Your cart is empty.
Your cart is empty. M.2 PCIE Adapter Card Support M.2 NVME(M-Key) +SATA (B-Key) SSD , Support PCIe x4 / x8 / x16 slot.NOTE: It will not fit the PCIe x1 slot.
Supports 22110/ 2280/2260/2242/2230mm size NVMe M.2 SSDs.
Compatible with Windows, M*ac & Linux OS and no driver required.
2 LED indicators：2 hard drives are equipped with 2 LED indicators and the operation is simple and convenient. Two hard drives correspond to two LED displays before the SSD is connected to the LED. The LED indicator lights automatically when the power is connected and data transmission.
There are 4 fixing holes on the board, which are 22 * 30 mm, 22 * 42 mm, 22 * 60 mm ,22 * 80 mm and 22 * 110 mm
Package Contents:
1 * PCIE to M.2 M KEY &B KEY NVME Adapter Card
1* 8cm Low profile bracket.
1*12cm standard PCI bracket
1*Screwdriver
3*Screws
Pay attention:
1.You have to find out whether your mainboard is NVME-capable at all. Most old mainboards should have received BIOS updates in early 2015 that add NVME functionality. But you have to check that on the manufacturer's website!
2.To add an NVME drive as Windows boot you need both BIOS support for NVME boot and a recent version of the OS that has inbuilt NVME drivers.
3.For Windows that means you need Windows 8.1 or 10 to easily install this as a boot drive. 4.A litter tips:Maybe was impossible to find the right drivers if the Windows 7 updates stopped.You can try to dual boot with Windows 10.
