Your cart is empty.
Your cart is empty.Product Description
Key Product Features:
Complete
Complete set 10 inch big clear housing,with plastic wrench,screw and metal bracket.Housing only, filter cartridges are sold separately .The clear housing allows you to see when you need to change filters and everything else works as it should.
Pack of 2 sets.
Air release valve
Equip with pressure release button for high pressure .
How it works?
Please refer above photo.
Specification:
Maximum Pressure: 80 psi ,SUGGESTED WORK PRESSURE: UNDER 50 PSI ,Temperature:40-110°F/5-45°C , Shelf life: 5 Years.
More valuable information:
1. What is dimension of the big clear housing?
ANSWER: It is standard sized housing for 4.5"OD x 10" height filters .
2. What is in the box?
ANSWER: 2 x 10 inch big CLEAR housing with pressure release , 2 x plastic wrench ,2 x metal bracket and 2 bags screws.
3.What is filters options?
ANSWER:1).PP spun filter, Remove sand, dirt, sediment. life time:6 months.
2).Carbon block filter, Further remove chlorine, taste & odors, very fine particulates. life time:6 months. PS.The Life Time of the Filter Cartridge Depends on Usage Amount and Feed Water Quality.
Note:
1. Please lubricate the o-ring with silicon grease and use wrench provided to prevent leakage. you may search "whole house water filter " on YouTube, there is some video about this housing, it is very helpful if it is the first time to install it.
2. Protect filter housing from freezing.
3. This filter housing has a maximum operating pressure rating of 80 psi, if you suspect that your water pressure will at any time exceed 60 psi, a pressure regulator MUST BE INSTALLED before the filter housing. this action will guard against the water pressure exceeding the maximum pressure rating.it is recommended that the pressure regulator be set at 50 psi or less.
4. The rubber o-ring provides the water tight seal between the cap and the sump. it is important that the o-ring be properly SEATED IN THE GROOVE of a water leak could occur. below is more options for matched filter cartridges and similar size housing:
Kindle Customer
Reviewed in the United States on March 23, 2023
After having hired a Plumber to install the 2 filters the top of the filters started to leak - I contacted my Plumber he said it is the actual filters leaking - at where the brass fitting is pressed into the plastic top of the filter canisters.I did ask the the company to replace the tops they did they sent out 2 new tops however they sent the tops in a mail plastic bag sleeve well when Amazon Dropped them off the inside of the filters were broken and chiped.After spending money on the 2 filters, 2 the filter cartridges and then paying a Plumber to install these filters I am now trying to get my money back.I am going to be buying another product from a different company.I am Very disappointed and frustrated with both the quality and shippping department and customer service from both Amazon and the manufacturer.And it's been days since me and my family of 4 have the use of water because of this filter issue.A Very Disappointed Customer. !
Dan Cerkoney
Reviewed in the United States on December 3, 2022
The only thing it lacked was a drainage system at the bottom. Maybe some models have it and I missed it. I’ll install my own. The filter seating could be a little more definitive.
Barkin' acres
Reviewed in the United States on September 28, 2021
These are the Best filter housings I have used. I had a GE and another brand, but htey were difficult to change filters with. These GeekPure housings are very easy to make filter changes with. I highly recommend these. I use six of them between my two houses with my well system.
Royd
Reviewed in the United States on July 26, 2021
These work great, no trouble installing.
teri anderson
Reviewed in the United States on January 24, 2021
Several others have left similar comments and I should have listened. The female inlet/outlet threads are very loose and will not seal with the use of teflon tape alone. I also attempted to seal with liquid pipe sealant and this did not even come close to sealing the threads. Unfortunately, I had to store these for a while so I can't return them now and there is no way I can find to contact the seller. I would look elsewhere for a product that doesn't have this problem. You've been warned.
MAR
Reviewed in the United States on September 18, 2019
One of the housings installed ok. The other I had to try several times to get the brass insert rings to seal.
M. B.
Reviewed in the United States on August 9, 2019
I have a very tough water situation, where I have to purify pond water for drinking, using a pair of these filters to clean the dirt out of the water before treatment saves chemical usage. Had them about a month, working OK.
Anna Shapovalova
Reviewed in the United States on November 11, 2019
Was unable to seal the threads using PVC piping and connectors. Have had no problems with Pentek or Culligan brand threaded inlet/outlet ports leaking.
Recommended Products