, i bought this thermo paste through Amazon, and i ordereded a big tube in case i needed more than expected. So far, i am pleased with this thermo paste, and it keeps my ICM cool. The paste draws heat away from the ICM, to keep it cool. I think this paste can keep my ICM cool up to somewhere over 400° Fahrenheit, and thats good enough for me. I still have plenty thermo paste left over, if ever needed again. Just spread a thin layer across the bottom of your ICM, and install it. This thermo paste seems to stay in place pretty good, and it comes with a small spatula and a small screw on nozzle to spread it. Make sure to check inside the package that the thermo paste comes in, because the spatula is clear colored and small, but you will need it. This tube of thermo paste is enough to do many ICM's, and the tube is about 6 inches long by 1-1/4" wide!! Store your unused thermo paste in a cool area and it should last for years, if you ever need it again....Overall, i am pleased with it.
Juli
Reviewed in the United States on April 14, 2023
Good quality and good quantity for good price. I used it to replace dried old heatsink paste in a water distiller, and the unit runs much better now. You cut the applicator top to make the size of bead you want. Generous amount in tube-- I put tape over the end of the cut applicator and put it all in the ziplock bag it came sealed in, to prevent drying out in storage until next time I need to use it.
Bruce
Reviewed in the United States on April 2, 2018
this tube will last me for years
Recommended Products